Delphi 525lb Injectors

whoa, you're running mustang injectors? they're mad tall, how'd you get them to fit? I can get some 550cc's really cheap if they'll fit. might you post up some pics?
Thanks.
-Mateo
 
yellerandahalf said:
whoa, you're running mustang injectors? they're mad tall, how'd you get them to fit? I can get some 550cc's really cheap if they'll fit. might you post up some pics?
Thanks.
-Mateo

We use the same green top mustang injectors. A little modification plus 4 spacers will do the job.
 
alrighty. might you sell me the spacers? Cause I have 550's readily available. Might you also provide some more detail about the modifications needed? (other than the plug)
Thanks Juan!
-Mateo
 
yellerandahalf said:
jah, that was a bit intriguing... i had to check it out. they're 50lb.
-Mateo

You need to do a little machining on the top and depending on the injectors the bottom has to be the same size as the stock injectors or you can get an o-ring to make them fit. Plus the spacers.
 
HiBoost TS said:
You need to do a little machining on the top and depending on the injectors the bottom has to be the same size as the stock injectors or you can get an o-ring to make them fit. Plus the spacers.

Cool. If I sent you the injectors, could you take care of this and send me the o-rings and spacers I need?
-Mateo
 
Back