505 V3 Billet Intake Manifold *GB*

By far the finest part to ever come out of the 505 lab, the new V3 Billet Intake Manifold is the worthy successor to the original 505 Sheet Metal Intake Manifold. Over 2 years and thousands of dollars were spent reimagining and refining this piece from the ground up. The end result is a nearly bomb-proof evolution of the manifold that has been run on over 40 high power Protege's all over the world.

This part is designed for maximum peak horsepower, and makes obscenely large gains across the board over the OEM Protege and 626 manifolds. If you want your FS engine to BREATHE, this is definitely the manifold you're looking for!



12469876_1200057090022050_971243621_o.jpg


IMAG0522.jpg


IMAG0520.jpg


IMAG0519.jpg


IMAG0558.jpg















The Details:

Based on the same optimized internal dimensions as the original, the new V3 design incorporates the following improvements:

- 100% billet components
- 7/8" longer effective runner length for improved mid-range gains
- 3D milled funnel taper from runner to head port
- Perfected injector geometry
- Perfected throttle cable geometry
- Machined fuel rail mounts
- Half-round plenum
- Runner & plenum materials that are over twice as thick as the original
- Remote mounted EGR setup (optional)
- ~5% peak horsepower gain over original (~15% over stock manifold)


Standard finish is bare media blasted to show off the beauty of the billet components.
EGR Kit includes remote mounting bracket, valve flange, in/out hoses, fittings, and hardware.



Pricing & Options:

V3 Manifold - $1199* + ship**
Remote Mounted EGR - $100***
JayRacing Thermal Spacer Kit - $75
JayRacing Fuel Rail - $200

* Flexible payment plans are available with a deposit of $700. Deposits are only refundable if something goes wrong on my end, but can be transferred to another interested buyer if you need to back out for whatever reason.

** Actual shipping cost from 87111 (UPS for USA and USPS for international) will be calculated before final payment is made.

*** All manifolds are made with a hookup port for the EGR Kit, so the kit can be added later if needed.



Current Status:

Machining done.
Welding done.
Glass bead blasting done.
Packaging done.

Estimated shipping dates:

June 10th for USA orders with no fuel rail.
June 11th for International orders with no fuel rail.
June 20th for all orders with fuel rails.



Batch 3 is officially all sold out and all parts have shipped. Thanks for another great GB folks!

#UsernameEGR KitFuel RailThermal SpacersStatus
1.HammoYesSHIPPED
2.Marmas01SHIPPED
3.ZealoustheEnderYesSHIPPED
4.googoo1ooYesSHIPPED
5.Clement_ghostSHIPPED
6.paniaguae640YesYesSHIPPED
7.MSProtege(918)YesYesSHIPPED
8.greenspeedSHIPPED
9.destinealYesSHIPPED
10.mazdaastina1999SHIPPED
11.AnonymousYesYesYesSHIPPED
12.AnonymousYesSHIPPED
13.Turboj1YesSHIPPED
14.bwaltSHIPPED
15.jessemac19SHIPPED
16.NemosMP5YesSHIPPED
[tr]
 
Last edited:
1. Hammo - Blasted - EGR No - JR Fuel Rail *DEPOSIT PAID*
2. mazdaastina1999 - Blasted - EGR No
3. paniaguae640 - Blasted - EGR Yes - JR Fuel Rail
4. Marmas01 - Blasted - EGR No *DEPOSIT PAID*
5. Turboj1 - (TBD)
6. younggredd -
7. googoo1oo - Blasted - EGR Yes *DEPOSIT PAID*
8. ZealoustheEnder - EGR Yes *PART DEPOSIT PAID*
9. clement_ghost - Blasted - EGR No
10.
 
1. Hammo - Blasted - EGR No - JR Fuel Rail *DEPOSIT PAID*
2. mazdaastina1999 - Blasted - EGR No
3. paniaguae640 - Blasted - EGR Yes - JR Fuel Rail
4. Marmas01 - Blasted - EGR No *DEPOSIT PAID*
5. Turboj1 - (TBD)
6. younggredd -
7. googoo1oo - Blasted - EGR Yes *DEPOSIT PAID*
8. ZealoustheEnder - Blasted - EGR Yes *PART DEPOSIT PAID*
9. clement_ghost - Blasted - EGR No
10. MSProtege(918) - Blasted - EGR Yes - JR Fuel Rail
11.
12.
13.
14.
15.
 
