CX-5 Photos - Share your shots with us!
- Thread starter inodes
- Start date
Chris_Top_Her
Contributor
- :
- San Antonio, Texas
- :
- '15 CX-5 Miata AWD
Boss
Chris_Top_Her
Contributor
- :
- San Antonio, Texas
- :
- '15 CX-5 Miata AWD
Yes. It's a Danish guy in the CX-5 club face book page.
Loaded up I imagine that is close to the EU towing limits. I personally wouldn't feel comfortable towing a trailer of that size with my CX-5. Towing my 14" boat in the wind is noticeable... I can only imagine the white knuckle drive even at 35MPH with that behind you.
Boss
I wish we could have the diesel over here in the states. With the whole VW diesel-gate incident, I don't think that will be happening anytime soon.
Like the setup alot. Was thinking about that type of blue before I went with my color scheme. Are you lowered?Here is my current setup - great for hauling bikes and scooting around.
**********************************
Sent from my XT1254 using Tapatalk
Thanks for the kind words. I was lowered on H&R's but wanted a bigger drop so installed some Corksport springs - current ride height as seen in the photo.
Here is my current setup - great for hauling bikes and scooting around.
**********************************
Mind if I suggest something? Well 2 things now since I saw something else since starting this post.
Have you considered removing the plasti-dip from the inside the mazda logo? You can remove it without removing it off the emblem with a toothpick. Once it starts to lift up a piece, you just pull on it.
The other was also plasti-dipping or removing the skyactiv emblem for consistancy. You removed the CX-5 part, so clean on both sides would work, you blacked out the mazda logo, so black for both would work. I know it isnt my car and its your style that matters, so just a suggestion, take it or leave it.
Here it is with the center of the mazda logo removed of plasti-dip and the skyactive plasti-dipped in the same color as your car
Mind if I suggest something? Well 2 things now since I saw something else since starting this post.
Have you considered removing the plasti-dip from the inside the mazda logo? You can remove it without removing it off the emblem with a toothpick. Once it starts to lift up a piece, you just pull on it.
The other was also plasti-dipping or removing the skyactiv emblem for consistancy. You removed the CX-5 part, so clean on both sides would work, you blacked out the mazda logo, so black for both would work. I know it isnt my car and its your style that matters, so just a suggestion, take it or leave it.
Here it is with the center of the mazda logo removed of plasti-dip and the skyactive plasti-dipped in the same color as your car
Appreciate the suggestions!
There isn't Plasti-Dip inside the Mazda logo - I had laid down a little carbon fiber vinyl so it peeks through the blacked out emblem. Hard to see in the photo - sorry!
I was going to remove the Skyactiv emblem, but I kinda liked it there as it represents the philosophy of the brand. Thought about blacking it out too, but the letters are inset and black so it would make it a little more obscure. So I just left it as is. Might change my mind and black it out and go with a contrast color on the lettering in the future, but we'll see.
Thanks again for the feedback!
**********************************
Here is my current setup - great for hauling bikes and scooting around.
**********************************
Dig the color combo!
**********************************
New shoes for new adventures!
**********************************
I like the adventure semi-rugged look of the tires/wheels.
Chris_Top_Her
Contributor
- :
- San Antonio, Texas
- :
- '15 CX-5 Miata AWD
New shoes for new adventures!
**********************************
Cool pic. Are you on the cx5 club USA Facebook page? We are looking for a new cover photo, and yours would be a good entry.
