Black Lug Nuts

[khaosman]

Dust cap you say eh? anyways where did you get your wheels from and how much did u get them for?

Yea the dust cap on our car's axle, to protect the wheel bearings. What happens is the wheel won't sit perfectly flush due to the dust cap slightly pressing on the center hole, and in my case caused the wheel to look like it is wobbling (bad news). Like I said, wheel spacers, dremel, or a hammer will fix it. You might get lucky it won't be a problem either.

I got my Rota Slipstreams from vividracing... I had to wait quite a while for them and paid a good bit more than most other sites (over $500). But they were the only place that could get the 15x7 size I wanted for autocrossing. When I get some new summer cruising wheels, probably 16x7 Slipstreams, I'm going to get them from jlbmotorsports since they are the cheapest and I know I wouldn't have to wait.

 

[69RMSP]

thx so much!

Yea the dust cap on our car's axle, to protect the wheel bearings. What happens is the wheel won't sit perfectly flush due to the dust cap slightly pressing on the center hole, and in my case caused the wheel to look like it is wobbling (bad news). Like I said, wheel spacers, dremel, or a hammer will fix it. You might get lucky it won't be a problem either.

I got my Rota Slipstreams from vividracing... I had to wait quite a while for them and paid a good bit more than most other sites (over $500). But they were the only place that could get the 15x7 size I wanted for autocrossing. When I get some new summer cruising wheels, probably 16x7 Slipstreams, I'm going to get them from jlbmotorsports since they are the cheapest and I know I wouldn't have to wait.

 

[MSP#735]

Gorilla, Bull Lock, Muteki or McGaurd?
&
Open end or closed end?

 

[02kllrb]

i've got a P5, do i need 1.5 or 1.25???

 

[MSP#735]

1.5.....everyone who is running the muteki lugs, what locking lugs are you using IF any?

 

[jon2000]

1.5.....everyone who is running the muteki lugs, what locking lugs are you using IF any?

Bull Locks ...see my post at top of this page

Jon

 

[kudakev615]

web site is sold out

 

[jester1x]

I bought some from Amazon.com if you can believe it. I thought I got a good deal. Here is the link: https://www.amazon.com/dp/ (commissions earned).

 

[MSP#735]

Just ordered mine, $31 shipped!
http://www.jlbmotorsports.com/rims/muteki-list.html

 

[Robot Romeo]

I just got my black Gorilla Lug Nuts in the mail today:

They didn't come in a box or any type of packaging, just in a USPS envelope. But they say Gorilla on each nut and the key. So $30 is a great deal.

 

[MSP#735]

NICE! from where did you order?

I just got my black Gorilla Lug Nuts in the mail today:

They didn't come in a box or any type of packaging, just in a USPS envelope. But they say Gorilla on each nut and the key. So $30 is a great deal.

 

[Robot Romeo]

From JBL Motorsports, Khaosman recommend them. I ordered them on 8/21 and got them on 8/25 after the Paypal check cleared. Only $31.

http://www.jlbmotorsports.com/rims/rota-list.html#JMAG

 

[MSP#735]

waiting for install pics!

 

[Robot Romeo]

My Hyper Black Enkei RPM2 wheels on special order from Discount Tire. As soon as I get them I'll post pics.

 

[MSP#735]

i need another place to order from....they wont deliver to my shipping address which is different from my billing address (my parents house) ARG!

 

[Run for Cover]

yep, just ordered me some red ones.. hope they fit.. 1.5 closed ends.. right

 

[Robot Romeo]

Right. (thumb)

 

[MSP#735]

here are mine....