Evil MSP graphic... now in Vinyl form and kicking ass... who wants one?
- Thread starter DistantTea
- Start date
Bijou-MP5 said:oh thanks, good thing it's all been fixed
keep us posted KBicknel
Yeah.....they said they ouldnt read the file. Not sure why, it was just like the other two we sent. That delayed things by one day but everything is on track. I am excited to see all of them. And I am getting my name for my helmet. I have a race Sunday so I want it before then.
Kristi
Devil-MSP said:
At this point, the order is placed (and probably completed and on it's way to us) money is in so we can't add to our order. If there is enough interest, we may place another order in the future. Just keep an eye out on the board to see if we post again.
Kristi
We have opened a cafepress store selling t-shirts and other items of this logo. If anyone is interested, here is the URL:
http://www.cafeshops.com/evilmsp
Kristi
http://www.cafeshops.com/evilmsp
Kristi
Phutcherso
Member
Those baseball tees are tight!
Good to see everything is on schedule... I can't wait to get mine!!!!
Good to see everything is on schedule... I can't wait to get mine!!!!
Phutcherso
Member
Got my vinyl today! I am stoked about putting in on tomorrow! It looks awesome! Thanks again!
Glad you like it. If anyone has any questions about application, here are instructions I found online.
Adhesive Backed Vinyl Application Instructions - Dry Method
Clean the surface well to avoid dust and oil under the vinyl.
Read all our directions first.
Without removing the backing, place decal exactly in the position it is to be located.
Tape everything temporarily into place with masking tape.
Step back and see how it looks
Once applied, it cannot be repositioned.
Measure twice to assure accuracy, measure from the flat areas on numbers and letters.
Apply a piece of masking tape across the entire top edge, to make a hinge.
Fold the decal back along the tape hinge.
* Remove the backing, revealing the sticky side.
CAUTION: Do Not allow the decal to fall freely on the suface.
** Hold the decal away from the surface. With a squeegee (plastic spatula, bondo applicator ...) carefully begin squeegeeing down the top 1 to 2 inches along the top edge. Work from the hinge down, squeegee down and out over the remaining decal area, be careful not to trap any air bubbles behind the vinyl.
Remove the transfer tape by slowly peeling it back from the decal.
The decal will remain in place if it has been firmly applied.
If any air bubbles appear, puncture wiht a pin and squeeze the area to flatten the bubbles.
Tiny bubbles will dissappear over time with the heat of the sun.
Adhesive Backed Vinyl Application Instructions - Dry Method
Clean the surface well to avoid dust and oil under the vinyl.
Read all our directions first.
Without removing the backing, place decal exactly in the position it is to be located.
Tape everything temporarily into place with masking tape.
Step back and see how it looks
Once applied, it cannot be repositioned.
Measure twice to assure accuracy, measure from the flat areas on numbers and letters.
Apply a piece of masking tape across the entire top edge, to make a hinge.
Fold the decal back along the tape hinge.
* Remove the backing, revealing the sticky side.
CAUTION: Do Not allow the decal to fall freely on the suface.
** Hold the decal away from the surface. With a squeegee (plastic spatula, bondo applicator ...) carefully begin squeegeeing down the top 1 to 2 inches along the top edge. Work from the hinge down, squeegee down and out over the remaining decal area, be careful not to trap any air bubbles behind the vinyl.
Remove the transfer tape by slowly peeling it back from the decal.
The decal will remain in place if it has been firmly applied.
If any air bubbles appear, puncture wiht a pin and squeeze the area to flatten the bubbles.
Tiny bubbles will dissappear over time with the heat of the sun.
