A'pexi turbo timer

[Orangespeed_03]

Does any one have a " how to do " install on a a'pexi turbo timer on MSP ???

 

[SoniCraze]

i have mine installed, it was kinda a pain, but really easy. PM me and ill give you my number, then call me sometime 2morrow and ill tell you what wires to splice into.

 

[Orangespeed_03]

Can you give me a little right up cause i live in Canada and the long distance charge would be (notcool)

 

[tekkie]

this should help you out

http://members.tripod.com/church56/blitz.html

http://www.msprotege.com/forum/showthread.php?t=65245

 

[Orangespeed_03]

Thank you so much that is a huge help ..But i still need to know what wires from the turbo timer go to the three wires you pointed out i'm using a Apexi turbo timer and the instructions say that one (Red) is 12v constant , (Blue) is Ig2 out put , and (Green) is Ig1 out put.... Where do those three wires go RED = constant 12 ,BLUE = Ignition Start 12V , BLACK/WHITE = Accessory 12V If you could clear this up it would help me so much Thanxs Angela

 

[tekkie]

Orange look at the first link, the blitz turbo timer is exactly the same and shows where all the hook ups are.

 

[freekwonder]

ya the blitz TT install is basically the same, but since i have an apex TT installed i can just tell you that the wires, this is if you had the wiring harness pointed away from you and you are looking at the wires. are red from TT = Top left Red, Green from TT = Top Blue wire , Blue from TT = black/white

also if you dont hook up the a/f you wont be able to use the automatic mode (battle mode, what ever you want to call it) i think its like pin 68 (pink wire) for the positive side, and pin 7? something for the ground its a black ground wire. do a search for the wire diagrams and check out linux racers thread in the how to section on hooking up the a/f

 

[Orangespeed_03]

Thanks everyone it is all up and running it works great!!