Marketplace

Closed

Hey all, TLDR: I have a ton of P5 parts, leftover MSP sedan parts and a P5 parts car with a lot of stuff still on it that I would love for someone close-ish by to come pick up and take for cheap. This listing will be gone in 2 weeks, so grab your stuff while you can. After working to build the LC1776 project, I've come to a point where I need to thin out some of the excess parts I have filling up space in my garage (that is needed for another secret MS-related Mazda project...:devilish:), and parts that only fit the sedan models. Below is a list of the major parts I have that people may want, but keep in mind that there are a ton of other little parts that are in boxes, so there is a chance that if you can think of a part you need...

Mazda OEM Parts Brand new - never used or installed Wheel Locks - Full set of Mazda wheel locks, with all materials/instructions - $15 (plus shipping) Floor Mats - Fits 2017-2020 CX-5 - $25 (plus shipping) Navigation SD Card - Never taken out of package - $25 (plus shipping)

$245 Shipped to the Continental US (AK, HI, PR extra) 2007-2009 Mazdaspeed 3 MS3 Short Ram - SRI - Racing Suction Air Intake by HKS Used, Good condition. It was painted black at one time, which is the black you see, it flaked off over the years. What you see in the pictures is exactly what you get. This may work on a MS6, but I'm not sure, you'll have to research for please.

KB8A-51-3F0B & KB8A-51-3G0B OEM Mazda lights Positions: Right & Left ON LIFT GATE, W/O SIGNATURE ILLUMINATION This will fit 2017- 2019 Sport & Touring CX5's. It has the white LED reverse lights. OEM equipment in good condition. New they sell for $190.00 Asking $55.00 for the set.

Once upon a time I was having an electrical problem. I took it to the stealership who told me that I needed a new wiring harness and it wasn't going to be covered by my extended warranty. They wanted to charge me $2500 for the harness and $500 in labor. I made one heck of a scene and let every prospective customer know the worthlessness of the extended warranty. The service manager came over and told me that if I could find a harness myself they would install it for $300. I ran home and found one on "that auction site" and ordered it. While waiting for it to arrive I extracted my cranium from my rectum and troubleshot the problem. A few hours and one ten cent piece of wire later the problem was solved. Then the wiring harness...

Fit kit 1334 to mount a Thule roof rack on a 3 sedan. This kit works with Thule's current 480/480r towers. It won't work with the older 400XT towers. I own the latter and mistakenly bought this fit kit from a place that doesn't take returns, so I'm hoping someone here can use it. Box is beat up from shipping, but the kit itself is new/unused. Asking $75.

2003.5 Mazdaspeed Protege Titanium Grey with 124,000 miles. Rebuilt transmission due to cheap factory differential gear..common problem with the mazdaspeed proteges. Did a new clutch as well since everything was pulled apart..Spent $1,000 plus alone on that. Currently it’s not running the greatest due to a bad seal in the turbo. Does need motor mounts, brakes, haven’t really driven much in the last year since I purchased a new vehicle. Has rust in common protege areas around wheel wells and a repair/patch to the front bumper on drivers side. Also have a black 03 Mazdaspeed Protege that ran great before using it as a parts car. Was planning on swapping the turbo from it to put in Grey one, just ran out of interest/time. Titanium one...

Both are brand new: Pauter Rods - 800 +ship/fees Custom high compression pistons from Wiseco - 500 + ship/fees If you wanna text me, you can do so. I'll be a lot quicker to reply. 360-609-2811

I have a recent boost tube that I bought from corksport approx 6 months ago but I decided to go back to stock, not for my taste. Comes with new black clamp rings. Email me at hcheng85@gmail.com. 50$ without shipping / 70$ shipped or can be picked up around Pasadena California area.

For sale: Mazdaspeed protege parts that I had left over, they are for sale located in Tampa FL. Buyer pays shipping or if local, we can meet up.

I'd like to sell as a whole but will part out if necessary. Engine had the rod thrown threw the block and after 2 engine rebuids over the past 3 years I'm giving up. Clutch, water pump, oil pump, all belts, maf, coil packs and 8mm wires, turbo, pistons (if they're still good) have less than 7,000 miles on them. Engine rebuild was supposed to be forged but after looking at receipts it looks like they only put forged pistons. The car has a front mount intercooler with hard pipes and a greddy type rs vta bov. Exterior is probably a 6 out of 10 and interior is 9 out 10. Looking to get $2,000 as is.

Located in Truckee, CA. 30 min from Reno and 1.25 hours from Sacramento. Full details: https://reno.craigslist.org/cto/d/truckee-2020-mazda-cx-5-awd-preferred/7182929662.html

Hello Everyone I have a few part that i'm getting rid of. 1 JDM Exhaust ( JIC MAGIC) ($350) 2 JDM tail lights SOLD 3 K&N typhoon CAI (with I.D) SOLD 4 Cork sport front tower strut bar SOLD 5 Gt Spec Rear tower strut bar SOLD 6 RR racing under drive pulley ($100)

Like the title says I am gauging interest to see what the offers are like for my car that I am considering selling as whole, so no partouts! The car has a very long list of mods and the reason why I am selling is because it is shooting black smoke out the exhaust and I no longer have time to find out what the issue is since I am busy with buying a house, work, etc. The car would be sold as is. Some mods that are done to it is 3 inch exhaust all the way back, ssafc, custom 3 inch cold air intake, Mam manifold, 505 zoom intake manifold, front mount intercooler, mishimoto radiator, 505zoom adjustable cam gears, air diversion panel, gt2860rs, electronic greddy boost controller, greddy bov, fortune auto Coilovers, etc. As you can see lots of...

I am parting out a 2008 2.3l GT hatchback. Color code is 32s. Leather interior. No engine or trans but basically everything else. Let me know what you need. I have many listings on ebay and craigslist that have more information and pictures.

2010 Mazda5 Manual 5-speed - $4900 - 128k Miles - 2 owner Much of the following copy is obvious to Mazda enthusiasts. Thanks for checking out this listing. Among the most reliable and affordable enthusiast cars ever built with a sliding door. It was marketed as a minivan in the USA but it's more like a tall wagon, considering it's compact size. These are increasingly hard to find with a manual transmission. It has a smooth shifting 5-speed and a light, easy to modulate clutch. The steering is good with decent feedback and good weight. The engine has reasonable power and a good spread of torque. It loves to rev and doesn't mind spending time at higher rpm. It's fun to drive. The car has abundant cargo and passenger space for it's...

Selling a set of brand new OEM carpet floor mats for Mazda CX-5. Fits 2017-2020 (maybe older years as well) models and has both front and rear. Located in Nova Scotia. If you're interested make an offer and we can try and work something out.

2016 Mazda cx9 gt OEM 20 inches wheels and tires wheels are like new and front tires are 70% left and rear are 50% left. i am selling because I just got a new set of 22s. Local pick up in Pasadena, california $950 obo

We ship world wide. Please comment below with your parts requests. Thank you Jp