hks type 0 install

[AFaceInTheCrowd]

i just bought this like 20 min ago. now i need to find where to put the rpm signal wire. which wire on the car is it or which ecu pin should i connect the turbo timer to?

 

[Dexter]

i said **** going to the ECU, i tapped into the gauges..

if you take out the gauges, the wires are on the second harness from the left,
purple/white is tachometer
and green/red is speed

the red in the green red kinda looks brown really...the wire is closer to the right side of the harness

 

[AFaceInTheCrowd]

wooh! you rock dex. but do i take apart the whole dash for that?

 

[Dexter]

okay, see where the red LED for the security system is? that black plastic panel has two screws up top. unscrew those, and that plastic peice snaps up/out. (you might have to disconnect the LED, its pretty hard to remove without doing that. then there are 3 screws for the gauges, pretty simple. i found it easier to do that go digging for the ECU and tapping that s*** and running long lines or whatever, since the timer is gonna be right there anyways, why not tap the gauge lines, says i