downpipe install

[hotcornernoprob]

will a muffler shop install a downpipe on a 06 MS6? or do i have to go to a speedshop? i'm looking at purchasing the CPE catless DP. thanks for any info.

 

[1QuickMS6]

All you have to do is call. The worst they can say is no.

 

[zoom-zoomhatch]

Or the install yourself can't be that hard.

 

[freekwonder]

depends on the shop. Technically its a Federal Law that you have to have a cat, so it technically would be illegal for them to remove it. But some shops will work around that if you know somebody or some of the friends.

 

[ssinstaller]

will a muffler shop install a downpipe on a 06 MS6? or do i have to go to a speedshop? i'm looking at purchasing the CPE catless DP. thanks for any info.

I wouldn't trust an average muffler shop mechanic to install the DP, it is a very involved install. You would be better off haveing a reputable speed shop do the install. If you have the tools and access to a lift you could do it yourself, I installed my CP-E DP by myself in about 5 hours.

 

[Redlinez]

Wow, that's more of a job than I thought. Did you ever dyno before or after? I consider myself fairly adept at auto mods, did quite a bit of work on my LS1 Z28's. Did you have a lift and airtools?

 

[ssinstaller]

Wow, that's more of a job than I thought. Did you ever dyno before or after? I consider myself fairly adept at auto mods, did quite a bit of work on my LS1 Z28's. Did you have a lift and airtools?

I used a lift, but no air tools, there really isn't room to use air tools. No dyno though, the closest AWD dyno is 5.5 hours away.

 

[Black_Protege_5]

Well it's not really an easy job with having the turbo in the back against the firewall. I still don't get why they even do that.

 

[bazooka joe]

Well it's not really an easy job with having the turbo in the back against the firewall. I still don't get why they even do that.

isn't that where the mani is?

 

[Black_Protege_5]

well the ms6 motor is the opposite of the P5. The intake mani is in the front and the exhaust is in the rear. So it makes it a pain to work on.