CX-5 Electronic Parking Brake torque specs?

[Gold Star]

I am replacing the rear caliper and am taking off the Electronic parking motor on the rear brakes. Does anyone know the torque specs for these 2 bolts that attach to the caliper to mount the EPB motor..?

 

[Mazdiod2]

Click on "resources" and see if you can find it in the CX-5 manual, page 2.

 

[Gold Star]

Click on "resources" and see if you can find it in the CX-5 manual, page 2.

I talked to a technician at the Mazda dealership and he said the torque specs are 12 lbs for the 2 mounting bolts that hold the EPB motor onto the calliper itself.

 

[yrwei52]

I talked to a technician at the Mazda dealership and he said the torque specs are 12 lbs for the 2 mounting bolts that hold the EPB motor onto the calliper itself.

 

[Gold Star]

Thanks everyone for advice and assistance on doing maintenance on my Mazda CX5 it's good to see others willing to share their knowledge to help another person out when doing your own maintenance. This is a great group to be part of thanks again.

 

[Gold Star]

Click on "resources" and see if you can find it in the CX-5 manual, page 2.

I will definitely keep that in mind for future repairs. Thanks again

 

[Gold Star]

Click on "resources" and see if you can find it in the CX-5 manual, page 2.

Thannks will definitely check it out

 

[CoxHazards]

I am about to embark on rear caliper and EPB motor replacement as well on my '18 because the calipers are shot as previous owner did not put the car in maintenance mode and I've got parking brake malfunction and can't take it out of service mode.

Question for you, does rear caliper replacement require a bidirectional scan tool in order to reset the EPB position and take it out of service mode?

 

[Gold Star]

I am about to embark on rear caliper and EPB motor replacement as well on my '18 because the calipers are shot as previous owner did not put the car in maintenance mode and I've got parking brake malfunction and can't take it out of service mode.

Question for you, does rear caliper replacement require a bidirectional scan tool in order to reset the EPB position and take it out of service mode?

Look on youtube there are many videos showing how to put it in the service mode before you start working on the brakes same as how to put it back in regular mode not a difficult job just take your time doing it.