4x 100 spacers

[civickilla03]

hey guys i have been looking around for some spacers for my protege. i have found a few items but are there any specific brands you would recommend?

looking for a complete set with the 4 x 100 bolt pattern and about 9-11 mm spacing.

any on topic info is welcome! thanks!

 

[civickilla03]

bump?

 

[Joost27]

don't get cheap ebay ones, i made that mistake once, if u want everything so unbalanced it feels like ur car is going to fall to bits then go for it.

 

[civickilla03]

ok..... do you know were i can find a good set or maybe could you tell me a good brand?

 

[Wagonbacker9]

wheeldude on here carries them.

 

[03Cobra]

just make sure they are hubcentric, i'm running spacers on my 460hp cobra with sticky 315 rears and zero problems. if you are putting serious power down though i would recommend replacing the wheel studs with ARP studs. you'll never have any problems. plus depending on thickness of spacer, your stock studs may not have enough thread to safely secure a lug nut.

to make it even easier... you can also purchase integrated stud spacers that are boltons, take you longer taking off the tire than putting them on. more pricier but you don't get your hands dirty... but whats the fun in that

 

[03Cobra]

just make sure they are hubcentric, i'm running spacers on my 460hp cobra with sticky 315 rears and zero problems. if you are putting serious power down though i would recommend replacing the wheel studs with ARP studs. you'll never have any problems. plus depending on thickness of spacer, your stock studs may not have enough thread to safely secure a lug nut.

to make it even easier... you can also purchase integrated stud spacers that are boltons, take you longer taking off the tire than putting them on. more pricier but you don't get your hands dirty... but whats the fun in that

 

[civickilla03]

haha ok, yea i figured i would get hubcentric ones, and i def wasnt planning on cheaping out, i was looking into the 15 mm spacers so i would def have to get the bolt on ones.

 

[2k3 PrO RiDa]

I've been looking at this site for a set of 5mm spacers for my fronts. It says they're hubcentric, but only problem is that it doen't show fitments for 01-up in 4x100, and im not even sure if the hub bores are the same.

Here's a link to a 15mm set though:
http://www.allsprings.com/catalog/mazda-hr-wheel-spacers-drs-15mm-4x100.htm