Marketplace

DO NOT include shipping and handling, PM for full price quote PAYPAl Only, unless picked up cash only. Everything is sold as is! I can take and PM pics if requested. Stock MSP down pipe (s-pipe): $80 shipped inside the US vai USPS Flat rate w/ issuance. Its been sitting on my workbench for about 6 months. Its in good working condition. Has a bit of rust on surface. Studs appear to be in acceptable condition but one is missing a nut. but Id recommend to changing the hardware though. P5 Calipers: SOLD Protege5(5 speed) Radiator: SOLD Tubular stock replacement Turbo exhaust manifold: SOLD

17" Mazda Wheels & Tires (from 2010 Mazda5) 4 Stock Aluminum 17" Wheels and tires from 2010 Mazda5. Tires have 25K miles on them. One rim has approx 2" scuff on lip (not on seal). List Date: 12/16/2013 Location: Weymouth, MA, United States For more info, click here to view the original listing: 17" Mazda Wheels & Tires (from 2010 Mazda5) -------------------------------------- On Sale For: $450 (Local Pickup Only) --------------------------------------

turbo kit for 1.6L ZM - protege 3rd gen turbo kit for 1.6l ZM engine found in 3rd gen protege. includes: - '99 intake manifold (without EGR valve) - Turbo Specialties Turbo exhaust manifold - Brand new genuine Garrett GT2554R Turbo (same model found in Mazdaspeed Protege) - RX7 low impedance injectors (not a direct fit, will need an injector driver or some resistors installed inline) - intake and exhaust manifold gaskets - oil return hose and fitting - oil pan with oil return fitting installed (not pictured) - a few fittings required for oil and water lines to be installed aside from fuel management system and downpipe, this kit is nearly complete. shipping cost is a rough estimate from Montreal to Los Angeles.. would vary wildly...

Koni FSD Struts/MS3 Springs, MOOG F+R Endlinks, NGK TR6IX plugs, Street Unit RMM Hi All, I am selling some brand new parts and some parts are in used, but in great condition. This was for a 2005 Mazda 3, which should fit 2004 to 2009 also. Assembled set of Koni FSD with Mazdaspeed3 springs with 20k miles - $325 plus shipping Brand New NGK Iridium IX (TR6IX) spark plugs - $25 shipped Thanks! List Date: 6/8/2013 For more info, click here to view the original listing: Koni FSD Struts/MS3 Springs, MOOG F+R Endlinks, NGK TR6IX plugs, Street Unit RMM -------------------------------------- On Sale For: $106.32 + $20 Shipping --------------------------------------

FS: '07 mazda3 Tien gold lowering springs Up for sale is a set of Tien gold springs from a '07 mazda3 hatch. It should fit other years so please make sure before buying. I bought them for a Mazda5 but never put them on. Been sitting in storage while I was in Japan. Check my other items. List Date: 12/29/2013 Location: Laguna Hills, CA, United States For more info, click here to view the original listing: FS: '07 mazda3 Tien gold lowering springs -------------------------------------- On Sale For: $100 (Local Pickup Only) -------------------------------------- Mobile friendly version: FS: '07 mazda3 Tien gold lowering springs

I figured I would post this to see if anyone would be interested in Raceland coilovers if they made them for our cars. The process isn't that difficult. We just need anyone interested to email Raceland and simply let them know that we are interested. I know that the Hyundai Tiburon community did this same thing and Raceland was making coilovers for them in no time. If you are interested please email dclarke@racelandus.com Post on this thread after you have emailed them and I will add a list of everyone to the op. Emails sent to Raceland: 1) Majyk 2) tyman108 3) aleclahaie 4) kibl34

FS: Mazdaspeed air filter Mazdaspeed air filter element. Got it for a mazda 5 2.4L but never used. Has everything in picture. List Date: 12/29/2013 Location: Laguna Hills, CA, United States For more info, click here to view the original listing: FS: Mazdaspeed air filter -------------------------------------- On Sale For: $25 (Local Pickup Only) -------------------------------------- Mobile friendly version: FS: Mazdaspeed air filter

Selling my CDN MSP cluster Reads 199xxxkm on the odometer when pulled Came out of a canadian car Ships out of Hamilton Ontario $80 + shipping + paypal fees I accept paypal Either pm me or email direct at [removed]

MSP 2003 Unichip PNP Unichip PNP was purchased for $699.00. Car was wrecked before chip arrived. Comes with boost controller and 3 switches. Boost: stock or 10psi. Timing: stock or advanced. ECU reset. Pre mapped for 2003 MSP with intake and exhaust. Sold as is. Brand new in box. List Date: 1/13/2014 For more info, click here to view the original listing: MSP 2003 Unichip PNP -------------------------------------- On Sale For: $520.00 --------------------------------------

FS: Mazdaspeed Part Out (access port, intake, forge) First thing is a Cobb Accessport The screen still has the screen protector on it, which shows signs of wear. I just peeled it back to check and the actual screen is perfect. No imperfections. Very minimal wear, if any at all. Dongle is in good shape. Only used to flash a tune, do minor data logging and minor ECU adjustments. ***WAS uninstalled prior to trading the car in*** It is ready to go to a new home. Comes with accessport, cable, dongle, original install cd, box, and sick license plate frame so everyone knows you're COBB TUNED BRO.. Cobb price - $600, Asking $450 sold. Shipped. Received. Second thing is a Cobb SF intake - maybe used for 10k miles, tops. There is virtually no...

