GI: Coming soon! Manual Boost control w/ creep and wastegate control

TurfBurn said:
I'm working on approved merchang member status.. but i have a new manual boost controller coming up for sale. I'm working right now finalizing the MBC, but it is installed on an MSP right now and the car is holding very steady at 9 psi with some minor spikes to 10 psi under certain conditions. Otherwise works absolutely fabulous.

I will also be developing over the next week some add ons to make it so you can improve spool up time by holding the wastegate shut just like an EBC would do. EDIT: Due to some improved components, price will be $49 plus shipping. Shipping costs were higher/more variable than expected.


These units are much nicer than the other MBC's you'll see out there. They have clean locking knobs.. no set nut or set screw to worry about coming loose. They also will have mounting brackets, and all the hardware and tubing will come included. Not to mention customer support!

Our goal is to provide a superior product to the other MBC's out there, and do it for less! This will be a great alternative for you if you are still waiting for an MBC from somebody else, or are starting to look!

If you have questions or anything else feel free to post or pm me...

in the meantime... here are some pics of the test unit installation.

Thanks!

Steve
Hey man Ive been to your website and really want that manual boost controler and waste gate controler but How do I order it (boom01)
 
yep... private message me, or post here.. or FINALLY... we have sales@nsnmotorsports.com

Domino and SMP3000 will be the first to have the MBC's and I'm going to make sure that they are up and running without any issues and then we'll be able to sell the MBC's without waiting any.

We are making some minor machining modifications to the wastegate controller to make it perform a little better and then that will be ready to go. I have one person who is receiving a creep protection setup... so he'll be the first to test it and hopefully we'll have positive results there as well. I'm pretty confident!

We have a LOT of stuff in the pipeline too! But we finish each thing and then move to the next so we don't get too swamped. One of the really exciting things that is in the line is that I have located a possible vendor for me to be able to make any custom sheet metal product you might want. Heat shields like in my avatar, custom stainless steel gauge plates, possibly some plastic gaskets... lots of cool stuff! :)
 
Last edited:
Just an update for all of you. SMP and Domino will have controllers before the end of the week. As long as their installs go smoothly and they are off and running we'll be set to go. I don't forsee any problems at this point! If you are interested in a controller already just email me at sales@nsnmotorsports.com and I'll add you to the list. Then sometime next week I'll ship out controllers for you and you'll be boosting up! It makes such a massive difference on the MSP. We moved it from 7 psi to 9-10 psi and it is a huge difference!

Thanks!

Steve
www.nsnmotorsports.com
 
come on I want to hear some reviews. I am needing a mbc but do not know which one to get. Waiting for some review of this product.
 
LOL... well it's pretty new. The first one ever shipped on Thursday of last week. I'm sure once Domino and I work through his install (which could happen tonight! I'm excited as he is I'm sure) then we'll know the story. Hopefully all goes well, then everyone can get in on these things! We'll be doing everything we can to deal with any issues that come up and any modifications that need to be made. I'll work with any and all of you to make your install as straightforward and simple as possible.

Thanks!

Steve
www.nsnmotorsports.com
 
Looks like we'll be set to go to take orders on 8/12/04. If you are interested email me at sales@nsnmotorsports.com and I'll get back to you from there with more information as to what you need to do and shipping and so forth! You can also check out the website at www.nsnmotorsports.com for details as well!

The wastegate controllers are not completely ready to go yet, still doing some final testing. But we hope to have those officially up to par in the next 1-2 weeks!

Thanks much guys!

Steve
sales@nsnmotorsports.com
 
The MBC's have done well in both SMP3000 and Domino's cars and haven't shown any issue whatesoever. The MBC's are open sale right now. I just sold the last one I had in stock though tonight. So I'll probably build another batch shortly if I get a few orders that come in. Having stock kind of costs a lot of money... but I will do so to make sure turnaround time is good for you guys!

The wastegate controller is functional and we alleviated some of the problems in it. However, it's performance is a little subpar from where I want it to be (doesn't enhance wastegate performance as much as I like.. does it's job, but not as well as it could!). So I'm redesigning some parts of it and sourcing some different components right now to get that in better shape. I'll know how that is looking by this coming weekend.

The creep elimination units work perfectly in our testing, and are available for anyone that needs them!

We have a few more projects in the pipeline after the wastegate controller. Should be some great stuff for you guys... brake ducting, MAF signal modifier, O2 simulator/modifier, hopefully a knock indicator at some point.. and a few other things... I put as much free time into this as I have! So we are working hard.

If you are interested in purchasing an MBC or have interest in any of the other products of the future feel free to email us at sales@nsnmotorsports.com. We are also updating the website regularily now and nearly have it complete. It includes all our current and soon to arrive products.

Thanks!

Steve
sales@nsnmotorsports.com
 
dominoy2k1 said:
ohh knock detector? ohh imma have to start saving some money.
It won't be real expensive (especially if I can figure out board etching to a high enough quality level). But will largely be a reference type gauge. I'll test to see how effective it will or won't be... but we'll see! :)
 
Mine should be here tomorrow and probably will be installed this weekend, I will post a review. I'm going to be running pretty modest boost levels, may jack it up later if I add proper supporting mods.
 
I don't forsee any problems with any MBC at any point as they have really been amazingly consistent and fantastic in operation. But if you or anyone else ever has any problem I'm definitely there to help very quickly and will do whatever it takes to make sure you are happy!

Domino... You'll be the first to receive the wastegate controller once the thing is up to my standards!
 
If you were near madison, WI I would consider it! :) Especially if it in any way helped me promote and sell anything :) And besides with my engine blown and the car in the garage torn apart and me driving my beat up blazer... I don't have anything worth spending the hours I once did to wash!
 
LOL :)

My car was Terry (Spool Innovative Turbo Systems)'s test car. It saw over 16 psi on stock internals, detonation, random testing etc... it also blew during a high speed race where I had been exceding 100 mph regularily for 4 15 minute stints that day alone. So the engine saw plenty to say the least! It was time for it to go basically. The motor also didn't blow because of a problem or a mistake. The rod in cylinder number 4 simply gave up and the motor went.

Now I'm building a new motor that will be ready for the spring. A full forged, port and polish it all (head, intake, whatever else I think of/can be done), valve job, standalone, multi-fuel rail engine. Designed pretty much to give me good reliable power for all my racing!
 
MoJoeTCM said:
looks like my turbonetics i am going to put in this weekend
Some of the other controllers out there are similar and use the same sort of pressure regulator. I believe they are more expensive in a lot of cases. And I also went to GREAT lengths to spec out the MBC to get it's performance to be what our's is. There are a lot of pressure ranges, CFM capabilities, and types of these regulators out there. But we spent a lot of time and money testing different ones until we got one particular type out of them all that really works exceptionally well in comparison to all the others that we tested. I can't speak as to what turbonetics did or didn't do. But I can say ours works great, and as we go along more and more people should be chiming in to that effect as well! Not to mention our fast shipping, included bracket, hose, ties, and instructions and so forth. :D

If you have any problems with your turbonetics or have questions, I am happy to help.

Enjoy the boost!

Steve
 
steve what do you recommend so far as boost settings go, for the mazdaspeed? I have injen CAI, and that is pretty much it. I am waiting for these larger companies like hi boost to create a whole turbo kit upgrade instead of doing piece by piece. Any advice?
 
Back