Greddy Profec B Spec II wiring question

[02p5]

Bought a Greddy Profec B Spec II used off a fellow member. The plug to the valve unit harness connector is missing so I will need to hard wire these wires into the EBC. The power connector plug is fine.

For those who is familiar with this unit, there is a green and white wire with a plug connected to the back of the Profec. I was wondering which wire goes left and which to the right side of just that plug.

Hope this makes sense. Here is a pic to help. (uhm)

TIA

 

[smo0f]

hi. (<-fellow member). i had the same question myself when i was installing it. lemme look around for you. my gut tells me white on left, green on right, since white is usually positive and left is usually positive.

 

[02p5]

hi. (<-fellow member). i had the same question myself when i was installing it. lemme look around for you. my gut tells me white on left, green on right, since white is usually positive and left is usually positive.

hehe, thanks for selling it to me. 50/50 chance but don't want to take the risk. Thanks

 

[smo0f]

http://www.msprotege.com/forum/attachment.php?attachmentid=99791

not the same model boost controller, but same harness wire. white left, green right

 

[02p5]

http://www.msprotege.com/forum/attachment.php?attachmentid=99791

not the same model boost controller, but same harness wire. white left, green right

I'm sure the wiring is the same as that unit.
Thanks Smoof

 

[smo0f]

no doubt