Marketplace

These tires were installed brand new on our car to pass safety when we bought it in late April meaning they are only two months old. We've since purchased 18" aftermarket rims and tires so these 17" tires have to go. I'll use the rims for winters. The only bad news is the wife ran over a nail a month into ownership and we had Mazda repair the tire. It's been perfect since with no air leakage. Here's a review of these tires from a quick google search: http://forums.evolutionm.net/toronto-lancer-club/556080-sailun-high-performance-all-season-tire-testing-event-feedback-review.html I think $350 is a fair price for almost new tires. PM me or email if you're interested. Turboeg2 at yahoo dot ca ...or willing to trade for winter...

Part number 0000-8Y-C07. I would prefer a local sale for a discount. This lip is in "as is" used condition with free shipping to the lower 48 states: $65

My total loss is your total gain. The following parts are for sale in as is used condition with free shipping to the lower 48 states: K&N drop in filter part number 33-2134: $25 Protege / Protege5 owner's manual: $11 2002 Protege5 sales brochure: $7 Roof rack delete strips for hatchbacks with a moonroof: $85 DG motorsports carbon fiber headlight covers part number 50-61-2048: $75 DGmotorsports carbon fiber mirror covers part number 50-61-1140: $75

Cullman, Alabama -garret turbo (12psi) -new Intercooler/piping -Cold Air intake -Pioneer Sterio -Brembo Brakes -Blow Off valve -Racing Beat Suspension -Pro Comp boost guage -Megan Racing exhaust *** Just put $1200 in motor, whole new head, valves, cams, head studs, and gaskets etc.. & New map sensor garage kept clean title 2.0L DOHC 16-valve 4-cylinder Turbocharger System Co-Engineered w/Callaway Cars featuring Garrett T25 ball-bearing turbocharger, high-performance factory air-to-air intercooler, and mazdaspeed logo Underhood insulator pad Drivetrain Front-wheel drive 5-speed manual overdrive transmission Heavy duty driveshafts Heavy duty clutch and pressure plate Torque Sensing Limited-Slip Differential - Tochigi Fuji...

Custom powdercoated black weapon r intake does not come with filter or couplers asking 40 shipped I also have a walbro 255 used fuel pump I could do for 40 shipped my paypal is [removed]

Hey everyone, I have a 2002 Mazda Protege5, It was my motha truckin gansta mobile, That was my love till it jumped timing. Some things have come up and I have to sell all my parts instead of doing a rebuild. Everything on and off the car must go. I have a lot of parts. You ask i might have it and or can find it. If you see something or can think of something you need that i do not name off, tell me and we can talk about price. Here are some pictures. Prices are o.b.o. and shipping is it buyers expense. I have two 2002-2003 Protege Hoods still in boxes asking 100 each obo + shipping. Brand new front bumper. 150obo+ shipping. Had it for less than a month before the motor went. Harness Bar 100obo+shipping. Fit perfectly and...

3" CPE filter is in full working order, cleaned and ready to ship. Fits Corksport, SURE, ect... It had a crack in the silicone which was repaired using RTV and ducttape, so it does not leak (which I have tested using two other filters and monitoring/logging fuel trims/MAF) It has a small bump, as seen in the picture, which does not affect the function of the filter. 15 shipped New Fujita 2.75" filter. This never needs oiling, and uses the dryflow technology - 25 shipped OEM NGK, stock heat range spark plugs, used for only 200 miles 40 shipped Product: NGK Laser Iridium Spark Plug OEM rear view mirror for 03-05 mazdas. It has a few small scratches from wear/tear 40 shipped **PM me if you are interested**

I have for sale a real greddy type s bov with original box. Bov is in perfect working condition just removed the middle spring, which is in the box, and retailed the setting bolt. Only thing it doesn't come with is vacuum line. $100 obo. Also have a 2.5" flange pipe for the greddy. It is cast. $25 Last i have a forge bpv that has never been opened and works perfect. $75 obo

selling a brand new never used passenger side headlight for a gen 1 sport model mazdaspeed 3. - $225 shipped

