- :
- 03' Mazda Protege 5
EVERYTHING SOLD. MODERATORS FEEL FREE TO TRASH THIS THREAD
SOLD ITEMS:
Injen intake-Lukie91985-SHIPPED
Dave B gauge rings-ScratchNSniff-SHIPPED
Progress rear sway bar-Pro5x2-SHIPPED
Corksport gauge faces-Circuit-SHIPPED
Brembo rotors, gauge bezel-DanthemanTO-SHIPPED
Sport 20 gauge pod-Oldham_Racing-SHIPPED
TWM shifter-Aaronlux-SHIPPED
Racing Beat axleback-Raven Hawk-SHIPPED
SU engine mount-SOLD ON EBAY-SHIPPED
Autometer gauges-SOLD ON EBAY
SOLD ITEM DESCRIPTIONS:
Injen cold air intake for any 3rd gen 2.0L protege. It is in great condition. The filter that comes with it is a little old but it still has some life left on it. New these will cost you $240. SOLD TO Lukie91985
Dave B brushed aluminum gauge rings for any 3rd gen protege. In perfect condition. SOLD TO ScratchNSniff
First item up is my Progress 22mm rear sway bar. It is in perfect condition and comes with bushings and brackets. It should fit and 3rd gen protege(not sure on that though), it will for sure fit any Protege 5. I bought this new and still has lots of life left on it. SOLD TO Pro5x2
Corksport reverse glow gauge faces for any 3rd gen protege. These are very rare now and Corksport does not even sell them anymore. They are the best looking gauge faces you can get for the protege and the only one with the mazdaspeed symbol on them. They are in perfect working and cosmetic condition. Comes with all the wiring and switch's needed to install. Has a dimmer knob as well as a switch that turns the color from a vibrant blue to a greenish blue. SOLD TO Circuit
Chrome gauge bezel for any 3rd gen protege. In perfect condition. SOLD TO DanthemanTO
Brembo rear cross drilled rotors for P5's. Might fit other 5 lug protege's but not sure. I just got these from a member here but never installed them. As you can see some of the paint is chipping off but it is zink plated underneath. Just clean up a little bit and they are good as new. New these go for $200+shipping. SOLD TO DanthemanTO
Sport20 dual single din gauge pod for any 3rd gen protege. This was custom made by sport20 and very hard to find. In perfect condition. SOLD TO Oldham_Racing
TWM short through shifter for any 3rd gen manual protege. In perfect condition. Comes with all hardware needed to install except the bolts for the heat shield spacers which can easily be bought at any hardware store. SOLD TO Aaronlux
Racing Beat axle back exhaust from a Mazdaspeed Protege. It has been modified to fit a Protege 5 which just involves shortening the tip. So this would be great for all P5's. It of coarse will still fit any 3rd gen protege sedan but you will need to lengthen the tip for it to line up with your bumper. It is in great condition, best exhaust I ever had. SOLD TO Raven Hawk
SU front engine mount. In great condition, still has lots of life left on it. Great mod to increase exceleration time. New these go for $100+shipping. SOLD ON EBAY
Autometer carbon fiber air/fuel gauge. In perfect condition. SOLD ON EBAY
Autometer carbon fiber voltmeter gauge. In perfect condtion. SOLD ON EBAY
SOLD ITEMS:
Injen intake-Lukie91985-SHIPPED
Dave B gauge rings-ScratchNSniff-SHIPPED
Progress rear sway bar-Pro5x2-SHIPPED
Corksport gauge faces-Circuit-SHIPPED
Brembo rotors, gauge bezel-DanthemanTO-SHIPPED
Sport 20 gauge pod-Oldham_Racing-SHIPPED
TWM shifter-Aaronlux-SHIPPED
Racing Beat axleback-Raven Hawk-SHIPPED
SU engine mount-SOLD ON EBAY-SHIPPED
Autometer gauges-SOLD ON EBAY
SOLD ITEM DESCRIPTIONS:
Injen cold air intake for any 3rd gen 2.0L protege. It is in great condition. The filter that comes with it is a little old but it still has some life left on it. New these will cost you $240. SOLD TO Lukie91985
Dave B brushed aluminum gauge rings for any 3rd gen protege. In perfect condition. SOLD TO ScratchNSniff
First item up is my Progress 22mm rear sway bar. It is in perfect condition and comes with bushings and brackets. It should fit and 3rd gen protege(not sure on that though), it will for sure fit any Protege 5. I bought this new and still has lots of life left on it. SOLD TO Pro5x2
Corksport reverse glow gauge faces for any 3rd gen protege. These are very rare now and Corksport does not even sell them anymore. They are the best looking gauge faces you can get for the protege and the only one with the mazdaspeed symbol on them. They are in perfect working and cosmetic condition. Comes with all the wiring and switch's needed to install. Has a dimmer knob as well as a switch that turns the color from a vibrant blue to a greenish blue. SOLD TO Circuit
Chrome gauge bezel for any 3rd gen protege. In perfect condition. SOLD TO DanthemanTO
Brembo rear cross drilled rotors for P5's. Might fit other 5 lug protege's but not sure. I just got these from a member here but never installed them. As you can see some of the paint is chipping off but it is zink plated underneath. Just clean up a little bit and they are good as new. New these go for $200+shipping. SOLD TO DanthemanTO
Sport20 dual single din gauge pod for any 3rd gen protege. This was custom made by sport20 and very hard to find. In perfect condition. SOLD TO Oldham_Racing
TWM short through shifter for any 3rd gen manual protege. In perfect condition. Comes with all hardware needed to install except the bolts for the heat shield spacers which can easily be bought at any hardware store. SOLD TO Aaronlux
Racing Beat axle back exhaust from a Mazdaspeed Protege. It has been modified to fit a Protege 5 which just involves shortening the tip. So this would be great for all P5's. It of coarse will still fit any 3rd gen protege sedan but you will need to lengthen the tip for it to line up with your bumper. It is in great condition, best exhaust I ever had. SOLD TO Raven Hawk
SU front engine mount. In great condition, still has lots of life left on it. Great mod to increase exceleration time. New these go for $100+shipping. SOLD ON EBAY
Autometer carbon fiber air/fuel gauge. In perfect condition. SOLD ON EBAY
Autometer carbon fiber voltmeter gauge. In perfect condtion. SOLD ON EBAY
Last edited:
