Marketplace

steering wheel ,air bag w/ moldings in between the front and rear doors 150.00 plus shipping muffler 100.00 PLUS SHIPPING* fuel rail with 4 injectors 175.00 shipped clock spring with switches 100.00 shipped

Car was totaled on 10/13/11 FS: Mazdaspeed Protege for sale or parts - 19K miles Asking price is $3,500 But I wont lower it too much. I have a 2003 Mazdaspeed Protege. The car has 19K miles. The engine and transmission run perfect. I fixed the little transmission leak coming from the shift rod, I have documents for that. All stock, no modifications. The vehicle does have a salvaged title due to a front-end collisional back in 2003 The car has been fixed and painted, but like all cars it does have little dents and scratches. The paint does have some over spray on the rear driver door/quarter panel, but I included a picture for the visual aspect. Its not that bad at all. I never registered it as non-op. So...

2007 Mazda 5, Sport Manual, 35000 miles for sale: 2007 Mazda 5, sport trim, manual 5 speeds, dark grey. VIN JM1CR293170149362. One owner, kept in the garage, only neighborhood driving, low mileage (34,700), car is in good conditions (a few scratches on the bumper). I could send you the file with Auto check report. I only sell because I am moving out of the country. Will only deal locally (Houston, TX) in person. Contact e-mail: begemot239@hotmail.com Phone; (1) 281 627 6446 List Date: 5/30/2013 For more info, click here to view the original listing: 2007 Mazda 5, Sport Manual, 35000 miles -------------------------------------- On Sale For: $10500 + $0 Shipping --------------------------------------

Selling my stock exhaust manifold and heatshield because i upgraded to a thunder manifold and dont need this anymore. The manifold had 2 small cracks that didnt go through all the way and they have been welded, other than that nothing wrong with the manifold at all. Asking $100 shipped or best offer

Mazdaspeed badge is BRAND NEW, just got it in the mail today, but i ended up ordering two by accident. (Has 3M sticky tape on opposite side) Protege was taken off my MSP, still in excellent condition there's no scratches or anything. Still has the two knubs on the back to stick into the trunk... Turbo badge was bought off protegegarage from the previous owner, i took it off the day i bought it... never was big on badges. $25/Mazdaspeed shipped $15/Protege shipped $15/Turbo shipped $40/ALL shipped

Selling my spare MS3 Sport passenger headlight- never used- asking $150+shipping Price Lowered! asking $100 plus shipping

Mazdaspeed Protege MSP UniChip Uni-Chip Mke offer? Used but excellent working condition unichip for mazdaspeed protege. I have the instructions and they are included. Sells for $700 new. Went to stand alone. List Date: 5/28/2013 For more info, click here to view the original listing: Mazdaspeed Protege MSP UniChip Uni-Chip Mke offer? -------------------------------------- This item is no longer available. --------------------------------------

Koni FSD with MS3 springs Hi All, Selling an assembled set of Koni FSD with Mazdaspeed3 springs with 20k miles - $380 plus shipping. Thanks! List Date: 5/28/2013

Racing Beat rear swaybar, endlinks, Koni FSD/MS3 Springs, Street Unit RMM Hi All, I am selling some brand new parts and some parts are in used, but in great condition. This was for a 2005 Mazda 3, which should fit 2004 to 2009 also. Assembled set of Koni FSD with Mazdaspeed3 springs with 20k miles - $380 plus shipping Racing Beat rear swaybar with Brand New Energy Suspension bushings - Sold Brand New MOOG Front (K80235) and rear (K80867) endlinks - $50 for front and $50 for rear shipped. Brand New NGK Iridium IX (TR6IX) spark plugs - $25 shipped Street Unit 62A Rear motor mount - $70 shipped My reputation as a seller is excellent on zilvia.net, amongst other forums. PM me if interested. Thanks! List Date: 5/28/2013...

I have a stock differential and stock cam gears for sale. Both came out of an 01 MP3. Diff has around 80,000 miles on it, unsure on cam gears. $25 shipped for cam gears, $75 shipped for diff. Included shipping is for lower 48 in US only. I can calculate shipping for other places.

