Whats up everyone? I heard some rumors that people were having problems with alot of the FS-ZE parts (cams, intake manifold, pistons, etc). From what I've heard alot of fuel problems have popped up with these parts leaning out the motor. Anyone else had, heard of, or have any input on this??? Im wanting to do some FS-ZE parts, but need to know before I start planning out my attack.
Anyone w/ FS-ZE parts???
- Thread starter infrared5
- Start date
actually while were on the subject, has anyone had any problems with any parts???
I have the ground control coilovers and because they have a smaller diameter spring they sit funny on the strut causing a squeaky noise, i usually lube them with a little grease, but im gonna see if i can have a custom spring perch welded onto the body of the strut.
I have the ground control coilovers and because they have a smaller diameter spring they sit funny on the strut causing a squeaky noise, i usually lube them with a little grease, but im gonna see if i can have a custom spring perch welded onto the body of the strut.
- :
- 92 & 16 Meyatas
my eibachs/lowering caused my stock sway bar end link to break. i got the 21mm awr bar with adjust end links...no problems running them for over a year! i like that sway bar too! other than that no real issue with any aftermarket products, excect of course those lousy aftermarket bubls! i think i tried them all. running sylvania silver stars now, excellent. got piaa ion's in the fogs, they're great!!
upsman.
he has all the parts, he did a fs-ze engine swap =D
you can find him on cardomain..and he infrequently pops up here.
he has all the parts, he did a fs-ze engine swap =D
you can find him on cardomain..and he infrequently pops up here.
