Mazdas247 Marketplace

Michelin Pilot Alpin2 (PA2) 215-45-17 under seller [removed], great deal (2 available)!!! Also some used SZ-50 on there, +1 size for the MSP (4 available - 2 not listed yet)

NEW YEARS EVE SALE! Fogs, intercooler pipe,clamps,intake,BPV I have a few parts left over from my Mazdaspeed Protege after doing a FMIC install, as well as other miscellaneous parts. Feel free to make an offer on anything, I want this stuff gone. I prefer to sell local, or ship in the contiguous U.S. (4) 2.5" Straight Intercooler Couplers - SOLD (4) 2.5" Intercooler T-Clamps - SOLD 2.5" Intercooler Coupler T-Shape (1" T) - SOLD (1) 2.5" Aluminum Intercooler Pipe - $15 each (One sold) 2.5 " 90* Aluminum Intercooler Pipe - SOLD Stock MSP BPV - SOLD Stock Intercooler Pipes (no cracks, one scratch on cold side) - $30 Stock MSP Passenger Side Cooling Fan (works great, went with a slim fan) - $15 Stock MSP Air Intake (missing "ram air"...

Does anybody know where I can get a plastic engine cover for a Mazda protge5 2002?

Have a set of calipers for sale from the rear of a 2002 Protege5. Absolutely no issues with these, always greased and kept clean. No rust anywhere, no rips in the seals, piston moves freely. Just took these off to upgrade to MSP rear calipers. Only thing missing is ONE copper O ring. Misplaced it when I took them off, should be able to reuse your OEM ones. Can also include slightly worn rear pads, semi metallic, for free if desired. Price= $50 shipped in the US Paypa ONLY, feel free to make offers.

Parting out my baby, she's been good to me for the last 12 years, unfortunately the family has outgrown her. Located in Ithaca NY First, details on the car: - 175,000 - Red - 5 speed manual - CA emissions certified CAT w/ only 6,000 miles on it. (Not sure if this is legal to sell or not, may need to do some research 1st) - Injen Cold Air Intake - exterior has rust (mainly rear wheel wells) and large rust/fracturing in the frame. - interior is in OK condition - repainted interior accent pieces to a Red to match exterior -- can be easily sanded and repainted - leather shifter boot - Transmission has only 55,000 miles on it -- Replaced a few years ago w/ a tranny that only had 5K on it - ACT Heavy street racing clutch kit - installed w/...

I have a RARE, BRAND NEW Perrin intake for the MSP. Never been used. Bought it brand new from a forum member a long time ago, and has been collecting dust. Only piece missing is the Perrin filter, which you can purchase direct from perrin if you want. Price= $60 shipped in the US Paypal ONLY, feel free to make offers

CA 2008 Mazdaspeed 3 sport For sale is my 2008 Mazdaspeed 3 Sport. This the the absolute lowest price for this car you will find. This is the speed 3, the turbocharged version of the standard 3 which includes the turbo 2.3 engine, upgraded interior, upgraded seats, 6 speed manual transmission, LSD, upgraded suspension, and upgraded brakes over the standard Mazda 3. I am the original owner and have owned the car since August of 2007. It has been my daily driver throughout that time. Car just had a compression test, compression was good across all four cylinder. Registration was just paid, so you are good until August of 2015. Mileage: 114,000 miles (will increase slightly as I drive 20 miles a day round trip) Price: $6,895. Car is...

TSW Jerez 19 x 8 +35 5x114.3 For Sale are some lightly used TSW Jerez 19 x 8 +35 5x114.3 for $800 OBO. Local pick up is available. List Date: 1/9/2015 For more info, click here to view the original listing: TSW Jerez 19 x 8 +35 5x114.3 -------------------------------------- On Sale For: $988.57 --------------------------------------

Mazda 2 all weather floor mats Hello all, I have for sale a full set of all weather floor mats for the mazda 2. These are in great shape, just alittle dirty. No tears or rips in the mats though. These have saved me many times from spills and wet feet. Hopefully they can save you too! Any questions don't hesitate to ask! Thank you! List Date: 8/22/2013 For more info, click here to view the original listing: Mazda 2 all weather floor mats -------------------------------------- On Sale For: $50 + $0 Shipping --------------------------------------

SOLD DDM HID Kit, 35W, H7, 5000K + wiring harness (NEW / never been used) SOLD Why is it for sale? Well, I never got around to installing it after purchasing it 2 years ago and I've decided to keep on using cheap ebay halogen bulbs instead. May this kit find a new user. Originally paid: $68.53. Asking price: $50 shipped

