- :
- '13 CWP MS3 & '16 Mazda6 GT
yeah after looking at how the rad mounts on the bottom, I dont really care to move it over.
How To: Ebay FMIC
- Thread starter Wagonbacker9
- Start date
I guess I can see the difference between my install and cleverfrog.difference is that with mines u can keep everything to it's stock form(radiator,fans,etc) and with his u would have to remove or trim the drivers fan and move the radiator over a inch to do the hot pipe side like his.I like the fact that I can keep my fan and everything in it's place but I like the way his hot side looks compared to mines. It's more reliable his way as far as the couplers not coming off.wish we could have both lol. Well I guess we can if we use slim fans. Hmmm
- :
- '13 CWP MS3 & '16 Mazda6 GT
Well **** off! The shop that was supposed to get my couplers today is now telling me theyre on Back order....**** them.
I just ordered 4 Mishimoto 90degree couplers on ebay for $10.80 a piece shipped. Guess the install has to wait another week and the car will just have to sit...
I just ordered 4 Mishimoto 90degree couplers on ebay for $10.80 a piece shipped. Guess the install has to wait another week and the car will just have to sit...
That sucks. Why did u get 4? I know u can use 2 for the intercooler ends and maybe one for the throttle bodie but what's the 4th one for?remember that if are doing it the way that I did,u need a long 90 degree for the hot pipe.It does say obo on the eBay mishimoto listing.why not make a offer n get them a little cheaper?
- :
- 1989 RX-7 GXL Blaze Red
Yes, I eliminated the old SMIC and the push fan. I'll be getting a slim fan or 2 this weekend. I dont really like the original pull fan(since one of the mount brackets broke).
- :
- 1989 RX-7 GXL Blaze Red
evil you shouldve ordered from siliconeintakes.com
Wagonbacker9
Member
- :
- 2004 'Hoe
that mean you're no longer in a hurry for that fan? lol
- :
- '13 CWP MS3 & '16 Mazda6 GT
Because they're obviously a pain in the ass to get so having more than needed is never a bad thing and I might play around with pipe routing.
I tried OBO...was ignored. $10.80 shipped is the cheapest I've seen for those couplers anyways.
I tried OBO...was ignored. $10.80 shipped is the cheapest I've seen for those couplers anyways.
- :
- '13 CWP MS3 & '16 Mazda6 GT
correct hahaha
- :
- '13 CWP MS3 & '16 Mazda6 GT
was more $ for no reason...I should have just bought the mishimoto ones when I planned to last week but was told by my local shop they could get them sooner....what a bunch of **** tards.
Not a big deal evilmonkey. But it sucks cuz u already started working on the car. It's a good thing tho. Reason being is because I will be working on figuring out if I can use a piece of pipe on the hot side instead of the long 90. So I will keep u updated on that. I am also waiting for my 2-2.5 reducer for the turbo since my used one has a rip and needs to be replaced.I am thinking maybe a cut in the middle section (U) pipe .
2003.5_MSP
Member
- :
- 2003.5 MSP
what about this one i just need the piping w/ bov pipe... http://cgi.ebay.com/ebaymotors/Black-2-5-Universal-Alum-Intercooler-Piping-Kit-BOV-_W0QQcmdZViewItemQQhashZitem3f08b90e42QQitemZ270729285186QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories#ht_3517wt_941
or this one.....http://cgi.ebay.com/ebaymotors/2-5-UNIVERSAL-TURBO-INTERCOOLER-PIPING-KIT-BLACK-HOSES-_W0QQcmdZViewItemQQhashZitem43a32ddc94QQitemZ290500500628QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories#ht_4319wt_941
or this one.....http://cgi.ebay.com/ebaymotors/2-5-UNIVERSAL-TURBO-INTERCOOLER-PIPING-KIT-BLACK-HOSES-_W0QQcmdZViewItemQQhashZitem43a32ddc94QQitemZ290500500628QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories#ht_4319wt_941
Last edited:
Wagonbacker9
Member
- :
- 2004 'Hoe
for double that price, I'll send you a full kit with a REAL BOV instead of some knockoff BS valve, and for another $50, I'll throw in a FMIC core.
2003.5_MSP
Member
- :
- 2003.5 MSP
i already have the core....can you send me a pm with the price you want to let it go for?
Wagonbacker9
Member
- :
- 2004 'Hoe
piping kit, with HKS SSQV v.3, I'd ship for 200.
2003.5_MSP
Member
- :
- 2003.5 MSP
is the piping already cut for msp? and if so how did you route it?
Wagonbacker9
Member
- :
- 2004 'Hoe
I'm the OP for this thread, a full demo of what I did is the beginning of this thread.
2003.5_MSP
Member
- :
- 2003.5 MSP
o but i thought you ended up rerouting the pipe so it wasnt hanging out below the splash guard, thats what i meant by the routing question
- :
- 1989 RX-7 GXL Blaze Red
Ill be honest here. You dont use half of the pipes
2003.5_MSP
Member
- :
- 2003.5 MSP
so what would you suggest?
