cobb RSB location

[djza2u1]

For those who have one, where ae your bushings located. Mine is at the highest setting. I am hearing a noise when i drop the clutch, almost like a kick back.

 

[Kain]

For those who have one, where ae your bushings located. Mine is at the highest setting.

What.

 

[GoFast]

mine are in the back

 

[djza2u1]

ok so you have 4 connections or the rear, 2 for the end links and 2 with bushings, the holes are slotted for adjustment on the last 2. I am asking what they are set at, HIGH so the bar is closser t the car, or low so the bar is closer to the ground

 

[GoFast]

the end holes are full stiff and the inside holes are less stiff. for street i would run less stiff, especially in chicago winters

 

[djza2u1]

This is the bracket that im talking about.

 

[DaleNixon]

Just make sure those bolts your picture is pointing at are tight. Mine made awful sounds until I got under there and realized i had loose bolts on one side. I just did a pull up on the swaybar to get it all the way down and tightened everything up :thumb:

 

[djza2u1]

Just make sure those bolts your picture is pointing at are tight. Mine made awful sounds until I got under there and realized i had loose bolts on one side. I just did a pull up on the swaybar to get it all the way down and tightened everything up :thumb:

Thanks. That is what i was looking for.