Marketplace

$5 Flat rate shipping via usps and international shipping welcomed Msp shift knob $65 Msp Ecu $75 Paypal is nathanmaleski@yahoo.com

Check out these parts. All prices are USD. All prices are OBO. Shipping is not included. Reply in the thread or PM me for shipping quotes. I will ship everything via CanadaPost/USPS since they are the cheapest. I can quote other carriers if needed. PAYPAL only for mail orders, cash for local pickup of course. Since I do not have a bunch of time to get quotes during work hours I will mostly respond evenings and weekends. PMs and posts will be responded to in the order which they are received. OEM Protege5 Air intake box, pipes & Silencers includes like new K&N re-useable Air filter ... $60 OEM Protege5 Gauge Surround (great for making a Dual Bezel gauge holder) ... $10 OEM Protege5 Rear Bumper Step (grey) ... SOLD OEM Protege5 Exhaust...

DEFI BF Egt, Boost Gauge, Link Controller I have for sale a Defi Boost Gauge, EGT and D Link Meter. I had these on my 2007 MS3 which I traded in 3 years ago. Unfortunately, when I traded my car in I did not have time to retrieve all the wiring, so this is all I have. You can get the wiring from Defi for about $250. These gauges still work. Thanks. List Date: 5/7/2013 For more info, click here to view the original listing: DEFI BF Egt, Boost Gauge, Link Controller -------------------------------------- On Sale For: $105.79 + $10 Shipping --------------------------------------

SOLD please close

Protege5 5speed 165k clean title tein s techs 06 civic si rims yellow fogs Catback exhaust hids (6000k) new radio/ speakers short shifter new shift boot weighted shift knob new brakes cross drilled and slotted intake new spark plugs new tires new radiator, belts, thermostat, end links, axles, tie rods... always used royal purple for motor and tranny. overall good car New tires Con: Windshield crack for sale or trade [removed] michael

need this stuff gone. GT-Spec Vbrace - 300 (SOLD) GT-Spec lower tie bar - 100 (SOLD) Forge wastegate actuator - 80 rear sub trunk brackets - 50 rear sub with JBL sub in place (no amp) - 100 (local preferred) 03 and p5 factory fog deletes - 40 (SOLD) ACC bumper brackets - 50 (SOLD) stock wastegate actuator - 20 and heat shield - 20 (SOLD) AEM dry flow filter 3 inch - 30 wrinkle red valve cover - 100 oil cap - 20 (SOLD) DG front lip painted black mica - 250 (SOLD) a pillar 3 gauge pod - 40 air division panel - 80 (SOLD) DG grille painted black mica - 200 Dave B gauge rings - 80 (SOLD) light up door sil panels - 60 cusco oil catch can - 40 steedspeed mani - 500 02 p5 wheels painted gold, will need new tires -...

Lets try this again, Clutch and flywheel are new. ECU is refurbished. Here we have a Spec stage 1 clutch and Spec 7lb. flywheel. All parts came from protegegarage.com. Id LIKE 225 for the clutch. 350 for the flywheel. 250 for the ECU. Prices are negotiable I just want the parts sold because sooner i sell these the sooner I get my car on the road and back to work.

cusco front tie bar powdercoated wet black, looks rad. Never before installed funds directed towards other parts now PRICE CHANGE $135 shipped

Powdercoated Valve Cover and Spark Plug cover Valve cover powder coated & spark plug cover. Includes studs to mount the spark plug cover. 845-559-7181, texting is the best way to contact me quickly! List Date: 4/29/2013 For more info, click here to view the original listing: Powdercoated Valve Cover and Spark Plug cover -------------------------------------- On Sale For: $200 + $40 Shipping --------------------------------------

Traded my Mazdaspeed in last month. Selling my unmarried accessport for $425 shipped! Boxed and ready to go.

