1.6 Parts plus 3Gen Suspension FS

[biknman]

Update as of 01/09/08 07:03am

Be sure to check back often as items are added soon I may have some Auto-meter phantom gauges available. Also if you have or know someone that has a GD body 02-05 Subaru WRX/STI I have several items for sale.

All is first come first serve.

Payment accepted via Paypal only. You supply me with your address and I'll send you a quote for shipping via UPS ground insured. Once sale is agreed upon I'll send a invoice to your paypal account id for payment. Once payment is received I usually try to have items shipped within three business days. I'll provide you with a UPS tracking number as soon as possible.


I have three stainless steel exhaust flanges for DIY header left. $80 plus shipping.

A set of APC carbon fiber look mirrors manual adjustment. Make offer plus shipping

And couple of rear CF wings/spoilers one that's straight and one that is 3D in shape and type. Make offer plus shipping

MOMO Mod 08 3-spoke has a very deep dish of 90 mm to place the steering wheel closer to the driver for improved comfort while racing black suede and back center spokes $80.00 plus shipping

Momo Race Air carbon shift knob and e-brake handle $50 each plus shipping pic below

Autometer Phantom and Auto-lite series gauges PM for details: available Fuel pressure guage, Oil pressure guage, water temp gauge, AFR gauge, trans temp guage.

Boost, EGT, Shift lite, TT SOLD

AWR carbon fiber dash replacement for Racing only! Has wing-nut dzus fasteners installed and trimmed around HVAC area. This is a race part intended for weight reduction in race cars which need to keep a stock appearing dash. It should not be used for any street applications. Expensive to ship ref http://www.awrracing.com/store/produ...products_id=57 $100 plus shipping

Local pick up only used but good condition ZM 1.6L short block, F25M-R series manual transmission minus ring gear, modified steering rack with heavy duty aluminum radius rods and heim jointa for rod-ends includes an adjustable bolt at spindle for making bumper steer corrections make reasonable offer LOCAL PICK UP ONLY.

For YOUR ENJOYMENT
The following pictures are what she looked like the weekend before she was dismantled 09/08/07. ;( For picture references a lot of the modifications that my little 99 1.6er went though over the years may be found here: http://biknman.shutterfly.com/action/ under the album Mazda Race Car Enjoy!

Thanks
Dave

 

[shootz]

So, I am totally excited about some of the stuff you have for sale... but you are in maryland? Bummer. Hey, just wanted to let you know that your links don't work, except for the last one. Sorry. Interested in the AWR sway bar if it will work on my 99 pro. Also, what's shipping look like to 97123?

 

[Azaizai]

wow, what the hell is this all coming off of?

 

[biknman]

wow, what the hell is this all coming off of?

1999 Protege 1.6l MTX made into a Hill climb (PHA S2) Time Attack (TTU) highly modified class race car.

 

[biknman]

So, I am totally excited about some of the stuff you have for sale... but you are in maryland? Bummer. Hey, just wanted to let you know that your links don't work, except for the last one. Sorry. Interested in the AWR sway bar if it will work on my 99 pro. Also, what's shipping look like to 97123?

Sorry about that may have to cut and paste the link and take out some of the URL. Also check out some of the follwoing threads I have some of the stuff FS listed in i.e. http://www.mazdas247.com/forum/showthread.php?t=123684033
http://www.mazdas247.com/forum/showthread.php?t=123684716

Rear Sway bar with adjsutable endlinks and mounts shipped to you $125 Check or MO if paypal add 3% for transaction fee. PM me for more info.
Thanks
Dave

 

[P2K]

Damnit!!! Just when I decide to get rid of my car this thread pops up! Good luck with the sale.

 

[red95_240sx]

this is some good stuff.

 

[Witchdoktor]

great seller, great parts.

thanx dave

 

[steve_protege]

You have a PM!! And what other parts are available if sales don't go thru? Let me know in PM. Thanks.

 

[biknman]

Stuff left.

See first post for the most recent updates

You have a PM!! And what other parts are available if sales don't go thru? Let me know in PM. Thanks.

What I left For Sale

A ACT stage 2 four puck clutch with a new clutch plate and new throughout bearing and I’ll include a stainless steel clutch line for free. $100.00 USD plus shipping.

A B&M short shifter with a Kart boy Sliver knob and shifter bushings $100.00 plus shipping.

A Fiber Images (no longer made) EVO style Carbon fiber hood with Redline hood struts and hood pins $200.00USD plus shipping and a AWR Carbon fiber dash replacement $50.00USD plus shipping.

AWR fabricated trailing arms all with adjustable spherical heim joints and the spacers needed to custom fit the kit to the rear suspension of a 3gen Protg 100.00 plus shipping. These are not the ones you see on AWR’s web site they are much beefier made from aircraft gradee radius rods and upgraded stainless him joint with derlin bsuings.

