burning through tires

aaronsewell

Member
:
MAzda Speed6
I seem to be burning through the sides of my tires at a almost rediculious rate. Its like a set of tires every year or twice a year.
 
get spc adjustable ball joints and then get an alignment.

or get some better tires, the stock ones don't last long at all.
 
Have you had an alignment recently?

Where are your tires wearing, exactly? If you're getting too much wear on the outside, you need to have to toe adjusted.

Like Bova stated, SPC adjustable balljoints will help with wear, and they'll also improve handling a little.
 
That's just wrong. Im lowered and I have had a set of Pzero Nero's that have been on for 26000 miles and just maaaayybe now are starting to show some signs of wear!
 
Are you guys talking about the front now, or still the same old back tire issue. I thought it was the Camber and not the Toe.
 
Are you wearing out the inside or outside edges? SPC ball joints and a proper custom alignment (not just to Mazda spec which is too loose) made a HUGE improvement in my front tire wear.
 
you definitely need an alignment man. im dumped like 4 inch's on larger sway bars, and my stock tires lasted till 60k miles. and im now just on my 2nd set of tires at 76k miles.
 
Since where on this subject questions for you guys how to fix the camber on the rears. Dropped on Eibachs Sport Lines front using the SPC ball joints.
 

New Threads and Articles

Back