GI: Stealth Sub Box

Alright guys. I have been wanting to buy one of those stealth sub boxes for an 8 inch sub. I haven't seen any group buys for them or anybody making them. So I made my own. I decided to make a mold and help others out. I wanna get a group interest to see if people want one. Just want it to be worth my time to make them for you. I'll post picture of my final project this weekend or early next week. Remember this goes in where the jack stand goes. And it's only an 8 inch sub.*So start a list if interested. I'm thinking 120 shipped. Maybe a little less.

 

[rsvinylgraphics]

for what vehicle

 

[sdb318]

My bad. 04-09 Mazda 3 hatchback.

 

[rsvinylgraphics]

Do you have pictures? how is the sound? can you make a decent audio clip to give somewhat of an idea of how it sounds?

 

[speedracr79]

Your gonna have to get approval from Antoine for a GB so id shoot him a pm to get the ball rolling

 

[sdb318]

Yeah I can do that. I don't have it completely finished yet. I have to cut the MDF board and attach that to the Fiberglass. I just wanna gauge the interested on it. Cause I'll have to make a mold of it.

 

[sdb318]

I understand I'd have to get approval but this is just a GI.

 

[azuelke]

I understand I'd have to get approval but this is just a GI.

I suggest you start the process now, it can take awhile.

 

[speedracr79]

Yeah thats all i was saying to get the ball rolling on it cause i heard i can take a minure.

 

[nate0123]

Moved to Mazda3 marketplace. The GB section is only for approved GBs.

 

[sdb318]

anybody interested?

 

[speed3sailor]

- Make your own FS thread.

 

[speed3sailor]

- Make your own FS thread.

wtf. i must be smoking crack because im pretty sure i didnt write that

 

[azuelke]

wtf. i must be smoking crack because im pretty sure i didnt write that

No, I did, it shows edited by me. If you have something for sale, sell it in your own thread, not someone else's.

 

[ndimen01]

I'm interested possibly, are you able to post any pics of the finished product?

 

[sdb318]

here in the final

 

[mojozoom]

Just a few ideas based on my experience doing this:

3/4" MDF seems to stick out more than I'd like. If you go with 1/2" MDF it'll be pretty much flush with the interior panels.

Routing a radius on the backside of the MDF will help it fit into the interior panel better as well.

 

[sdb318]

Just a few ideas based on my experience doing this:

3/4" MDF seems to stick out more than I'd like. If you go with 1/2" MDF it'll be pretty much flush with the interior panels.

Routing a radius on the backside of the MDF will help it fit into the interior panel better as well.

Yes the 3/4" MDF will stick out more. I used 1/2" MDF. The Fiberglass sub box and the MDF are fiberglassed together so they will not come apart.

I'm not sure by what you mine by routing a radius on the backside of the MDF though.

 

[AzteCypher]

What holds the box in place?

 

[sdb318]

What holds the box in place?

It's held in by a bolt that screws in how the jack stand would be secured in.