Bushings

[pat_neumerz]

My rear swaybar bushings are more then shot. Where can I buy the correct replacements for a lowish cost?

 

[bluemp301]

I bought some energy suspension bushings through summit. I believe it was about $40 for both front and rear sets.

 

[pat_neumerz]

I searched summit and found these http://www.summitracing.com/parts/ENS-4-5141R/Application/?prefilter=0 but that is only front. I need the rear.

 

[Tzar177]

this should be what you need http://www.summitracing.com/parts/ENS-9-5107R/

 

[pat_neumerz]

Thank you so much. I have another problem when I turn my car on it squeals super loud. When I hit the gas it gets extra loud squealing and then stops. I think it is the alternators belt. Any other guesses?

 

[Tzar177]

Sounds most likely that its one of the belts. How many miles are on the car? Have belts been replaced any time recently? Have you checked the condition of the belts?

 

[pat_neumerz]

Their a little worn on the sides. The car has 155k so its belt most likely have to be replaced regardless and they will be.

 

[pat_neumerz]

Would this work? http://www.jegs.com/i/Gates/465/K050405/10002/-1

 

[Tzar177]

Would this work? http://www.jegs.com/i/Gates/465/K050405/10002/-1

Looks like it should. You need one 5 rib and one 4 rib belt. Were you lookin for a specific brand of belt? Is there an auto parts store close to you?

 

[pat_neumerz]

I was hoping to just get one that works from an auto store near me. Brand does not matter in the least.

 

[Tzar177]

Yea just tell em what car you have and they should have them stocked. Which one are you gonna replace?

 

[jonridinhi]

this should be what you need http://www.summitracing.com/parts/ENS-9-5107R/

Are those grease-able? It says no to the frame but nothing about the sway bar journal. Report please.....

If not i am looking for the energy sup. ones that are. (ughdance)

 

[Tzar177]

Are those grease-able? It says no to the frame but nothing about the sway bar journal. Report please.....

If not i am looking for the energy sup. ones that are. (ughdance)

If you have stock bar, then you need these http://www.summitracing.com/parts/ENS-9-5157R/ thats what I use with the AXR anti-klunk kit

 

[pat_neumerz]

Ok lots to say here haha. Replaced both belts today. Took about three hours everything went well. Test driving a little bit I stopped at a stop sign and guess what. Squeal. While it is no doubt greatttttlyyyy reduced, we still have a squeal. Help.
Also the bushings so i have the standard issue racingheart swaybar what bushing are the replacement?? I am very very very^10 confused.

 

[Tzar177]

Ok lots to say here haha. Replaced both belts today. Took about three hours everything went well. Test driving a little bit I stopped at a stop sign and guess what. Squeal. While it is no doubt greatttttlyyyy reduced, we still have a squeal. Help.
Also the bushings so i have the standard issue racingheart swaybar what bushing are the replacement?? I am very very very^10 confused.

You may need to tighten the belts just a tad more. Its actually racingbeat, not racingheart....those are the wheels. If you have stock swaybar parts, then you actually will need these http://www.awrracing.com/store/product_info.php?products_id=253

 

[pat_neumerz]

good call haha. I feel like an idiot lol. Whats the difference between the greasable and non greaseable.(well beside the obvious)

 

[jonridinhi]

You may need to tighten the belts just a tad more. Its actually racingbeat, not racingheart....those are the wheels. If you have stock swaybar parts, then you actually will need these http://www.awrracing.com/store/product_info.php?products_id=253

Racing HART

Ok stock is a 20mm dia so dose the awr kit run the 20.5 or these @ 20 mm?

http://www.summitracing.com/parts/ENS-5-5106R/

 

[ucMP3]

Racing HART

Ok stock is a 20mm dia so dose the awr kit run the 20.5 or these @ 20 mm?

http://www.summitracing.com/parts/ENS-5-5106R/

Ya, use those. I use those bushings in the oem bracket, personally.

 

[bluemp301]

Here's the exact part #s for the energy suspension bushings I ordered from summit to help clarify what you need. Note the energy suspension bushings will be a little bit beefier than the stock ones but I still got the back ones on just fine and I reused the stock bracket.

ENS-9-5161R
ENS-9-5157R

 

[jonridinhi]

I am looking for the grease able ones....