Marketplace

Hey guys, I have a stock 01 SEDAN mazda protege grille up for sale, not the mp3/msp/p5 grille, will fit those bumpers but have a slight gap. Good for sedans I have painted the emblems black but it chipped a little when i stored it away, some touch up paint will fix it right up or plasti dip it however you like. Other than that its in excellent shape. $60 + Shipping

Cobb AccessPORT Unit sold.

I had a local shop install a few Cobb parts into my stock 2007 Grand Touring MS 3. I am selling the stock parts, which are all used off my car with 90k highway miles on it in 5 years of owning it: Down pipe - $200 Air box - $50 Turbo Inlet Pipe - $30 Buyer responsible for shipping (I have the box packaging and will let you know the final price from the post office for standard shipping). Thanks!

FOR SALE. Autometer Cobalt Digital Gauges - Oil Temp, Oil Pres, Volt, DPIC - high-end gauges - not your typical run-of-the-mill cheapies - full digital display - fully electric units >> not mechanical gauges - includes all pressure and temperature sensors as well as extended wiring harness to reach Lotek gauge pod (professionally painted gloss black Lotek available for an extra $40) - Oil Pres, Oil Temp, and Volt gauges function perfectly and are in LIKE NEW condition - all readings are very accurate - DPIC looks brand new, but has 1 LCD bar on one of the numbers that sometimes doesn't light up >> does not affect reading what-so-ever! Prices: Oil Temp, Oil Pres, Volt - $200 + shipping DPIC - $30 + shipping Photos: Lit up

FOR SALE. Simoniz Premium Indoor/Outdoor car cover - LIKE NEW - like new condition >> I ONLY used it twice indoors when I stored my car during the winter - super soft non-scratch material >> NEVER left a mark on my vehicle - triple layer construction - weather resistant - fully breathable - has rings for security cable Price: $75 OBO + shipping Photos:

LOOKING TO GET RID OF THESE ASKING 35 PLUS SHIPPING THESE ARE OEM DOOR MOLDINGS THAT CAME OFF MY MAZDA P5.

Up for sale are these H&R lowering springs for 2010+ Mazdaspeed3. My friend just gave them to me and i've had them for about 6 months. They don't fit the 07-09 correctly so i'm gonna sell them. They've never been installed, and the closest they've been out of the box was for the pictures. Price: 180 +shipping Sorry for the lack of posts i have, i just joined and haven't really been able to post around and say hi. Thanks for looking.

FS: 2011 Mazda 3 i Sport $13500 Price Reduction I am selling my lightly modded 2011 Mazda 3 i Sport. I just had a new addition to my family and 3 kids will not fit in a Mazda 3! I am the first owner and bought it new at Sutherlin Mazda in Georgia. The car has 22000 miles that were all commuting 100 miles to work daily. I am meticulous with my cars. My 3 has had full synthetic oil at every change. The following are the mods I have done: CS catback with racepipe Simota SRI MS3 rear sway MS3 springs JBR short shift plate Voodoo shift knob Razo pedals 6000k HIDs CS motor mount Keyless entry and alarm 20% ceramic tint I am in my 30s and do not race or drive my cars hard. I just mod because I enjoy working on cars. There is only one...

OEM MSP Racing Beat Springs - $50 Selling a set of used OEM Racing Beat springs off my 2003 Mazdaspeed Protege. Car had 180k miles when they were pulled off. Good condition. Selling for $50. Buyer pays for shipping.

really didn't want to do this but with to many other projects going on and with getting ready to enter grad school i dont have time to mess with it 3400 or reasonable offer 2003.5 MSP around 110k on the clock motor threw a rod one tire needs replaced, other needs a patch does have a bigger then slight ding on the driver side back pillar amp/speaker is gone in the rear and there is a stockish regular headunit can text me at 575-219-9725 if its not gone by may 12th im parting it if your worried about buying from some with a low post count here is my ebay feedback and on another forum i am one http://feedback.ebay.com/ws/eBayISAPI.dll?ViewFeedback2&userid=visual_toys&ftab=AllFeedback http://www.d-series.org/forums/itrader.php?u=21232

Hey guys, I recently picked up a Mazdaspeed 3 so I will not be needing any of these parts. Of course all prices are OBO but I feel like I have priced them competitively with the going rate for used parts. Thanks for looking. Subaru WRX Top feed 440cc injectors with new O-rings. SOLD Perrin Fuel Rail Purchased from member and never used. Not 100% but I don't think it has ever been used. Comes with all braided lines needed for installation SOLD Turbosmart Manual boost tee (Black) SOLD Stock turbo removed because of oil blowby No shaftplay but I am selling so someone might want to get a new center housing or whatnot Sold High quality silicon vacuum lines enough lines to replace ALL vacuum lines on the MSP. This isn't cheap stuff...

