i figured it out and it is a nice upgrade. For those who want to do this is the future and get the 7 wire one like i did it is super easy. here is how
1 get mirror from local junk yard make sure to take the sensor that is located by passenger headlight behind the grill. I got mine out of a 1999 surburban it has the temp auto dim and compass also make sure u take the plug for the mirror and as much wire as u possibly can.
2 I installed the sensor behind the grill i used the hood latch bolt in the middle to hold the sensor in place then ran the wires behind the drivers headlight area and across the fender into the cabin through the firewall.
3 i then took off the drivers A pillar cover and the drivers door rubber molding and kickpanel along with the sun visor
4 remove old mirror by inserting a small flathead screw driver into the slot and releasing the inside clip. if u dont have a small flathead u can use a small allen key or a coat hanger just stick it in and push till the mirror slides
5 install new mirror by sliding it on and tightening the torx head screw onto ur existing mirror bracket
6 the plug for the mirror has 7 wires pink-black-light green -grey-pink-dark green with black stripe-and brown you only need to use 4 wires which are the 2 outer sides on each side the pink is positive black is ground and the green/black and the brown go to the sensor just match up the wires. the other 3 wires grey pink and light green can be removed by using something pointy and removing it from the plug by pushing prong down and out.
7 run the wires along the headliner and down the A pillar to under the dash where u can connect with the sensor wires. i plugged into my fuse box for power n grounded it to a bolt by the fuse box.
8 plug in the plug into the mirror and enjoy ur newly installed mirror and never be lost again thanks to the compass or blinded by bright lights since it auto dims to a nice green tint(mj)
[/IMG]