Last edited:
1. Hammo - Blasted - EGR No - JR Fuel Rail *DEPOSIT PAID*
2. mazdaastina1999 - Blasted - EGR No
3. paniaguae640 - Blasted - EGR Yes - JR Fuel Rail
4. Marmas01 - Blasted - EGR No *DEPOSIT PAID*
5. Turboj1 - (TBD)
6. younggredd -
7. googoo1oo - Blasted - EGR Yes *DEPOSIT PAID*
8. ZealoustheEnder - Blasted - EGR Yes *PART DEPOSIT PAID*
9. clement_ghost - Blasted - EGR No *DEPOSIT PAID*
10. MSProtege(918) - Blasted - EGR Yes - JR Fuel Rail
11.
12.
13.
14.
15.
 
Last edited:
1. Hammo - Blasted - EGR No - JR Fuel Rail *DEPOSIT PAID*
2. mazdaastina1999 - Blasted - EGR No
3. paniaguae640 - Blasted - EGR Yes - JR Fuel Rail
4. Marmas01 - Blasted - EGR No *DEPOSIT PAID*
5. Turboj1 - (TBD)
6. younggredd -
7. googoo1oo - Blasted - EGR Yes *DEPOSIT PAID*
8. ZealoustheEnder - Blasted - EGR Yes *PART DEPOSIT PAID*
9. clement_ghost - Blasted - EGR No *DEPOSIT PAID*
10. MSProtege(918) - Blasted - EGR Yes - JR Fuel Rail
11. destineal - Blasted - EGR Yes
12.
13.
14.
15.
 
I just sent out PM's to everybody that has expressed interest via PM and everybody that is on the list that hasn't gotten a deposit in yet.

The GB signup period is officially closing tomorrow (Wednesday at 10pm MST), so we can get a 100% accurate headcount for ordering material.

If anybody is still on the fence, now is the time to shoot me a PM to chat before the spots are all locked up.
 
1. Hammo - Blasted - EGR No - JR Fuel Rail *DEPOSIT PAID*
2. mazdaastina1999 - Blasted - EGR No
3. paniaguae640 - Blasted - EGR Yes - JR Fuel Rail
4. Marmas01 - Blasted - EGR No *DEPOSIT PAID*
5. Turboj1 - No EGR - JR Fuel rail
6. younggredd -
7. googoo1oo - Blasted - EGR Yes *DEPOSIT PAID*
8. ZealoustheEnder - Blasted - EGR Yes *PART DEPOSIT PAID*
9. clement_ghost - Blasted - EGR No *DEPOSIT PAID*
10. MSProtege(918) - Blasted - EGR Yes - JR Fuel Rail
11. destineal - Blasted - EGR Yes
12.
13.
14.
15.
 
Not sure to understand... You'll start the process even if we're not 10? Will it cost the same?

Yes and yes. I was hoping we'd hit 15 with the last few that were still on the fence, but we should have at least 10 after the other definite's log in and get the paypal info. If not we'll be just 1 or 2 short and I'll front the cost to get those made. Either way we'll have 10+.
 
1. Hammo - Blasted - EGR No - JR Fuel Rail *DEPOSIT PAID*
2. mazdaastina1999 - Blasted - EGR No
3. paniaguae640 - Blasted - EGR Yes - JR Fuel Rail *DEPOSIT PAID*
4. Marmas01 - Blasted - EGR No *DEPOSIT PAID*
5. Turboj1 - EGR No - JR Fuel Rail
6. younggredd -
7. googoo1oo - Blasted - EGR Yes *DEPOSIT PAID*
8. ZealoustheEnder - Blasted - EGR Yes *PART DEPOSIT PAID*
9. clement_ghost - Blasted - EGR No *DEPOSIT PAID*
10. MSProtege(918) - Blasted - EGR Yes - JR Fuel Rail
11. destineal - Blasted - EGR Yes
12. Spicymazda0323 -
13.
14.
15.
 
