Marketplace

as the title states i am selling Prosport Gauges. Part numbers can be seen in the photos. All items are brand spanking new. Prices will be 8% off the prices on Prosports site. Payment will be via paypal, and shipping is not included. but should only be $10-$15 depending on how much stuff you get. Stuff... There are Evo Series, Premium Peak and Hold, and Regular Performance series. Let me know, thanks. Current Part Numbers of the items i have in the photos: 216smwabowncl270-pk.psi 216evobo-psi (2 of them) 216evoop-psi 216evowt-f 216evoot-f 216bfwaebosm.psi 216smfpswl270-pk.psi 216smwtswl270-pk.f (2 of them) 216bfwawtsm.f 216bfwbwt-sm.f 216smopswl270-pk.psi 216bfwbopsm.psi 216bfwafpsm.psi 216smotswl270-pk.f (2 of...

CP-E Catless Downpipe Catless downpipe from CP-E. Adds tons of power and makes the car sound amazing! Used for about 5000 miles. Sold car so don't need it. Comes with defowler so you dont get a CEL. And comes with hardware for install. No gaskets needed and it replaces the test pipe too. List Date: 8/10/2013 For more info, click here to view the original listing: CP-E Catless Downpipe -------------------------------------- On Sale For: $421.05 + $0 Shipping --------------------------------------

HID retrofit bits For Sale are some parts I never ended up using when I installed HIDs in my 2008 Mazda3. HID leveling switch (1) 2 mazda wiring pigtails for HID leveling (these plug into the HIDs directly an need ground, power, signal) There are wiring instructions that can be found on the forum. I have just lost interest in making these improvements, parts are open, but were bought new from mazda. Thanks for looking, exNeon List Date: 12/20/2013 For more info, click here to view the original listing: HID retrofit bits -------------------------------------- On Sale For: $20 + $5 Shipping -------------------------------------- Mobile friendly version: HID retrofit bits

Mazda keychain. Brand new, has Mazda dealer info screen printed on the back. $10 shipped. PayPal accepted. Authentic Mazda Japan coin holder. Brand new in wrapper! $25 shipped. PayPal accepted. SOLD! http://i111.photobucket.com/albums/n124/a2ron88/Mazda%20Parts%20FS/DB6DA30D-EB9C-4FAF-919C-171E188C9775-488-000000DADDDA78DD.jpg http://i111.photobucket.com/albums/n124/a2ron88/Mazda%20Parts%20FS/3E37157F-BB97-4E3F-A781-9086B069AA55-488-000000DAE91ABE99.jpg

Mazdaspeed3 Part Out Will Sell the whole grab bag for $200, or split up - make me an offer... Street Unit Silicon Boost Tubes Mazda3 Vent-Pod AutoMeter Boost Gauge AutoMeter Gauge Pod Redline Leather Shift Boot HKS Turbo Timer List Date: 8/3/2013 For more info, click here to view the original listing: Mazdaspeed3 Part Out -------------------------------------- On Sale For: $211.05 + $10 Shipping --------------------------------------

Mazda 2 OEM Alloy Wheels 2011 Mazda 2 Touring, 4 OEM (15X6) Alloy Wheels I took these wheels off my car two years ago and they are in great condition. List Date: 12/8/2013 Location: Orange County, CA, United States For more info, click here to view the original listing: Mazda 2 OEM Alloy Wheels -------------------------------------- On Sale For: $300 (Local Pickup Only) -------------------------------------- Mobile friendly version: Mazda 2 OEM Alloy Wheels

RX 8 Racing Beat Polished Stainless Steel Exhaust I have several performance parts off an 08 rx8. racing beat exhaust $300, racing brakes 4 piston calipers with 2 pieces rotors $2200, short throw shifter $100 chassis brace set $150 fidanza flywheel $150 and a custom sub box to fit tightly in driver's side corner of cargo area $100 contact Taylor 714-865-1804 List Date: 12/18/2013 Location: Orange County, CA, United States For more info, click here to view the original listing: RX 8 Racing Beat Polished Stainless Steel Exhaust -------------------------------------- On Sale For: $300 (Local Pickup Only) --------------------------------------

Just cleaning up my closest on some of these parts that i have no use for.Camera on my phone isnt the greatest, I have the following stock parts for sell: Stock MSP intake box and arm. 30 shipped Stock MSP Intercooler piping, Little bracket that is near the throttle body broke off. It is taped not sure how well its holding up. Missing one clamp aswell. 35 shipped for these Factory MSP Fog lights with bulbs and harness, Great shape alittle dirty but other than that great shape. No cracks/broken glass. 100 shipped

As the title says I have a few parts for sale. The longblock is complete with 140k on it. It was removed in running condition. Just burns oil. Head was rebuilt 20K ago. $300 Motor will come without intake manifold, exhaust manifold & crank pulley. FSDE Intake 18K with flaps removed. $80 shipped in the U.S. Alternator 42K $60 shipped in the U.S. A/C Compressor 42K $75 shipped in the U.S. P/S Pump 42K SOLD Battery case/cover $30 shipped in the U.S. I'm open to all offers. If you have a problem with my prices you can send offer. All I can say is no.