2006-07 Mazdaspeed6 Front Bumper Cover This bumper cover has some damage. The notable damage is a crack at the bottom, a few spots of paint that came off around the fog light housing, a mounting tab on the bottom was torn (REPAIRED with epoxy), and the little mounting ring where the top passenger edge of the cover mounts to the fender is torn (which I didn't notice when I was repairing other parts of the bumper or else I would have plastic welded it also). I plastic welded the crack from the back side and covered the damaged paint with Mazda touch up paint. It is still a little uneven at the crack, but it is strong. There are also some other assorted rock chips in it from daily driver status. This is obviously not a perfect...

I have a mp3 for sale as is or for parts car has bad motor email me for pics [removed]

I have a few amps and speakers finally have a free moment to list these... Everything has a price but is best offer, just make it worth while me running to drive to fedex! Please pm zip with offer. I ship with 2 day air (I get a shipping discount so 2 day is same as ground for me) I have two (2) stock subs and amps and speaker box decks for the MSP! (I took mine out and replaced with something else soon as I bought the car, and my buddy did the same. So he just gave it to me cause it wasn't worth him trying to sell) 2x MSP Kenwood Speaker Decks $50each (I do not have the brackets, sorry. But the +pos & -neg cables are still there) Decks <click> 2x Kenwood Subwoofers: KFC-WR/UM3, 8 ohms, 125 watts. (one is foam cone, one is rubber...

Hey everyone, So I have two items that I would like to get rid of because I no longer have a use for them. Willing to ship to United States only. Hopefully I meet all of the Rules and Guidelines for selling items. Trunk Cover: Reduced to $75) SOLD 2002 Protege5 Center Console Cup Holder WITHOUT BLACK BEZEL: Reduced to $15) SOLD Shipping is built into the prices listed above because they will be shipped via USPS. The cost of a box for the trunk cover is $12.50 and the estimated shipping cost is around $15.00. So the cost of shipping could be close to $30 which is in the price listed above. The cup holders estimated shipping cost is around $7, but I need to purchase/find a box for it so I may make less profit on that. How the...

(smash)SOLD!(smash) Going to miss her... _______________________________________________________________ For sale is my 2003 Laser Blue Mica Mazdaspeed Protege. Production #2733. Asking $6,000 obo! w/ 68,000 miles garage kept... Many pictures and videos down below! ALL PARTS LISTED BELOW WILL GO WITH THE CAR IF IT SELLS! I also have the stock front lip and stock 8" sub system! Gathering interest, serious only please!! Car is located in Houston, Texas 77044. Cash in hand for test drive. Whoever gets this car will be extremely pleased. I'm the original owner of this vehicle and will be very sad to see it go. Feel free to CALL or TEXT! 954-263-6848... If I do not answer, leave a voice mail, please! I will do my best to answer any...

FS: 2 Nitto NT-555's in stock wheel size 8/32nds tread For Sale: 2 barely used Nitto NT-555 tires. 8/32nds tread left on them basically new. Only had them on for 2 months before getting a new wheel/tire setup. List Date: 12/30/2013 For more info, click here to view the original listing: FS: 2 Nitto NT-555's in stock wheel size 8/32nds tread -------------------------------------- On Sale For: $159.27 + $30 Shipping -------------------------------------- Mobile friendly version: FS: 2 Nitto NT-555's in stock wheel size 8/32nds tread

FS: 2008 Mazda Speed 3 built. It is built with a lot of add-ons. Nice and clean and ready to go! - SOLD FS: 2008 Mazda Speed 3 built. It is built with a lot of add-ons. Nice and clean and ready to go! This car is beautiful and has been all blacked out. It is powered by a 2.3L Turbo Charged Four Cylinder with a six speed. It is creating around 25 lbs of boost and has no problem keeping you pinned to the seat. There have been a ton of installed upgrades including a stage 3 act clutch, B.R. racing suspension, GT Spec 4 stabilizer bar front and rear, dash hawk engine monitor, 18" Enkei wheels, front mount intercooler, Injen cold air intake, cobb turbo inlet pipe, turbosmart blow off valve, boost gauge, aftermarket front and rear...

Clean 2007 True Red Mazdaspeed 3 Clean 07 MS3 for sale. No dents, a few dings here and there and a clean interior. Has CP-E upgraded rear motor mount and CS intake with TIP. Car has 68.5K miles on it (mostly highway) and runs strong! Text or email for more info. 3232757402. Cash and local pick up only. Thanks! List Date: 1/3/2014 For more info, click here to view the original listing: Clean 2007 True Red Mazdaspeed 3 -------------------------------------- On Sale For: $12,500.00 --------------------------------------

FS: Mazdaspeed 3/6/CX-7 Valve Cover Up for sale is a good condition (albeit dirty) Mazdaspeed 3 valve cover. This valve cover came off my car, but it will fit any of the speed 3, speed 6, or cx-7 family. I purchased a used valve cover a few months ago and then got it powder coated, and then swapped it on to my car and then took this off to sale (almost like a core charge). I did this because I daily drive my car and couldn't afford the downtime. I highly recommend doing the same for any people that can't afford the down time. If you want to get yours painted or powder coated, or just want an extra valve cover, this will be perfect for you. Extremely hard to find! Located in Roanoke, VA and need this gone as soon as possible! $140...

FS: OEM Mazda2 springs, shocks, muffler/exhaust Mazda2 OEM shocks/ springs/ muffler/ and exhaust pipes. pm me for details or questions. Didn't list a price because I'm not sure if I can sell all in bulk to save on shipping or individually. PM me if interested. Looking for $120 for shocks and springs together $100 for full exhaust ( muffler and cat back pipe) includes tip OBO ONLY BUY NOW IF WE HAVE DISCUSSED SHIPPING AND FINAL PRICE List Date: 10/18/2013 For more info, click here to view the original listing: FS: OEM Mazda2 springs, shocks, muffler/exhaust -------------------------------------- On Sale For: $200 --------------------------------------