Oh and since the ceramic option was so unpopular I am just going to remove it. No real sense in keeping it up at this point.

1. Hammo - EGR No - JR Fuel Rail *DEPOSIT PAID*
2. mazdaastina1999 - EGR No
3. paniaguae640 - EGR Yes - JR Fuel Rail *DEPOSIT PAID*
4. Marmas01 - EGR No *DEPOSIT PAID*
5. Turboj1 - EGR No - JR Fuel Rail
6. younggredd -
7. googoo1oo - EGR Yes *DEPOSIT PAID*
8. ZealoustheEnder - EGR Yes *PART DEPOSIT PAID*
9. clement_ghost - EGR No *DEPOSIT PAID*
10. MSProtege(918) - EGR Yes - JR Fuel Rail
11. destineal - EGR Yes
12. Spicymazda0323 -
13.
14.
15.
 
hi there its green speed would like to get on the list working on getting the deposit together is the intake going to be a limited production only? can i get it natural finish no egr can you add me on please and thank you
 
Last edited:
hi there its green speed would like to get on the list working on getting the deposit together is the intake going to be a limited production only? can i get it natural finish no egr

Good timing... we're closing up shop here tonight on this. :) There is a very good chance that this will be the last batch of manifolds from me.

1. Hammo - EGR No - JR Fuel Rail *DEPOSIT PAID*
2. mazdaastina1999 - EGR No
3. paniaguae640 - EGR Yes - JR Fuel Rail *DEPOSIT PAID*
4. Marmas01 - EGR No *DEPOSIT PAID*
5. Turboj1 - EGR No - JR Fuel Rail
6. younggredd -
7. googoo1oo - EGR Yes *DEPOSIT PAID*
8. ZealoustheEnder - EGR Yes *PART DEPOSIT PAID*
9. clement_ghost - EGR No *DEPOSIT PAID*
10. MSProtege(918) - EGR Yes - JR Fuel Rail
11. destineal - EGR Yes
12. Spicymazda0323 -
13. greenspeed - EGR No
14.
15.
 
Material is all ordered, and machining on the flanges is getting knocked out next week. I am really going out on a limb here on these for everybody that is promising to get deposits in, so I hope nobody bails.


1. Hammo - EGR No - JR Fuel Rail *DEPOSIT PAID*
2. mazdaastina1999 - EGR No
3. paniaguae640 - EGR Yes - JR Fuel Rail *DEPOSIT PAID*
4. Marmas01 - EGR No *DEPOSIT PAID*
5. Turboj1 - EGR No - JR Fuel Rail
6. younggredd -
7. googoo1oo - EGR Yes *DEPOSIT PAID*
8. ZealoustheEnder - EGR Yes *PART DEPOSIT PAID*
9. clement_ghost - EGR No *DEPOSIT PAID*
10. MSProtege(918) - EGR Yes - JR Fuel Rail
11. destineal - EGR Yes
12. Spicymazda0323 -
13. greenspeed - EGR No
14. bwalt -
15.
----------------------------------------------------
 
1. Hammo - EGR No - JR Fuel Rail *DEPOSIT PAID*
2. Marmas01 - EGR No *DEPOSIT PAID*
3. ZealoustheEnder - EGR Yes *PART DEPOSIT PAID*
4. googoo1oo - EGR Yes *DEPOSIT PAID*
5. clement_ghost - EGR No *DEPOSIT PAID*
6. paniaguae640 - EGR Yes - JR Fuel Rail *DEPOSIT PAID*
7. MSProtege(918) - EGR Yes - JR Fuel Rail *DEPOSIT PAID*
8. mazdaastina1999 - EGR No
9. Turboj1 - EGR No - JR Fuel Rail
10. younggredd -
11. destineal - EGR Yes
12. Spicymazda0323 -
13. greenspeed - EGR No
14. bwalt -
15.
------------------------------------------------------------------------------------------------------
 
505zoom with your whole setup including this manifold and especially with the jay fuel rail would you recommend getting upgraded injector sizes? and would I even see a benefit too having bigger injectors?
 
Back