evo 9 enkei rims

[MSLou]

would the stock evo9 enkie rims fit on our cars? idk any of the specs on the rim other then their 17s so id thought id ask if these would fit on my car since im considering getting the rims off a friend. thx.


http://www.caradvice.com.au/wp-content/uploads/2008/05/08evo9front3quarter.jpg

 

[MSLou]

Anyone?

 

[CnoTataymo]

They well fit. The specs are 17x8 with +38 offset. If you're lowered, you'll rub in the rear.

 

[Moultese]

Should fit, but like CnoTataymo said, there may be some rubbing in the rears. Same bolt pattern though.

 

[Silver Ecstasy]

Those practically look like Rota's, why not get a set of those instead?

 

[Wastegate13]

Those practically look like Rota's, why not get a set of those instead?

These are made by a reputable wheel company and could probably be had for cheaper.

 

[GoFast]

may want to check the bore size also

 

[blkspdfreak]

eeewww. why? idk, not my taste.

 

[Kain]

eeewww. why? idk, not my taste.

Maybe it's his taste?

 

[blkspdfreak]

im just stating my "internet opinion" i dont like it.

 

[SuperStretch18]

may want to check the bore size also

(mswerd) Mazda uses a very specific bore size, so you will probably need to run hubcentric rings or have them machined out to fit...

 

[Kain]

im just stating my "internet opinion" i dont like it.

Cool, but you asked him why. That's what I was responding to.

(mswerd) Mazda uses a very specific bore size, so you will probably need to run hubcentric rings or have them machined out to fit...

Luckily for him, I believe the Evo 9 bore is 67.1, which is ours, too.

 

[daonly1around]

Cool, but you asked him why. That's what I was responding to.



Luckily for him, I believe the Evo 9 bore is 67.1, which is ours, too.

really...

anyone know details on the evo9 wheels? weight or what not

 

[daonly1around]

http://cgi.ebay.com/ebaymotors/17-F...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

 

[wisniaPl]

i have 18x8 38 offset and 235/40 tire on stock suspension and it dont rub so i think if its 17 inch rims you should have any problems even if you are lowered

 

[daonly1around]

why not look into the BBS wheels that came off the MR edition?

 

[SuperStretch18]

Cool, but you asked him why. That's what I was responding to.



Luckily for him, I believe the Evo 9 bore is 67.1, which is ours, too.

Good deal! I didn't think many other companies used that bore size. I did notice that the offset seems a bit low (+38). Stock is, what, +52? Make sure that's not an issue either...

 

[MS3BOOST]

i have seen a ms3 with evo 8 wheels somewhere on here or the other forums