I was hoping somebody here knows how to replace the rear heater control (TN39-61-325) of a 2020 Mazda CX-9 Touring (with captain's chairs). I was able to pop off the console cover at the top, but the cover is still connected somehow at the bottom, which gives me little room to work. I then removed the screws at both sides of the heater control, but the control is still fixed in place. I couldn't figure out how to unlatch the clips at the bottom of the control, which I assume might be the problem. Any help would be much appreciated!
Rear console:
The part I'm trying to replace:
Back of the part (it seems to be connected to the car with (at least) screws on the sides and the 4 clips at the bottom):
Rear console with top popped off. The console cover is still somehow connected at the bottom.
Side view:
Rear console:
The part I'm trying to replace:
Back of the part (it seems to be connected to the car with (at least) screws on the sides and the 4 clips at the bottom):
Rear console with top popped off. The console cover is still somehow connected at the bottom.
Side view:
