Search results

Sweet, thanks!

Did you install it this weekend? If so how is the fitment? Did you feel a noticeable difference in power? And how hard was the install?

Just curious, at the bottom of the stock piece there is that part that sticks out to the side. What does that hook up to and why doesn't the CS one have it?

Well I am not too skilled when it comes to speakers, I just wanted to put the 6x9's back there because it was already wired. What are some good component speakers to replace the stock ones? Is it even worth doing?

Ok thanks for clearing that up for me. Looks like I will be getting the 6x9's after all and I will just run those off of an amp that I already have. Thanks again for the help.

Don't our cars come with 7 speakers stock? 2-tweeters, 2 in the front doors, 2 in the rear doors and 1 8" sub? I have another amp waiting for the 6x9's when I order them so they won't be running off of the deck.

So then if remove the rear box that the sub was in, can I install some speakers back there with no modifications? My 8" sub blew along time ago so I just want to remove the box and install some 6x9's or what ever size fits back there.

So there are no speakers under the 2 kenwood screens behind the back seat? I haven't taken out the box for the sub yet so I haven't got to check.

Are our 6x9's powered by the amp that the car comes with or are they ran off the head unit?? I don't think my 6x9's are working now that I removed my amp.

Well now that you put it that way, I don't really want to see a rusted mainfold. I just need some bolts to hold it on there. It is missing at least 4 bolts and it rattles pretty bad. Does anyone know the size and threading on the bolts? What compound should I use to get the best shine out of the...

I just noticed I am missing a couple bolts from the heat shield. I was wondering if I could just take of the heat shield? Will is affect anything if I take it off? Is there anything that will get too hot if it isn't on there?

THere should be a little nipple coming of the intake and you run the hose from the valve cover to the nipple. There should be hole with a gromment on the intake and 1 of the electrical plugs should fit in it. Is the other plug the one that plugs into the MAF sensor?

I have the injen too, but I didn't get a bracket with it. Correct me if I am wrong, but don't you use the exising bracket that the coolant bottle is on? I remember having to bend the part of the bracket that is at a 90 degree angle. You just have to make it flat so that you can swivel the...

I have the carbotec bobcats and I have more than half of the pad remaining. They squeak every time I brake, fast or slow. Does anyone else have this problem? If so how did you cure it? Thanks

Still on my original HU. Blew my sub up with a firecracker when it crapped out on me the 2nd day I had my car.

Nice color, but lambo doors belong on lambos.

I have the JoeP and it never spikes more than .5 psi. Holds 8psi all the way to redline every time.

I have had mine for about 2 months now, not a single problem with it. I have the 30vac/30psi and it reads both just fine.

I am going to install my front motor mount this weekend. Do I need to torque anything down or just as tight as I can make it? Any special tools I need to know about before I start? Thanks in advance for the help.

You will definitely need a set of allen wrenches. You need a pretty big one to get the caliper bolt off. And make sure you have a socket set as well. You probably have both of these, but I know you will need them both. Just giving you a heads up. The caliper bolts are on there really tight.