I need more head!!!!!

[MPNick]

Now I'm not saying that this is what happened, I can only tell you from what I have experienced.

Hold on there one second partner. If you mean to say that we sparyed NOS into the engine you are well off base. We did all of the dyno runs at our MPI dyno day. All cars were there with the hoods wide open for all to see. There was not then and is still no NOS going into the engine. We have it because the intercooler is on the small side for the power we are looking to now make. Our early goal was 300 flywheel hp. When we got done building the car we knew that the core was to small. Next dyno day you can come in and help me remove the NOS bottle from the car and unhook the NOS line. You can take as much time as you need to look over the car from top to bottom. Just in case you find something I may have forgot that I did. That power was for real. Anytime anyone want to see it run on the dyno just let me know.

Man you hurt me real bad with your post. I will get over it.

 

[BlkZoomZoom]

lol. I'm not eactly sure if you thought I meant you had nitrous injected in the engine. Because thats not what I meant.
I was purely stating facts on what I have seen when the NOS intercooler sprayer was used on the dyno. The nitrous after going through the intercooler made it into the airfilter, therefore the engine. Wether this happened in your case I have no idea, If it did I'm sure you of all people would have known. Never seen the car or the dyno fan, or anything.

 

[MPNick]

The nitrous after going through the intercooler made it into the airfilter, therefore the engine..

That would be real wild. To make 46 whp from NOS over spray would seem hard. That much NOS would lean the engine out. How did they add the right amount of fuel in order not to blow up?

 

[BlkZoomZoom]

lol. They didn't even know it happened until they read back the a/f ratio data. Yeah it went real lean.

 

[yellerandahalf]

look no further than MAM

I was wondering if anyone knows of a company that sells ported and polished heads for the mazdaspeed. Also a good place that sells cams? I have a local shop that does great work, but I can't afford to not have my car for 2+ weeks. And I also haven't found any cams yet. Help, please!!!

Beau told me that he may be looking to sell a few ported and polished heads for the mazdaspeed, since he has a lot laying around from FS motors he's built shortblocks from. He also says he has some turbo cams for the MSP coming out shortly, so contact him (Mental Addiction Motorsports) for that info. later