Marketplace

MSP parts car (rust, all mechanics worked, not blown) Final Update on this Thread: Engine rebuild complete on my main car, the parts car is up for grabs and some stuff has now been removed. I'm not willing to part this out extensively cause frankly i don't have the time, and the most desireable parts I might as well keep as spares. However if someone wants the entire car as is for $500 (needs to be trailered), it's yours. Entire turbo kit still on the car, engine, transmission, axles, most of the interior, racing harts...etc... Thanks! Patrick original post:. I have a black mica MSP i picked up as a parts car and will be likely trying to part most of it out. Probably keeping the engine, trans and maybe ECU and couple other...

CX-5 tires set of four 225-55-19 (Denver) $20 Replaced these with winter tires and have a separate summer setup. Its 2 sets of 2 tires, with 50 and 75% of life left on them. Two are Toyo A23 with 6/32" tread. The other two are Antares Comfort A5 with 8/32" tread. I'll sell them all for $20 just because I don't have the space to store them and don't want to have to throw them away. Just need these out of the garage. Call or text 732-718-8241 Thanks, Matt

For sale are some parts off my 2016.5 CX5. First is the stock wheels and tires. Removed at 11k miles so still plenty of tread left on tires. Rims are in excellent shape with no curb damage. They are nitrogen filled and static Balanced ready to be bolted up and go. Asking 375 for all 4. Second is factory Rotors off the same vehicle. Did a brake upgrade but absolutely nothing wrong with these. Removed at 12k miles. Excellent if need to replace your worn out brakes and don't want to get cheaper auto parts store ones. Front and Rear available. Asking 125 for all 4. (Will ship) Call or Text 845-616-2274 Thanks Evan

I have been cleaning my garage and found these new unused items. Please check the part numbers posted to ensure proper fitment for other Mazda's. I purchased these for my Protege5. (2) Wheel Bearing Front/Rear BECK/ARNLEY Part Number: 051-4065 - Cost for both $40 plus shipping. (2) Duralast Wheel Bearing/Hub Assembly-Front Part Number: DL510003 - Cost for both $40 plus shipping.

I sold my MSP last year and have some old parts sitting around. Time to find them a new home. Buyer pays for shipping, best offer takes the parts. Selling them as is. Factory BPV (in good working order) ($25 shipped) Forge Blow off valve. ($75 shipped) Engine cover ($25) Heat shield ($25 Shipped) Uni-chip - This worked great on the car. I was getting a fuel cut and took it off the car. The fuel cut was from a cracked manifold, never re-installed it. ($275 shipped) stock waste gate (in good working order) (sold) spring upgrades for a forge waste gate (15 shipped) Stock s pipe (no cracks) (sold) upgraded J pipe (sold) Stock EGR valve (25 shipped) Factory intercooler kit (hot pipe, inter-cooler, and cold pipe) ($100 shipped) AEM dry...

Got rid of my '14 Mazda6 and don't want to just throw out a $200 car cover. Looking for somebody to pick it up near Charlotte, NC. $20 takes it. It's clean, no tears or stains or anything. Mainly used it for a 3 month period when I was in Germany and had to leave the car outside. text 630-276-6326 if you're interested. http://www.autoanything.com/car-covers/60A1012A0A0.aspx

Packed and ready to go. Fidanza Flywheel https://drive.google.com/file/d/0B0BhSjrDglLTZEZsWGpUdVFVWFU/view?usp=sharing $175 Shipped OBO

Hello everyone, like the title says I have a complete 2003 MPS that I'm parting out. I took the head off of it so that's not available. All interior pieces are in good shape. Has rally armor mud flaps as well. Racing Beat axle back exhaust as well. If you need anything, pm me and I will get back to you asap. I do have pictures so PM me and I will get you some.

Alloy Touring wheels pulled from my 2 a couple of years ago, in good shape. I live near San Bernardino Calif. Work near LAX, can drop them off anywhere in between. Sent from my SM-J700T using Tapatalk

AAC Wilwood SL-6 Big Brake Kit. 6-piston Wilwood calipers, Wilwood BP10 street pads, AAC custom brackets and rotor hats, rotors, and Goodridge stainless braided lines. This big brake kit was on my Protege5. 17inch wheels or higher will be needed to fit this BBK. You can use the link below to see if the kit will fit. http://www.aggressiveautoculture.com/resources/aac_resources_template_brakes.pdf Comes with a set of new BP20 street brake pads. Supposed to be quieter. (Price $300) Buyer must pay shipping. Good - BBK works perfectly and stops well. Comes with a extra set of brake pads. Bad - Rotors need to be replaced, shop used hammer without my knowledge at the time to remove rotors. They were worn anyway. Piston: 6 Piston Area...

Figured I would test the waters with this one. I have a Mazda 3 CS Catback for sale. It has been cut, but you can easily get it welded together and it wont affect quality or performance. Looking for $200 plus shipping https://www.dropbox.com/s/12xc1nq0gskeeew/20170507_201043.jpg?dl=0

Hello everybody; Selling a set of four Tokico Illumina Adjustable Struts, H&R Racing Springs, and KYB strut mounts. Had them on my MSP for about 5k miles, and decided to go with BC Coilovers; so now i'm selling these. The Illuminas are pretty scratched up from installation. One of the red setting indicators is missing but not a huge deal. Other wise function as they should. The H&R springs look brand new and also function as they should. The KYB strut mounts are pretty beat up. One of the four I had to cut the threading for the mounting bolt, so one of them is completely useless. The other three are in okay condition, however these three might need new mountiing bolts. Pricing is as follows: Illuminas ~~~~ $700 H&R Springs ~~~...

Selling the MX-3 after a few years of ownership. If you've got questions feel free to text/e-mail. Asking $2,500 or trade for running CJ Jeep. [link removed]

New 2017 Mazda CX-5 Touring OEM wheels and tires. I drove the car home from the dealership and removed them (I already had different wheels/tires waiting for it) the odometer shows 166 miles (see photo). Tires: Yokohama Geolander G91A 225/65/17 These sell for $200 each at TireRack (see my screenshot photo) Wheels: OEM Mazda, aluminum alloy with a gunmetal/charcoal grey color 17x7 with 45 offset 5 lug, 5x114.3 bolt pattern black center caps and chrome lug nuts $1150 obo. Local pickup in Orange County, CA.

Hi everyone, I just sold my 2017 CX3 and upgraded to a CX5, however I was able to keep my CX3 GPS SD Chip and my CX5 came with one. If anyone is interested in purchasing please email [removed] and we can arrange to meet. I'm asking $400 or best offer! Cheers,

Sold

I wound up picking up a set of OBX headers, I dont need these anymore. They are brand new and never even taken out of the plastic. I bought the header about 2 1/2 months back. No idea what fitment is like. If they fit awesome, if they dont fit, dont say I didnt mention it!!!

CX-5 Strut tower brace SOLD! Sold the car, Best offer plus shipping!

Sold my car so selling my goodies! Blue/blue James Barone Racing intake with K&N shield to keep heat away from the filter! All needed parts included! New price is $180 plus shipping for the filter kit alone. Selling for $100 plus actual shipping. See it mounted in my build thread here: https://www.mazdas247.com/forum/showthread.php?123854584-davesxx01-build-thread Any questions? Fire away! Thanks!

Hello everyone. I'm parting out my 03 MSP. Everything is available besides the power train. All interior pieces in good shape. Have Rally armor mudflaps as well. If you have any questions please message me. EVERYTHING is an a best offer basis., tell me what you need and I'm sure we can work something out. Buyer pays shipping.