FYI: 15x10" wheels for $210/per on miata.net (FSP/DSP guys this means you)

[gavin_leslie]

http://forum.miata.net/vb/showthread.php?t=254511&page=1&pp=25

Just passing this on. Emilo had mentioned the possibility of making these wheels but his timeline was a bit too far in the future for me. As I recall he said he would have them in 4x100 and an outside possibility of 5x114.3 as well(the bolt pattern for the NC miata..if they would clear the brakes).

Spacers needed...probably, 15lbs isnt vapor light, but its $210 per wheel and thats pretty damn good for a cast wheel.

Hopefully someone else can get on the boat. Good luck.

Gavin

 

[khaosman]

Oooh I'd buy a set of the 5lugs if they fit a Protege.

 

[Jas00x]

Not sure if that will work.... you are probably going to need a .75" spacer! maybe a 5/8" spacer if you are lucky.
Mine are 5.75" backspace and they fit perfectly.

 

[xelderx]

These would be ideal for my 1st Gen build. I'll have double check the usable backspace on the '94 Protege. I probably won't get started on figuring all that out in time to get in on this buy.