I dont know if we are allowed to post these so if not, you can delete it. I have no pics. Msp only has a few parts left I saw a driver side taillight, rear kenwood speakers, factory sub brackets in trunk all 4 doors were good and windows. Has rear seats in ok condition. List of gone: Motor and tranny, front and rear bumpers, msp door kick panel things, hood, pedals, front seats, shifter, knob, boot etc. I listed pretty much all the useful stuff it still has. P5 (auto) pretty much has everything still. Just no front bumper, fenders and headliner. Has sunroof glass, ski rack interior, tails gauge cluster, coil packs, stock intake tube, new master cylinder, stock header etc. This place us probably 30 miles from my house so I wont run...

sold

SOLD! '08 OEM Speed3 rims w/air pressure sending units and NEW UHP tires Sold

]Hypertech Programmer ....Unmarried and Uninstalled. Comes with everything EXCEPT CD (braindead Updated: $290 shipped Reason i am selling is i am slowly converting back to stock, it is unmarried.

got this for an exhaust im not running anymore, perfect to reduce volume and drone.. the price is shipped and OBO, my email/Paypal: Markspd6@gmail.com

HI I AM SELLING A MP3 INTAKE MANIFOLD HAVE IT ON ANOTHER POST FOR $110 + SHIPPING BUT I NEED THE MONEY SO I AM ASKING $70 + SHIPPING PLEASE FEEL FREE TO CONTACT ME WITH ANY QUESTIONS OR OFFERS THANKS

Hey everyone, I sold my MSP last week and I'm looking to sell off a few remaining things before I move half way across the country for a new job. I need to have everything on this post sold by Friday in the hopes of getting it in the mail before I begin my move on Sunday. I'll be moving to Oklahoma City, so if you are in OKC or Florida, Southern Alabama, Louisiana, East Texas or Oklahoma we might be able to work out meeting up during my drive. On to the parts. Kenwood KCA-iP500 - This is an ipod control unit for kenwood units. You can search the kenwood site to see if your radio is supported. I don't think it works with iphones, but I used it with my ipod video the whole time I had my MSP. Thing worked like a charm and allows...

I've had a change of plan and won't be able to use my forged setup so here it is: K1 Rods with Wiseco Pistons and ARP hardware, stock bore, 8.5:1 compression ratio, standard length rods - used for approximately 20k miles - $500 (Pending with money down to 719prottege) FS Block (with good crank) - $150 (Sold to Brewer) Freshly cleaned head - $150 Cams - $50 If you buy the block you can also have the windage tray and oil pan. Package deal for everything - $650 - If you buy it all you'll still need a head gasket, head studs or bolts, oil pump, water pump, valve cover, etc. The bearings in the bottom look new, but it might be worth replacing them since its easy to do now. The bottom end is assembled, but not torqued. I will ship at...

Hypertech tuner. Bought off a member from msf. Asking $250 FMIC is all CXRacing parts but it isn't the kit that CXRacing sells for the MS6. Included are (1) U pipe, (2) straight pipes, (2) 70*, (2) 90*, (2) 45*, bov flange, all couplers, and tbolt clamps. Core size is 27"x6"x2.5". Asking $400 Obo

Couldn't fit all of this content in my other for sale thread, so here we go, the next batch of parts on the market! SOLDSPC Adjustable Camber ArmsSOLD SOLDTri-Point Engineering Rear SwaybarSOLD Tri-Point Engineering Adjustable Rear Endlinks Only on the car for about 3-4 months, and will fit any 2004-2009 Mazda3/Speed3 swaybar (might work on second gens, you will want to confirm before buying). These things are beefy and will not break like stock parts, and are in perfect working order. Asking $90 shipped anywhere in the continental U.S.

SOLD. Mods please close!