Parts pulled at 20k Miles All prices are BEFORE SHIPPING. Shipping will be negotiated via pm, phone, or email. OEM MS6 Suspension, great condition. $200 OEM MS6 1st Cat/DP. pulled apart but all pieces included $100 OEM MS6 2nd Cat $100 OEM Intercooler Shroud $25 OEM MS6 Trunk Trim Piece. Trunk Latch Piece. $30 OEM Turbo Inlet Pipe, One Broken Clip $25 OEM MS6 RMM $25 H&R Spanner Wrenches, Off Street Performance Coilovers $10 CP-e SRI to OEM TIP Coupler $5 18 Lugnuts & Key, Oil Cap, Misc Swaybar parts. Make me an offer

steedspeed ported & polished im Hello everybody have some parts for sale steedspeed v2 manifold it will need new egr tube and one stud to be drilled out - $500 + shipping Fully ported & polished intake manifold signature sound satin black coating and polishing - $250 + shipping Oem rear racing beat sway bar bushing + mounting brackets in good condition - $20 +shipping 03 mazdaspeed protege oem fog lights including mounting brackets plus harness and interior button - $100 shipped Nology wires w/ the mounting bracket with grounding wire coil packs not included - $80 shipped (i need stock set up for my second speed) AEM Intake with carb sticker - $50 shipped plus urs stock MSP OEM left taillight no cracks - $50 shipped Forge...

06 Mazda Speed6 Dual Mass Flywheel Have a flywheel that came out of my 06 MS6 with right about 70k on it. Clutch went bad and ended up going with a different flywheel and clutch combo. Not really sure what these are worth or how much they go for. So just throw me some offers. Just a big heavy paper weight as of now. Just want it gone. List Date: 5/25/2013 For more info, click here to view the original listing: 06 Mazda Speed6 Dual Mass Flywheel -------------------------------------- On Sale For: $1 + $30 Shipping --------------------------------------

evolv just replied me that he will make more clunk fix if theres enough interest. so question is am i the only one thats still looking for clunk fix kit?(rolleyes) i think last group buy sold like 50 or 60 brackets , most ppl on this forum already got their fix right ? maybe i should just make a DIY bracket or buy used? btw, if anyones interested, please send a msg to karl at autoxracing.com (you can log in with facebook and leave a msg /email if you want) he told me, if he get enough interest, he would send us an email notice

Racing Beat rear sway bar,Msp cluster"for parts" Garrett T28 turbo msp water neck Joeyp fuel cut defense $50 Garrett T28 came from a stock nissan s14 solid shaft, no leaks" a few modifications and you can put this on a protege" $250 shipped Cont U.S MSP Racing beat rear sway bar "RED" with factory mounts and new updated racing beat bushings also 2 endlinks included" moog" and 4 mounting bolts $140 shipped cont US SoLd *MSP 2003.5 Gauge cluster "for parts" 124,000 miles Speedometer needle doesnt work and odometer stopped working too plastic cover broken as well 25$ shipped cont US Msp water neck has some corrosion around the edges but good solid metal part works great 18$ shipped cont U.S Message me if interested I do paypal...

UPDATE: Work has officially been started, about half way done. Those who want the 8mm spacers, a little more work is involved, so these will take a little longer. Other than that, 3mm and 5mm spacers should be ready to go by the end of next week (Dec 31). Since I know some people have been looking for wheel spacers lately, I took it upon myself to do some investigating and some research. I have purchased an old set of Turfburn's hub-centric spacers to compare to. All of my spacers will be made to fit vehicles with a 67.1mm bore and a 5X114.3 bolt pattern. These will fit: Protege, Mazda3, Mazda6, and possibly other vehicles. They will be made of aluminum and made to order. Here are the details: 3mm (1/8") spacers: $25 a pair...

I live in Central Nj and the car is at my moms house right now. Well had this car since 04 and with 76k miles on it now, love my mazda but its time to see her go. Selling cause of bills and alot of other things need to be paid off right now.Got alot of my hard work into this car.BC Coils only have less then 2k miles on them. Brakes and rotors maybe about 4k ago, Washed and waxed the car every week when I could. Fluids flushed not to long ago, Motul oil every 4k miles. I babied the crap out of this car. I have winter steelies/tires just only one winter I put them on, really good almost new thread left. Dont have summer rims or tires for it but extra parts I have that will come with the car. I have more stock parts, hydrodipped interior...

2014 Mazda CX-5 Wheelset with Tires Want to sell my factory fresh 19s. Local or close pickup preferred but will ship if necessary. Tires have 100miles and counting on them, practically brand new. Make me an offer. Brand: Factory, OEMFinish: Silver Front: 19x7.0 +50mm Rear: 19x7.0 +50mm Tires: Toyo A25 225/55/VR19 List Date: 5/21/2013 For more info, click here to view the original listing: 2014 Mazda CX-5 Wheelset with Tires -------------------------------------- On Sale For: $1000 + $195 Shipping --------------------------------------

best offer gets it. Thanks :)

. . . . . .both items are sold . . .