I have a complete 5 speed swap I have put together planning on putting it into my Protege5. I am now selling the car and have the whole swap available for sale. **EDIT I Sold The trans and will now sell all parts individually** ECU $50.00 Main Engine Harness (SOLD) Secondary Engine Harness $40.00 Driver and passenger axles with intermediate shaft $35.00 each Starter $35.00 Shifter assembly with all rods connected $40.00 Brake and clutch pedal assemblies $50.00 Clutch slave and master cylinder with all hydraulic lines $40.00 Any Engine Mount or bracket $25 each Flywheel I have 2 $25 each Used clutch assembly in excellent shape $25.00 I also have a stock FSDE intake manifold no throttle body or injectors $50 + shipping

Im selling my COBB ap because i sold my mazda, it is unmarried and I am asking for $475 obo. I need to sell it asap, i will pay for shipping. fastest way to get ahold of me is to email me at mini_sobe@yahoo.com thanks ps. at the moment i cant find anything else to go with it. I am looking for it.

Sold

For sale is my 2008.5 Crystal White Pearl Mica Mazdaspeed3 Grand Touring. Mileage: 60,XXX (I drive 8 miles round trip to work every day, so it goes up slightly) Paint/Body: 9/10 Interior: 9/10 Options: Came with every available option except navigation and HomeLink. Options include: Power windows Power door locks Power steering w/ tilt Alcantra seats with leather inserts Automatic HID headlights (you can raise and lower the beam height) LED taillights Rain sensing wipers ABS w/ traction control Tire pressure management system Auto dimming rear view mirror w/ digital compass Bose sound system w/ 6 Disk in-dash CD/MP3 player with Auxiliary jack (plug in your iPod/mp3 player!!) and satellite radio ready. About 90% of the mileage is all...

PRICES INCLUDE SHIPPING, U.S. OEM Intake with Fram filter (only used for 50 miles or so). No cracks swapped for a cold air intake. -$45 BPV-$15 CX racing hardpipe kit 2.5 In. diameter. Only used 3 or 4 pipes from this kit. What's shown is what's included. 2 straight pipes, 2 45 degree pipes, and 1 J bend pipe. Pipes shown haven't been used. The one outside the packaging has a few minor scratches. Comes with 7 brackets, 6 straight couplers, and one 45 coupler. -$50 Firm Local pickup is welcome, in the Chicagoland area, il etc (within reasonable distance.) MONEY RECEIVED FIRST TAKES THE ITEM, NO DIBS! Thank you Send me an offer the worst i can say is no. CONTACT ME BY EMAIL AT KSOCHA19@ATT.NET FASTEST AND MOST CONVIENT WAY IF YOUR...

ok, just pulled these from my MS6.. they are the ext. door trim pieces that are on the lower part of the doors on the MS6.. they are only sold pre-painted in the MS6 colors, so i dont think these were ever offered as a reg 6 option? im sure someone here will know.. so, if you want these on your six? your gonna need to drill some holes or use alot of double sided tape. not even sure if they contour to the 6 no idea? the good: these are OEM W/ mazda mfgr info on them.. so you know theyre not Ebay crap!!! and have been on my car since day one, so theyve have been waxed etc.. no scratches, no chips on the paint.. the ext is mint!! color code 29y.. the bad: one of the lower clips popped off upon removal, its pictured, its not an...

All sold, lock it up! Used AWR rear end links (3/MS3 for non-stock sway bar) - $80 Shipped OBO : SOLD Used Mazdaspeed rear camber arms - $150 Shipped OBO: SOLD Used Weapon R Engine Torque Damper (I didn't like the added NVH) - $50 Shipped : SOLD Used Weapon R Oil Catch Can (stuffed with copper wool material - worked great) - $50 Shipped : SOLD

Selling a few items that are sitting around in my garage. Items include shipping. Mp3 shift knob 15 shipped Headlights. Need to be buffed out/restored. One is missing the boot around the headlight. 60 shipped Na header. Not quite sure of brand. Easy to install, the hardest part was the egr tube. SOLD Last is a center console piece. In good condition. 25 shipped Found a gauge cluster. It has 163300 miles on it. reads in kmh. Its just an overlay piece. needs needs to be reset. It was about 7mph off when it was on my car. 40 shipped.

Well the title pretty much says it all. These are left over from my MS6 that I sold more than 8 months ago. Just looking to get rid of the last few parts. EDIT: Please do not paypal me less than the asking price with out us agreeing on the price first.... First up: Blockhead single 52mm gauge pod. Was on the car for about 5 months. In perfect condition. SOLD! Thank you! Cobb SRI/TIP with Cobb filter and AEM dry flow filter $250 (missing 2 hose clamps) This was originally for a MS3 but I used it on the MS6 with no problems. CP-e Tow Plate: This was on the car for about 2 months before I sold it. In perfect condition. SOLD! Thank you XcarLink Ipod intergration kit: This works great for the MS6! It charges your...