Just about, there are a few more rings available in the front and rear but I like it like this as I amstill able to go to allthe places I usually go without scrubbing the front even with the car loaded. My garage at work is sub terrain with a steep ramp so I was initally worried about that. Its at a good height now and looks even lower when its rolling
BC Coilovers, Hotchkis Sways and MS Camkit Kit installed
- Thread starter SHAGwagn
- Start date
Just about, there are a few more rings available in the front and rear but I like it like this as I amstill able to go to allthe places I usually go without scrubbing the front even with the car loaded. My garage at work is sub terrain with a steep ramp so I was initally worried about that. Its at a good height now and looks even lower when its rolling
IMPORTIMAGE
Member
- :
- 427 built ls7 vette, clk 500, jaguar...
wow, car looks great!
IMPORTIMAGE
Member
- :
- 427 built ls7 vette, clk 500, jaguar...
no camber plates= no saw needed
import image is correct, however if you get the plates yes you will be able to go back to stock. Its just a stupid little hat on the top of each tower that should not even have been there in the first place.
I highly recommend getting the plates. When i installed my coil overs i dropped them down to the height you see now and thought it was all dandy. After taking it off the stands and trying to drive I noticed that the rims where hitting the struts. A few simple turns of the camber plate allens straightened it out and got me on the road. I am not sure if this will be an issue with the non camber plated version but for some reason after dropping mine the wheels leaned wayyyyyy in.
Good Luck, I never wrote a review but i am still loving mine and would not change them.
I highly recommend getting the plates. When i installed my coil overs i dropped them down to the height you see now and thought it was all dandy. After taking it off the stands and trying to drive I noticed that the rims where hitting the struts. A few simple turns of the camber plate allens straightened it out and got me on the road. I am not sure if this will be an issue with the non camber plated version but for some reason after dropping mine the wheels leaned wayyyyyy in.
Good Luck, I never wrote a review but i am still loving mine and would not change them.
IMPORTIMAGE
Member
- :
- 427 built ls7 vette, clk 500, jaguar...
alex, let me send you a pm...
IMPORTIMAGE
Member
- :
- 427 built ls7 vette, clk 500, jaguar...
hello, its Thursday morning! We are open weekends! WE’VE GOT GIMMICK MOTORSPORTS TURBO INLETS BACK IN STOCK!!!! Mishimoto Radiator combos!! Import Image Racing NOW SELLS BLOUCH TURBOS!!! check out the site! available for most tuner vehicles, we are now a distributor and will not be beat! GIMMICK MOTORSPORTS Radiator hoses in stock!! Great combos added to the site, new deals on the front page! BC RACING PRICE INCREASE JULY 1st!!!! Get them before they go up! Major additions to the website over 450 parts in just May have been added! all subaru sections have more items, the entire bc racing line is available on our site now! tons of whiteline available for all subarus now on the site! ZENESIS ALARM SYSTEMS NOW CARRIED! 08 sti parts added to website! Check out our site for great combo deals! FIC injectors top feed added to the site for wrx/sti top feed! Always click the new products tab to see the latest additions on our site! We have special deals on our front page geared to the majority of our customers, click refresh on the homepage to see all the deals as there are too many to list at once! The 2008+ wrx Section is up and running! STRI gauges added to website. BC RACING evo 10 coilovers in stock now!!! Evo parts added as well as 02-07 wrx/04-07 sti, and Legacy GT exhaust section updated! Check out the new Subaru Turbochargers section! Some ENKEI WHEELS ADDED we have many more specials! great deals to be had! More turbo kits, Spec Twin plate clutches! more suby goodies added! look at our new front page for added special deals! we are now selling mazda performance parts as well! the gauge section at the bottom of our main page has the most amount of gauges, I'll work on adding them throughout all of the sections
www.importimageonline.com
239 540 6385 visa.mc
AIM= importimagerace
Email- Sales@importimageonline.com
paypal to whtezmbej@aol.com
Hours today are 10am to 10pm ET
Friday June 6th we will be taking a half day and leaving about 2pm, we will be able to answer pm's and voicemails at night and the entire weekend, thanks so much for selecting us!
if we miss your call leave a message if whether its after hours or on the weekends and we'll call you back asap! we are generally here weekdays from 10am to 10pm!
www.importimageonline.com
239 540 6385 visa.mc
AIM= importimagerace
Email- Sales@importimageonline.com
paypal to whtezmbej@aol.com
Hours today are 10am to 10pm ET
Friday June 6th we will be taking a half day and leaving about 2pm, we will be able to answer pm's and voicemails at night and the entire weekend, thanks so much for selecting us!
if we miss your call leave a message if whether its after hours or on the weekends and we'll call you back asap! we are generally here weekdays from 10am to 10pm!
Thanks SHAGwagn
I just placed my order for Teins this morning and called back to change my order after reading this thread, and I got a better deal by doing it. For $20 less than what I was going to pay for just the Teins, I got the BC coilovers, front camber plates, and SPC rear camber arms.
Your pics are what really sold me. That's the exact drop I'm looking for. I might even get them for the 5, but my wife would probably kick my ass. If she like the ride quality in my car, she might be sold. We'll see.
I just placed my order for Teins this morning and called back to change my order after reading this thread, and I got a better deal by doing it. For $20 less than what I was going to pay for just the Teins, I got the BC coilovers, front camber plates, and SPC rear camber arms.
Your pics are what really sold me. That's the exact drop I'm looking for. I might even get them for the 5, but my wife would probably kick my ass. If she like the ride quality in my car, she might be sold. We'll see.
Last edited:
The teins u were lookin at, are those MS3 specific?udontknowjack
Member
- :
- mazda mazdaspeed3
so what u end up with in the front camber alignment?
He probably meant since installing the front camber plates, what adjustments have you done to them? I'm not sure but that's what I understood.
I got my BC coilovers not too long ago and installed them myself. They're awesome! I didn't make any adjustments to the front camber plates. I left them at the stock setting. I didn't even install the rear camber arms. I was too tired after finishing the whole install. I'll do it eventually and get an alignment, but it rides fine. It doesn't pull to either side. Whenever I get my wheels, I'll make the nessessary camber adjustments.
I got my BC coilovers not too long ago and installed them myself. They're awesome! I didn't make any adjustments to the front camber plates. I left them at the stock setting. I didn't even install the rear camber arms. I was too tired after finishing the whole install. I'll do it eventually and get an alignment, but it rides fine. It doesn't pull to either side. Whenever I get my wheels, I'll make the nessessary camber adjustments.
Last edited:
udontknowjack
Member
- :
- mazda mazdaspeed3
did u ever got the alignment done? whats your front camber with those bc coilover
udontknowjack
Member
- :
- mazda mazdaspeed3
wait a min....thats not max - camber right? with the bc coilover and front camber plates....is it possible to get -2 camber??