It's a sad day, I'm posting this as the cars original owner. I was driving about 25 in town when the car lost power. I assumed it was the fuel pump as the original belt had been changed at 90K, but alas, the timing belt went. So, I have decided to part ways with my Protege5. The car is worth well over $500 in parts and, if you replace the belt, it should start right up. You could come away with a nice car that was very reliable for my family for very little out-of-pocket. The bad: Everything is good except the exhaust behind the cats. Because I was traveling at a low speed, the engine itself is probably still fine as well but in all honesty, it's hard to tell until a belt is put in it. The hatch has a small dent to the right of the...

SOLD! I bought this custom hard pipe kit from Korangatang in February of 2012. http://www.mazdas247.com/forum/showthread.php?123810831 The couplers and clamps are second to none, made by turbotechniques. If you've ever tried to piece together your own kit, you know how much good silicone couplers cost. The band clamps are not cheap either. I then purchased a new black HKS SSQV and had the flange welded in along with an IAT bung and sensor. The IAT gives a much more accurate reading to a standalone ECU than the stock location. However, neither need to be used and the pipes will work just fine with an otherwise stock car. The couplers are actually bright blue, but my Canon just died on me and my phone sucks. The pics from...

Title says it all. Also included is the bracket plate I made, some hardware if I can find it, and the inlet and outlet though it would be wise to fabricate a new outlet. It has some gunk built up in it from sitting in my garage for a while, but I will clean it out before the sale. 300 bucks OBO

Sold sold sold

SOLD! These are Axxis ULT pads. I've had Axxis ULT pads on my MSP since I bought it in 2006. They have incredible stopping power but don't need to warm up like a track pad so they are very popular for autocross. They also last forever. My first set lasted over 50k miles. However, when I replaced them in late 2011, I found out they were no longer in production. So when I found a dealer that still had them, I bought two sets. One set for street and one for the track. However, I only went to the track once, so these have 95% of their life left. I paid $41 + $12 shipping for these, so they are hardly worth selling, but can't bring myself just to pitch them. $20 including shipping to cont US, firm.

CX7 Genuine factory manual Genuine Mazda factory service/shop manual. In two heavy duty 3 ring binders. Bought new for $110. Now have a CX5 so I have no need. List Date: 11/24/2013 Location: Cape Coral, FL, United States For more info, click here to view the original listing: CX7 Genuine factory manual -------------------------------------- On Sale For: $18 obo (Local Pickup Only) -------------------------------------- Mobile friendly version: CX7 Genuine factory manual

SOLD! After how much work I put into this, it is really hard to sell, but it makes no sense to keep it on a car that I am selling. The valve cover was modified to improve airflow from the breather port to the crank case in order to reduce any positive pressure created by blow by under heavy periods of boost. AN fittings have also been added for perfect seals under any pressure. They are rated for something absurd, I believe 600psi. The kit came with the two catch cans pictured, but I added all the fittings and hoses which are shockingly expensive. I also made the bracket myself to mount the two cans in place of the stock airbox support. If you have a an aftermarket intake then you can just reuse the exact same position. The...

Selling my 505zoom intake manifold. It was 1 of two red ones. Egr block was rewelded by Rich for the previous owner. Comes with throttle body no IAC or tps and egr tube. And all fittings. Will post pics as soon as it stops raining here. 450 shipped inside the states

All parts are for mazdaspeed 6 vehicles or 2.3L and are priced to ship anywhere in the U.S. Paypal preferred...Pm me with serious inquires only. CP-E High pressure fuel pump....rebuilt and unused was in a sealed box but had to open for Mazda247 rules. Have all paper work w/HPFP needed to maintain lifetime guarantee. Like new reflectors. Mass airflow sensor for mazdaspeed 2.3L. Mazdaspeed 2.5" Turbo Inlet (Polished aluminum) with red fittings to connect to factory turbo and aftermarket intake. Sounds great! DNP v2 Exhaust Manifold- with black heat coating. I purchased used with some repair and have had no problems. If more photos needed Pm me. HPFP $325.00 Reflectors $10.00 Mass Airflow Sensor $45.00 Cold Pipe or Turbo...

Hello all, have a few things left from my turbo part out you all may be interested in. Prices are now w/ shipping! - Updated Sold List - • Turbo(s) • Oil/Water Lines • S,J and exhaust manifold gaskets • FORGE wastegate • FORGE ByPass Valve • Clutch kit • Exhaust manifold • SSAFC • JPipe • Stock Wastegates • FMIC Kit • WRX Injectors Everything is in great shape unless otherwise posted. parts are sold as-is since I never had the chance to test them. But were sold to me in working order. All Prices are OBO. If you dont like my price shoot me a PM and we can figure something out (1) MSP Heatshied, Sandblasted • $50 Shipped MSP S-Pipe, no cracks. • $50 Shipped dirty SMIC kit Stock MSP intercooler, plastic hoses and clamps all...

Here's a few pics of just a portion of what I'm cleaning out of my shop. Please pm me if you're looking for something that's not listed or pictured. All prices are plus shipping and paypal and OBO. I need this stuff gone soon or the dumpster gets it. Greddy Emanage with electronic boost controller, display, remote controller, and o2 voltage clamp - 250 MSP front calipers with used pads and rotors (rotors can use a turn) - 120 Custom upper intercooler pipe with gredddy type rs bov mounted - SOLD 1.8 coil setup with bracket and hardware (wires have less than 1k on them) - SOLD lower timing cover - 10 MSP heatshield - 40 j pipe heatshield - 5 upgraded 3/4 shift fork - 20 a/c tensioner bracket - 10 fuel lines, rail, injectors off my MSP...