Mazdas247 Marketplace

Located in Milltown, NJ Cost: $380 shipped ( everything pictured/listed below) Bilstein PSS kit(front struts/rear shocks) w/Blue springs (285lb/230lb) Rear spring height adjusters (as included with the kit) Machined front spring perches to accommodate 2.25" linear springs Pair of KYB AGX rear shocks with custom bump stops Pair of Eibach/Ground Control GC200.64.67 (8/2.5"/380 lbs) Modified stock upper strut mounts for additional -1.0 of camber. --and to accept spring tenders (if you decide to go with 2.25" springs) Coilover perch wrenches(not pictured but included) Pair of rear shock boots and shortened bumpstops (on Bilsteins) Reason for selling: This off season I decided to jump into the deep end of the pool and am having...

Hi everybody I've sold my MSP and I found these parts I had left over. The kartboy exhaust hangers and AWR rear motor mount are Brand New never installed, and the Microtech LT8, steel braided brake lines, and WRX 440cc injectors I bought used with low miles but I didn't have a chance to instill them before I sold the car. All parts are BEST OFFER but please no lowballers. Thanks

New Canadian EGR Valve - SOLD Used Flashed MSP ECU - $125 shipped OBO

FS: SOLD Protege Intake Manifold with VCTS Removed & Plugged Protege manifold with VCTS removed. The entire VCTS mechanism was removed, then the old shaft bores were tapped (threaded). The holes where then plugged using aluminum threaded rod while using JB Weld as "loctite." After it cured, I used a Dremel sanding drum to smooth down the transition at each port. I never installed it, and it has been collecting dust. The car is gone, and I'd like this to go to someone who can use it. I'll sell it for $25 PLUS SHIPPING via UPS or FEDEX only. (Sorry, USPS just damages heavy stuff). Upon an offer, I'll box it up and get a UPS shipping estimate via the box's dimensions / weight. I will ship when the total is received via Paypal. If...

19" Rims Mazda 6, 3, 2, CX-9 CX-7 Mazdaspeed Set of 4 19" x 7.5 OEM Mazda6 Wheels. The bolt pattern is 5x114.3 they fit mazda 5, 3, 6, 2 mazdaspeed3 mazdaspeed6. The rims are in great shape. They come with center caps and lug nuts. 700 obo. May consider trades. Will come with 2 19" tires. 255/40/19 They have 6/32 tread List Date: 11/28/2014 Location: Cedar Rapids, IA, United States For more info, click here to view the original listing: 19" Rims Mazda 6, 3, 2, CX-9 CX-7 Mazdaspeed -------------------------------------- On Sale For: $700.00 (Local Pickup Only) --------------------------------------

2008 Mazdaspeed3 GT Leather seats I have a set of driver and passenger seats out of my 2008 speed3. They were installed for about 30,000 miles before i upgraded and took them out. They are in really good shape except for a little wear on the driver's side bolster which is expected. I will post pics of any flaws. There are no stains on the seats so if it appears that there are it is just a shadow. If you would like to see any additional pics please ask. I would like to sell without shipping if possible but if you are willing to pay shipping I will box them up and get them out to you. I would like to get $500 before shipping but I will consider other offers. These would be great for anyone wanting to upgrade to the factory leather seats...

2008.5 GT F&R seats/door cards...leather w/alcantara 2008.5 Mazdaspeed 3 GT leather w/alcantara interior (Front driver/pass, complete rear bench, AND interior door cards for all 4 doors) Excellent condition. ASKING: REDUCED to $1000 OBO. Negotiable. Talk to me. Let's deal. Now. You deserve these seats. Took the seats out back in June and forgot to post these brighter, updated pics. Please disregard the loose debris/particles. Asking reduced

i have a brand new 38mm waste gate with 8lb spring in it has never been used comes with gaskets and bolts asking 60 shipped txt 778-549-6834 https://www.facebook.com/photo.php?fbid=10152421997436965&set=a.10150261993066965.326984.634776964&type=1&theater

For sale A yellow strut bar with complete brackets and nuts. It was removed from my mazda protg 2.0 Asking $75 shipped to US

WTS: 1. Protege 5 Stock Radio knobs Purchased these thinking they would fit regular sedan radios. They don't. $15 shipped obo or trade for Sedan knobs. Protege5 MPV Radio Knob (2) by la510, on Flickr Protege5 MPV Radio Knob (1) by la510, on Flickr 2. MPV Intermittent Wiper Stalks for the Sedan, Speed, and P5 Allows for adjustment of the speed when you put the wipers on delay $23 shipped MPV Wiper Stalk (1) by la510, on Flickr MPV Wiper Stalk (2) by la510, on Flickr 3. Fog light Switch $20 Shipped Fog Lamp Switch (1) by la510, on Flickr Fog Lamp Switch (2) by la510, on Flickr Fog Lamp Switch (3) by la510, on Flickr Fog Lamp Switch (6) by la510, on Flickr 4. Dashboard Dimmer Switch $10 Shipped Dash Dim Switch (1) by la510, on...

Winter tires for CX-9, 20" Blizzak DM-V1 Winter tires for CX-9 20" Bridgestone Blizzak DM-V1 SL P245/50R-20 Used only 1 season. Lots of tread left, all tires are in great condition. No longer own my CX-9 so I must sell these. $475 Local Pickup only in Northern NJ List Date: 11/16/2014 Location: NJ, United States For more info, click here to view the original listing: Winter tires for CX-9, 20" Blizzak DM-V1 -------------------------------------- On Sale For: $475.00 (Local Pickup Only) --------------------------------------

FS: CPE gauge pod MS6, Spin on oil filter conversion kit, Cobb XLE bypass valve, etc Need to get rid of these parts laying around in my garage. I have not used any of these except for the bypass valve, which works fine. No issues with it. Everything else should work fine. CPE gauge pod w/ Pro sport oil temp, Pro sport oil pressure and Pro sport water temp gauges: $200.00 (willing to sell individually) Spin on oil filter conversion kit with sandwich plate: $75.00 Cobb XLE BPV: $175.00 Oil pressure sender wire: $25.00 Pro sport boost gauge: $50.00 Pm me if interested. List Date: 4/15/2014 For more info, click here to view the original listing: FS: CPE gauge pod MS6, Spin on oil filter conversion kit, Cobb XLE bypass valve, etc...

OEM Mazdaspeed 6 Antenna Selling a used OEM Mazdaspeed 6 roof antenna. Works fine & is in very good condition. Will ship anywhere in the U.S. via FedEx Ground. List Date: 11/23/2014 For more info, click here to view the original listing: OEM Mazdaspeed 6 Antenna -------------------------------------- On Sale For: $10.00 --------------------------------------

*New* OEM Mazda Cargo Net CX-9 Mazda OEM Cargo Net for CX-9 for CX-9 Part Number: 0000-8k-N02 Asking $40 (Dropped from $45) **Buyer pays for insured shipping (UPS or FedEx Ground)** Accept PAYPAL for payment or cash if local pickup. List Date: 2/25/2014 For more info, click here to view the original listing: *New* OEM Mazda Cargo Net CX-9 -------------------------------------- On Sale For: $40.00 --------------------------------------

Built 2.3 MZR engine part out I have a built 2.3 MZR that spun two rod bearings. Crower Cams Crower valves Crower valve springs Eagle Rods Crower Crankshaft (needs machining) Bare Block with girdle in good shape (main bearings drilled and pinned) Cosworth dry sump oil pan (needs the scavenge pump rebuilt) I have pictures but the site says they are too large to upload. txt me at four four 3 six 7 six 7 zero 2 six Payment via paypal accepted. Buyer pays shipping fees. The price will depend on what you are getting. List Date: 11/21/2014 Location: Baltimore, MD, United States For more info, click here to view the original listing: Built 2.3 MZR engine part out -------------------------------------- On Sale For: $1.04 (Local...

CX-5 Curt Trailer Wiring Harness Bought this wiring harness when I installed a hitch on my CX-5, never installed the wiring harness. Harness is in like new condition, took it out of the package and that is it. The CX-5 is gone so I have no need for this harness. The harness sells for ~$40 on etrailer.com, I am asking $25 http://syracuse.craigslist.org/pts/4747760570.html List Date: 11/19/2014 For more info, click here to view the original listing: CX-5 Curt Trailer Wiring Harness -------------------------------------- On Sale For: $26.01 --------------------------------------

I bought this off another user a while ago, never got around to installing it. Just selling what I paid for it. $100 plus shipping

Rear View Mirror with Auto Dimming/Compass/Temp Gauge (inside/outside) NEW auto dimming/compass/temp gauge (inside/outside) rearview mirror. Going in a different direction so don't need this. The base clips right on to the existing rearview mirror mount so you do not need to glue on a questionable base. The feel and quality of this mirror is top notch and I'm selling for a lot less than I paid for it. List Date: 12/22/2013 For more info, click here to view the original listing: Rear View Mirror with Auto Dimming/Compass/Temp Gauge (inside/outside) -------------------------------------- On Sale For: $140 + $0 Shipping -------------------------------------- Mobile friendly version: Rear View Mirror with Auto Dimming/Compass/Temp...

Some of you may know me already. My name is Rick Schoeffler and I offer custom headlights to people. I am here to check the interest here on 247 before spending the money on a status here. Ill try and get some pictures up tonight of the work I have done. Not much I cant do really, but just checking interest to see if it would be worth it here. Please do not ask pricing or details as to I do not want to cross any boundaries here of what I can and cant do as of right now. Thanks for your time!

AutoExe Member Brace Set for 2004 to 2009 Mazda 3 AutoExe Member Brace Set this is all new never installed i had it powder coated in black to make it stealth $700 shipped this part cost $800 from street unit List Date: 11/7/2013 For more info, click here to view the original listing: AutoExe Member Brace Set for 2004 to 2009 Mazda 3 -------------------------------------- On Sale For: $720.91 + $0 Shipping --------------------------------------