Edelbrock 70001 Nitrous System this is a brand new, unused, still in original packaging model # 70001 Edelbrock nitrous system. full bolt on system for square flange carbs. includes carb bracket, stainless steel braided pressure lines, electrical switches, mounts and hardware, fuel and nitrous solenoids, all installation hardware and 20# bottle. this kit has been opened for inspection but is still complete and in original packaging. THIS KIT CAN BE USED ON ANY VEHICLE. YOU WOULD JUST HAVE TO MODIFY TO INJECT INTO INTAKE MANIFOLD RUNNERS INSTEAD OF CARB. IF BEING USED FOR FUEL INJECTION. CONTACT ANTHONY AT 952-353-6481 TEXT PREFFERED. List Date: 6/16/2014 For more info, click here to view the original listing: Edelbrock 70001...

selling the kenwood box from my 2003.5 mazdaspeed protege. comes with alll the mounting hardware, cables, as well as the kenwood amp and 8" sub. everything works great. i am selling this because i am a stereo nut, and going with a more custom install (build thread to come soon!) the box and began to separate in a couple places, so i took it apart, and re-glued and added more screws to strengthen it. the new screws were pre-drilled and countersunk to keep it looking stock as possible. i haven't seen one for sale in a while, but i think $150 +actual shipping is fair. especially since it comes with the sub and amp (likely ups ground, but i can ship however you would like) i would guess shipping would be around $40 depending on zip...

Alright, today is the day I put her up for sale! It's a sad day, to be honest. 2003 Mazda Protege5. Silver, naturally aspirated, unfortunately. Manual transmission. You are the third owner. ~160,000 miles, she's in the garage right now. Garage kept Cosmetically modded (painted bumper and a custom shift boot...) Performance completely stock. Weekday driver, never driven hard. All Highway miles. I barely drove this car, wish I did more. Asking $3,500 but negotiable. I've owned this car for about a year and a half now. And here's the good. I'm the second owner, I bought it off the original owner and paid the last of his lein. Clean title. Interior is in very good condition, minus I few scrapes on the center console by the...

I have two open top style cup holders I refurbished here. The first one, I got from the junk yard with my 2003 console originally but it was in pretty bad shape. So I decided to get another off someone here. That wasn't to my liking either. Since I was so picky, I ended up buying a brand new one from Mazda. they're now sitting here... I need to get rid of these... I did the hard work for you, the lucky buyer: I have since patched them and repainted these using Duplicolor Seattle Silver Metallic paint... They're a pretty good match to the 2001-2002 Protege's titanium silver dashboard panel for those of you looking into upgrading your cup holders to the better open top ones. So for the cost of what I paid for the cup holders, plus cost...

OEM Mazda Mazda5 winter rubber mats Full set of OEM Mazda5 winter mats, good shape and made to fit 1st and 2nd row of seats. Local pickup in Woodbridge, Ontario Canada. List Date: 12/30/2014 Location: Ontario, Canada For more info, click here to view the original listing: OEM Mazda Mazda5 winter rubber mats -------------------------------------- On Sale For: $125.00 (Local Pickup Only) -------------------------------------- Mobile friendly version: OEM Mazda Mazda5 winter rubber mats Go Mobile: Download the free Panjo iOS app now!

Hey guys, selling my car because the butterfly in the intake throttle body was not responsive and cause my car to break down and found that my head gasket is leaking. Everything OEM except for aftermarket Boost Gauge. Located in Las Vegas, NV. Thanks

Custom Genpu 8in stealthbox custom 8 inch stealthbox for a 2010 on up . this baby snuggly fits where the jack goes and uses the same mounting point as the jack so it locks in flush and super tight. i re-upholstered it this morning so its fresh and clean for you took some pics of it in its place, dont really need anymore since i built a new box where the spare goes. i put alot of time and money go into building this great piece. i was running a 350w rms alpine type-r 8 with a apline m500 pretty hard. had the hatch knocking amazing for an 8. you can use the typer 8 specs to get an idea of what the box accomodates size wise but id stick with what i made it for. Please note: that some trimming and cutting on the inside of the stock...

I have a 03 pro es auto with 122,000 that was in a frontal collision after towing it home it seems the alignment was not affected and it will need new radiator support, radiator, grill, bumper,bumper skin, condenser if you want air, hood and passenger headlight - big ticket items. graveyard is offering $500 picked up I am just judging interest on here to see if it is worth parting it out / fixing it or junking it. ALL STOCK - motor is running good -no oil usage -trans no issues basically everything worked except one rear wheel abs sensor. Let me know what parts you need and I will judge the interest and see if these parts are still in demand. Thanks Dave

decided not to sell........for now.

Cobb MS3 SF Intake System **Price Drop** Up for sale is a Cobb Tuning Mazdaspeed3 SF Intake System bought for a 2007. It should fit the other years as well. I have replaced the original Cobb filter with an AEM dry filter. $135 shipped. List Date: 12/22/2014 For more info, click here to view the original listing: Cobb MS3 SF Intake System **Price Drop** -------------------------------------- On Sale For: $135.00 --------------------------------------