2003 p5 engine swap need some advice

[Driv3n]

Alrighty I have recently bought a 2003 p5 and I need to swap the 2.0l out because the engine is blown
Now I have been trying to research and have come up vertualy empty handed
I do not want a new engine I'm going used and sticking with the 2.0l
Is there any differance between a protege5 2.0 vs a protege2.0l
Or is everything the same? ECM, sensors, motor mount? Any advice would be
Awesome thanks guys!

 

[sneakypete]

Everything is the same.

 

[sneakypete]

As long as it is from the 2.0, it will swap right over, no modification needed.

 

[Driv3n]

We'll that's good news! Thanks for your reply

 

[Driv3n]

Is there any difference between a 2.0l auto or a 2.0l manual? mines a 5 speed manual

 

[Ice88]

Besides the auto parts no.

 

[Driv3n]

So it will bolt right up no matter if its a standard or auto the bolt pattern is the same for both?

 

[betting101]

hello i just did this swap listen .... swap the valve cover(may have diff coil set up may not) intake manifold, crank pulley ,crank sensor, the cam sensor on the valve cover, and yes it will bolt rite up mine was a jdm auto 626 motor, use your flywheel and etc.. the wiring is easy just set it off to the side lay the ac pump on the ground make sure you remove the motor and trans together it will not come out if not. any info i will be glad to help