Hey Guys! For sale is my 2003.5 mazdaspeed protege. The interior is about a 9/10 and the exterior is about a 9.5/10. It has a 2.0 turbocharged engine and is front wheel drive.This car is very clean probably one of the cleanest mazdaspeed protege's out there. It runs strong and has amazing handling, sway bars feel amazing. It currently has 120xxx on the motor but the head was previously rebuilt, ~60k on the turbo, and has a new clutch that has 2000 miles on it and feels amazing! I found a car that I want so I dropped the price need it gone asap. Looking to get about $6,200 obo. If your interested pm me. The car is in amazing shape and has many new parts on it and they weren't cheap (see below). This car has a lot of money invested, here...

I have a rear lip that needs to be fixed. Very simple to do. Comes with all hardware. Looking for $70 plus shipping. Better pics tomorrow with more light.

Sold the MSP last week and still have a few things left over. Need the stuff gone. Make a good offer and it's yours. -DG Motorsports real CF radio bezel surround trim - $75 shipped These will look like this - (hopefully ForceFed will not mind using his pic as an example) http://www.msprotege.com/members/ForceFed/CF%20Radio%20Bezel/Protege%20CF%20Trimmed%20RadioBezel%20004.1.JPG -Full s-pipe back MSP exhaust with 03.5 muffler - (j-midpipe, catback + muffler) would obviously prefer local pickup. $75 for muffler, $75 for cats, $50 for catback -Heater core for 2.0 Protege - $40 shipped -Stock IC piping and intake piping for MSP (including the Callaway elbow) -MSP driver side tail light (has small crack) -$10+shipping -Spacers - 2...

Got these from a friend, knowing they needed some work, but they need a complete rebuild to be 100%. The ride was really really stiff and not what i was looking for. The endlink connectors are bent on one of the fronts also as you can see from the past owner. I was gonna get them rebuilt, but looking at a new set of other brand coilovers instead. Looking to trade them for MSP parts or something or out right sale plus shipping. Just passing the good deal on to anyone else, they would be good for parts or good for someone wanting to get them rebuilt for a track car.. way to stiff for daily driving. I had them on for 24 hours, and realized im not about that life...haha. Interested in intake parts for a msp or exhaust. Make offers...

intake manifold for sale ported and polished, vtcs removed ceramic coated: polished finish $200 + shipping, obo

Hey guys, I havent been on here in a while as i've sold my mazdaspeed a while back. I was cleaning out my garage and found my old mazdaspeed intake manifold that i replaced for a 626 intake manifold. I'm really not sure what they are worth and will take offers on it. Manifold is located in Moose Jaw, Saskatchewan. PM for pics and details.

Steedspeed t3 manifold with external wastegate v-band flange. Only thing wrong with it (see 3rd pic) is the car it was on was crashed in the front and the little divider plate inside the wastegate flange shifted a little but it has no effect on function. $450 shipped to the lower 48.

Hi, today for sale i have an OBX Tubular T3/T4 manifold (new) External wastegate attached to the manifold,steel braided Oil feed line, oil return,and a new tapped fr oil return oil pan! basically all you need is a turbo and downpipe (well, and intercooler, tune, etc.) ! everything is new and im looking to sell as a package. great for someone wanting to turbo their na protege or p5! Untitled by cmezz331, on Flickr Untitled by cmezz331, on Flickr Untitled by cmezz331, on Flickr Untitled by cmezz331, on Flickr looking for $250! shipped, as its kind of big and bulky. manifold is 200 new, oilpan is 100 without oil return , ewg,is about 100, then oil return, oil feed, gaskets, etc. everytrhing is BRAND NEW NEVER USED! if you have...

JVC KW NT50 HDT Navigation/DVD w/ MAZDA 3 kit! Navi, dvd player, bluetooth for phone. Worked very well for me and had better than stock deck quality. I'll miss it. List Date: 4/29/2013 For more info, click here to view the original listing: JVC KW NT50 HDT Navigation/DVD w/ MAZDA 3 kit! -------------------------------------- On Sale For: $343.42 + $25 Shipping --------------------------------------

Price Lowered! Details: asking 5,500 OBO: 95,xxx miles, has aftermarket front mount and 2.5 inch piping, tein lowering springs, and a jvc headunit. Tires and breaks have all been recently replaced. Please either Pm me or preferably call/text at [removed] --Anthony Pictures: