decalfx fog light film overlays on my 2010 MS3

[DarkSpeed3]

Check it... took about 5 mins. Just cleaned the bug guts off the fogs and stuck on these overlays.

I like em... Also just ordered yellow bulbs for my front turn signals to match the fogs. I'll take more pics once I put the yellow bulbs in the turn signals.

 

[DarkSpeed3]

Updates:

 

[importgirl212]

Is there a way to get the fog light bezel off without taking off the bumper?

 

[Sleezer1533]

Hey ive been thinki9ng of buying these overlays in smoke for my head and tail lights, what did you think of the quality etc?

 

[DarkSpeed3]

Is there a way to get the fog light bezel off without taking off the bumper?

Yes on the speed3 they pull right out by hand

 

[DarkSpeed3]

Hey ive been thinki9ng of buying these overlays in smoke for my head and tail lights, what did you think of the quality etc?

Use the uncut sheets so you have some edges to hold onto when you pull the film to stretch it around the contours. The quality is great.

 

[Kingof3rdinput]

What bulbs did you order to match? I'm looking at a similar setup.

 

[importgirl212]

So I can just pull them off on the front?

 

[DarkSpeed3]

So I can just pull them off on the front?

Assuming you have the speed3 yes. It takes a strong set of hands but they pull straight out. I found it easiest to pull the bottom first

 

[DarkSpeed3]

What bulbs did you order to match? I'm looking at a similar setup.

I used VEROX brand 7443

 

[importgirl212]

Assuming you have the speed3 yes. It takes a strong set of hands but they pull straight out. I found it easiest to pull the bottom first

Yeah, 2010 Speed3.
Thanks DS3.

 

[DarkSpeed3]

Yeah, 2010 Speed3.
Thanks DS3.

Youre welcome (cabpatch)

 

[shingojr]

i wonder how's will it come out if i put a 3000k HID as fog with overlay...will it be come out to be light yellow? anyone has this setup?

 

[DarkSpeed3]

i wonder how's will it come out if i put a 3000k HID as fog with overlay...will it be come out to be light yellow? anyone has this setup?

You wont need yellow bulbs with this film, the light output is as yellow as yellow gets.

 

[wingzero_]

Do they have them for the regular 2010 Mazda 3?

 

[DarkSpeed3]

Its a universal film. I applied a square piece and trimmed the scrap around the edges. Took like 2 mins per light.

 

[wingzero_]

Oh, right on. I was thinking it was a kit specific for your car.

 

[DarkSpeed3]

There are pre-cuts for a ton of cars but the 2010 is not avail yet.

 

[0HTEN3SIX7ONE]

i saw your video on blacking out the head lights
but my question is what bout the tail lights?
or do you know how to take them off?