Dragger's Guide: Mazdaspeed Protege Quarter Mile Bragging Rights

[sandspeed]

I will for now, but im considering either the GT28RS with the .86A/R, OR the GT2871 with the .86A/R. Im leaning more towards the GT2871, since its only like $50 more. And I think the GT2871 is the biggest turbo i can run with the MAM manifold, and keep the turbo at the factory location.

cool, I would go with the 2871R. You might as well since you have the cams to make the topend power etc..

 

[slomsprotege]

is anyone still moding this thread?

 

[Metal MP5]

PM BlkZoomZoom

 

[blthlt]

I ran a 13.16 today. Ill post up the video and timeslips when I get back home to my HOME PC.

 

[sandspeed]

I ran a 13.16 today. Ill post up the video and timeslips when I get back home to my HOME PC.

very nice your almost into the 12s! Was that on street tires/ radials? Raise the boost a pound or two and hit 12s or use some slicks. What was you trap speed?

 

[blthlt]

very nice your almost into the 12s! Was that on street tires/ radials? Raise the boost a pound or two and hit 12s or use some slicks. What was you trap speed?

Thats on street tires and pump gas at around 15 psi. My traps were 108 with a 2.1 60' time.

 

[sandspeed]

Thats on street tires and pump gas at around 15 psi. My traps were 108 with a 2.1 60' time.

great 60ft and trap speed.

 

[blthlt]

http://www.youtube.com/watch?v=2tVs7_H6SXY

 

[xsivspd]

13.16

All I can say is... that was so like 3 years ago.
I did that time exactly with a lower 60' on a non-built motor, factory turbo, lower PSI, and mods said below.
Take a look at :
http://youtube.com/watch?v=Obw2xrrTDxU

 

[SeR_Cyclops]

bump, i was wanting to know what is the time of the fastest msp? i didnt know if the list was updated cause i think ive heard of some faster than 12's

 

[avarela86]

Sweet...just found this thread. I just put up my runs from a day or so ago. Link it! Please...

 

[SeR_Cyclops]

where did you put up the vids? and i would like to know who has the fastest msp...

 

[blthlt]

All I can say is... that was so like 3 years ago.
I did that time exactly with a lower 60' on a non-built motor, factory turbo, lower PSI, and mods said below.
Take a look at :
http://youtube.com/watch?v=Obw2xrrTDxU

Well touch you. It's also about 100 degrees the day I ran. I see you have steelies on too, that helps. That isnt the fastest my car can run, it's just what it ran then. I could easily up the boost, put on slicks, or run some race fuel and 20 psi and easily be in the low 12's or high 11's.

 

[MSP2003.5_Nick]

14.02

14.02 with 9 psi, slicks, side bolted exhaust, FMIC w/ Hard pipes

 

[onequickmsp]

I ran a 14.712 at Toronto Motorsports Park during the "Meeting of the Mazdas event (MotM). I run with a CustomMSP SMIC, Turbohoses Hardpipes, Forge BOV, Injen CAI, Greddy SP2, and Unichip @ 12psi.

Here is a link to my timeslip: http://i96.photobucket.com/albums/l185/onequickmsp/MOM%2007/timeslip.jpg

Here is a link to pictures: http://www.toprotege.com/forums/showthread.php?t=34670&highlight=MotM

Thanks.

 

[MsP155]

HA thats it i ran a 5 sec!!! take that!!! LMAO

 

[xsivspd]

Then why post your video in the 1/4 mile Bragging Rights section?
Obviously this IS your fastest run, and you have nothing but a 'BLOWN Forged motor' to prove it - as per your sig.
You have to love a guy that puts so many BUTS into the equation to account why or how he could have done better.

Well touch you. It's also about 100 degrees the day I ran. I see you have steelies on too, that helps. That isnt the fastest my car can run, it's just what it ran then. I could easily up the boost, put on slicks, or run some race fuel and 20 psi and easily be in the low 12's or high 11's.

 

[low_psi]

First pass in 5 years!

60'... 2.188
330... 6.035
1/8... 9.184
MPH... 79.11
1000... 11.900
1/4... 14.200
MPH... 98.41

TBE w/ cat, FMIC, K&N panel, AFC, 9psi<!--IBF.ATTACHMENT_1351789-->

 

[CnoTataymo]

First pass in 5 years!

60'... 2.188
330... 6.035
1/8... 9.184
MPH... 79.11
1000... 11.900
1/4... 14.200
MPH... 98.41

TBE w/ cat, FMIC, K&N panel, 9psi<!--IBF.ATTACHMENT_1351789-->

Nice run. Don't you have a Unichip also?

 

[low_psi]

whoops, added the AFC to my mod list. I sold the Unichip and picked up a v1 AFC a little over a year ago. Car always ran very well with the UC, but I wanted something I could tweak.