AWR front control arms which make a great complement to the rear links and arms. I'm asking $300.oo USD for both plus $25.00 for shipping. Which is less than half price if bought new from AWR. Plus you get the special pin and collar ball joint for bumper steer / camber gain correct which is extra from AWR. The new with the ball joints it would be over $800.00 USD. And they only say about a dozen events just like the rest of the suspension. There is a few nicks in the powder coat form when I had to replace the broken axles and when I had to but in a transmission. They are a reinforced so there is no deflection with all spherical bearings instead of rubber bushings and of coarse the pin and collar special ball joint (outer pickup point) to correct bumper steer and camber gain on a lowered car.

-


Thanks,

 

[biknman]

Found more stuff for sale 1.6 exhaust header flanges

Great new for all you 1.6ers planning on going turbo in the future. I have the one major component needed to make a turbo kit for the 1.6 ZM motor the laser cut Stainless Steel exhaust header flange. Everything else is universal parts that can bought and easily fabed up. I few left once ther gone ther gone I'll not be able to get anymore. I'm letting them go for $50.00USD. PM me if interested.

 

[biknman]

GOOD NEWS ! Four exhaust header flanges found

For all you guys and gals that are thinking about a turbo kit or a NA header I have the most important piece for making the kit or header the exhaust flange! They are port matched and laser cut from stainless steel (three left) or steel (one left) for use on the 3gen 1.6 ZM Head. Everything else can be bought as a universal item and then just fabricated. $80.00 plus shipping. FYI when they are gone they are gone I don't not have the ability to make any more.
Thanks
Dave

 

[00pro16]

Witchdoktor is right. great seller & great parts. Also great care w/ the packaging of what he sold me.

Thanks again Dave

 

[biknman]

Thanks for the kind words.
Dave

I still have what's listed in the first post for sale.
Again
Thanks
Dave

Witchdoktor is right. great seller & great parts. Also great care w/ the packaging of what he sold me.

Thanks again Dave

 

[red95_240sx]

u only have 2 coilovers?

 

[biknman]

u only have 2 coilovers?

NO longer available sorry!

But the GC adjustable front camber plates and AWR rear plates are.

 

[biknman]

Item sold added and request for brake info

See first post for the most recent updates

Item sold request to help other 1.6s with brake stuff
THe rear drum to disc brake kit SOLD

THe AWR front endlinks SOLD

Motor mounts and subframe SOLD

ANd I have one less stainless steel exhaust flange for DIY header.

THe Coil overs no longer available as I'm using them on another project. But he Camper top plates are see below.

Still have all the other stuff. and I've I've added

Also found a set of rear APC carbon fiber look rear taillights. Make offer plus shipping

Front set of Ground Control adjustable camber caster billow ball strut top plates. $150.00 plus shipping

Rear set of AWR billow ball struts (aka spherical bearings) tops $100.00 plus shipping

And couple of rear CF wings/spoilers one that's straight and one that is 3D in shape and type. Make offer plus shipping

As Witchdoktor is doing by documenting the forged build of the ZM motor. If the two guys I've sold the fornt BBK kit and rear drum to disc conversion kit are willing to make some drawings(tracings) on graph paper of the brackets along with listing all the diameters and dimensions before they install them, that would allow all the the other 3gen 4x100 Protegees to build their own front BBK and rear drum to disc conversion kits. Also would need a list of either the part numbers for the Wilwood calipers and rotors or detail descriptions i.e. caliper mounting hole/tabs length, distance, and diameter then the rotor hat dimensions with the rotor overall diameter and thickness measurements. Armed with all that info one could get the brackets made at machine shop or make them yourself and then give all the info on the rotors and calipers to say good race shop like HRP WORLD, CDOC, Wilwood direct , AWR, etc and they be able to get the proper caliper rotors and some stainless brake lines with proper adapter to hook up to the stock hard lines and calipers. I had all the info but after several computer cashes and my home burning to the ground in 04 lost it all.

Thanks
Dave

 

[biknman]

First post has latest updates and recent additions

BUMP

Checkout the first post in this thread for the latest on whats available and additional items added for sale. I'll be adding more items over the winter so stay posted. Next up will be some Auto-meter Phantom gauges.

Be sure to check out the end of the Post for some pictures of the 1er that could get-r-done! Taken the weekend before she was dismantled.
Enjoy

 

[Not Jo3L]

Dibs on the corksport strut tower bar.

How much to ship to so cal?

 

[biknman]

Dibs on the corksport strut tower bar.

How much to ship to so cal?

PM me your city and zip?
Thanks
Dave