Hello everyone. I am looking to get a newer car at the end of the year so I am selling some of the parts I won't be needing for the Protege.
Complete HiBoost HB-101 Turbo Kit for the 2.0 Protege Sedan and P5 - $1,300--- Sold to user "slipkornvayne"
AutoGrimmig 4-1 Header for the 2.0 Naturally Aspirated Engine with Gasket,
Header to Mid-Pipe Donut Gasket(Actual Mazda Part),
and two Spark Plug Non-Foulers for the Non-Fouler CEL removal trick - Sold to user i12drivemyMP5
I purchased the HiBoost kit from member bradicus18 just a couple of months ago. His original sale post It has every single thing you need to turbo your 5 speed car. Even the Haltech F10X Piggyback ECU (Except for some small hardware needed) The only issue with the kit is one bolt that was broken off in the exhaust manifold. It could be easily drilled out. As described in his original sale...
"HiBoost Turbo Kit
I have been running this kit since about the Spring of 2007. It has been rock-solid reliable for me. I have only run it on waste gate spring boost pressure (7psi) and have always let idle before shutting down. I have only used Mobil1 for oil. I never did get it tuned but enjoyed the extra oomph provided. The kit shows normal wear for about 32,000 miles of usage but is in good shape. I added the HKS SSQV BOV and another fan that did not come with the kit. Some bolts and other hardware may need to be purchased to finish installation on your vehicle as I had to reuse or lost some of the original hardware. Turbo (IHI VF22) has no noticeable shaft play.
NOTICE: one of the studs broke off in the exhaust manifold and will need to be drilled out. Also, I never received a proper fitting from Juan of HiBoost for the return oil line so I made one from Lowes work and have been running it ever since. I will include a PDF of instructions. PM with other questions."
There are not very many of these kits around anymore and they are known to be very reliable. I also have the original PDF of installation Instructions that I will send to you with sale. I am selling it at a small loss to get it sold.
Full Kit
Haltech with wiring
Manifold and close-up of broken stud
Photos to try to show everything included
I will accept $1,300 to my paypal at boser22@gmail.com. Or if you are willing to pick up in the Ft. Riley/ Kansas City/ Northeast KS area I will sell for $1,100 cash
Now on to the Header. I picked it up for $80 plus shipping off of eBay seller AutoGrimmig months ago. It has never been installed and has the two O2 Sensor Bungs welded in with bolts in them, and EGR tube bung. I have also purchased a set of non-foulers so you can do the Check engine light trick, and the donut gasket from mazda that connects from the header to the mid-pipe. These come with at no extra cost.
Everything in the lot
Donut Gasket
Non-Foulers
Another angle of the header
Full header lot at $60 plus shipping costs from my local post office. Also payable to paypal address boser22@gmail.com or $60 cash pick up.SOLD to user i12drivemyMP5
Please PM or directly email me at boser22@gmail.com with any questions. I am able to take more pictures anytime. You can call public dibs on the thread if you want but it will come down to who sends me the full amount for each lot first.
Thanks a lot for taking the time to read my post.
Complete HiBoost HB-101 Turbo Kit for the 2.0 Protege Sedan and P5 - $1,300--- Sold to user "slipkornvayne"
AutoGrimmig 4-1 Header for the 2.0 Naturally Aspirated Engine with Gasket,
Header to Mid-Pipe Donut Gasket(Actual Mazda Part),
and two Spark Plug Non-Foulers for the Non-Fouler CEL removal trick - Sold to user i12drivemyMP5
I purchased the HiBoost kit from member bradicus18 just a couple of months ago. His original sale post It has every single thing you need to turbo your 5 speed car. Even the Haltech F10X Piggyback ECU (Except for some small hardware needed) The only issue with the kit is one bolt that was broken off in the exhaust manifold. It could be easily drilled out. As described in his original sale...
"HiBoost Turbo Kit
I have been running this kit since about the Spring of 2007. It has been rock-solid reliable for me. I have only run it on waste gate spring boost pressure (7psi) and have always let idle before shutting down. I have only used Mobil1 for oil. I never did get it tuned but enjoyed the extra oomph provided. The kit shows normal wear for about 32,000 miles of usage but is in good shape. I added the HKS SSQV BOV and another fan that did not come with the kit. Some bolts and other hardware may need to be purchased to finish installation on your vehicle as I had to reuse or lost some of the original hardware. Turbo (IHI VF22) has no noticeable shaft play.
NOTICE: one of the studs broke off in the exhaust manifold and will need to be drilled out. Also, I never received a proper fitting from Juan of HiBoost for the return oil line so I made one from Lowes work and have been running it ever since. I will include a PDF of instructions. PM with other questions."
There are not very many of these kits around anymore and they are known to be very reliable. I also have the original PDF of installation Instructions that I will send to you with sale. I am selling it at a small loss to get it sold.
Full Kit
Haltech with wiring
Manifold and close-up of broken stud
Photos to try to show everything included
I will accept $1,300 to my paypal at boser22@gmail.com. Or if you are willing to pick up in the Ft. Riley/ Kansas City/ Northeast KS area I will sell for $1,100 cash
Now on to the Header. I picked it up for $80 plus shipping off of eBay seller AutoGrimmig months ago. It has never been installed and has the two O2 Sensor Bungs welded in with bolts in them, and EGR tube bung. I have also purchased a set of non-foulers so you can do the Check engine light trick, and the donut gasket from mazda that connects from the header to the mid-pipe. These come with at no extra cost.
Everything in the lot
Donut Gasket
Non-Foulers
Another angle of the header
Full header lot at $60 plus shipping costs from my local post office. Also payable to paypal address boser22@gmail.com or $60 cash pick up.SOLD to user i12drivemyMP5
Please PM or directly email me at boser22@gmail.com with any questions. I am able to take more pictures anytime. You can call public dibs on the thread if you want but it will come down to who sends me the full amount for each lot first.
Thanks a lot for taking the time to read my post.
Last edited:
