93 sohc to dohc

[jus10 msp]

how hard is it to swap a dohc into a sohc car. i know you need the engine , pcm ,and dist. i think you can use th sohc tranny but you would have to use sohc flywheel and clutch. let know planning on doing this project soon. need alittle help.

thanks justin h

 

[Salmon_Rob]

go to www.clubprotege.com and do a search on the engine swap, a LOT of people have done it, including the admin of that site. It is fairly straight forward. You can use the F series tranny, but it sux balls, so i would suggest switching over to the G series tranny You also need the wires for the VICS system, and the ECU etc. www.clubprotege.com has all of the resources you need though

 

[1stgensupercar]

if u use the g series tranny u will need to get the different tranny mounts and front motor mount bracket and u need to run a single wire from the fuel injection harness to the ecm in slot2-12 and have a new slave cylinder