Marketplace

Hey guys, I got a 2001 Protege with the 2.0 FS-DE and I am looking for mods to do. One big one is Turbo or not. I heard its a pain to put one on, but is it really worth putting one on? I'm looking for about 190- 200 hp. What do you think?

Satin White Vinyl Wrap This is is 3M 1080 S10 Scotchprint Satin White Vinyl Wrap. 5ft x 55ft (60in x 660in) (275 Sq/ft). Never touched, I only opened the box to provide signage. Great color, it has a matte look without being chalky. I paid $520 for the roll so I'm asking $475, but again I am negotiable. List Date: 6/18/2013 For more info, click here to view the original listing: Satin White Vinyl Wrap -------------------------------------- On Sale For: $400 + $0 Shipping --------------------------------------

I currently have an engine-less Sunlight Silver MSP, and was considering selling it. I was just curious what I could get out of it if I sold.

SU Polished TMIC SU Polished TMIC, with shroud and bolts. 350 shipped PM if interested My feedback reviews: http://forum.***************/itrader.php?u=78785 List Date: 6/2/2013 For more info, click here to view the original listing: SU Polished TMIC -------------------------------------- Item Has Been Sold. --------------------------------------

As the title says left over from my msp. Prices do not include shipping. Shipping is not available for large items ie bumper, trunk ect. But will ship other items. MSP Carpet $45 Truck $45 Spoiler $75 Doors $70 each Rear bumper Msp rear lip Can see the bumper under the trunk Trunk carpet w/board $45

Selling a partial turbo kit that I previously bought from a member. I never installed it I have just had it all packaged up and ready to install but have since changed plans as far as my car goes. This is for a 1st gen Mazda 3, it is a F2 Kit that has been upgraded. Asking price is $825 OBO + shipping This is not a complete kit (Please see below) Included: Complete hot % cold piping, including intercooler & Turbosmart BPV. Turbo Manifold ceramic coated (T25 flange) Down Pipe (V-Band) ceramic coated and wrapped w/ heat shielding Set of over sized injectors 39lb Matched Ford XFC/PCS Piggyback computer w/ harness (including 10ft serial cable) Master Power turbo (Waste gate is stuck shut) What you need: Turbo (or repair the one...

so two weeks ago i got into a bad accident where i ended upside down with the MSP. Now its sitting in the driveway and been taking parts out on my spare time. All items are in good condition and the price includes shipping. PM'D any questions or concerns. if your looking for something specific let me know. I might be in good condition but no promises..lol. IF you want more pics let me know. 1.Cup holder- good condition some scratches and wear but nothing major- 15 shipped 2.AC control unit- good condition hardly used it since i didnt have a AC 10 shipped 3.A-Pillars-some scratches but nothing major 15 shipped 11.Gauge Cluster surround plastic- 10 shipped 13.Steering column plastic surround- all three 10 shipped 14.Radiator...

MSP Part Out! All offers considered NOW ENTERTAINING ALL BEST OFFERS. Shipping has been anywhere from $15-$33. Please consider a median shipping price when considering your offer. Thanks everybody. NEW! AWR Rear Motor Mount - $60 shipped Vibrant Black Distribution Block w/ 4 nipples (all plugs still attached as well), -SOLD BUNDLE ONLY: AEM Wideband guage and Split Second AFC v2 (data logging), transfer cable, all instruction paperwork and R4 software disk. unit fits PERFECTLY under cup holder, and maintains easy access to link up to pc. . -SOLD. center console bezel - SOLD Dual gauge pod, under radio. no cracks, good shape, may need to be sanded and repainted. SOLD Samco Sport silicon turbo hot pipe (connects turbo to sidemount...

07 MS3 wheels w/ tires for sale $400obo 07 MS3 wheels w/ bridgestone potenza tires good for a couple of hundred miles. No cracks or bends. $400 or best offer, trying to sell quick, and locally. Text me for faster response 619-961-9595 thanks! List Date: 5/22/2013 For more info, click here to view the original listing: 07 MS3 wheels w/ tires for sale $400obo -------------------------------------- On Sale For: $400 + $0 Shipping --------------------------------------

2003 Mazda MX-5, 107k miles, excellent condition, 5 speed, $7500 Wow! You will not believe how great this car looks, runs, and drives. Really. This is the first and only convertible you need to see. The canvas on the soft top is perfect, the back window isn't even a little frayed. The interior is amazing. You will have trouble believing the number of miles, because it looks and acts like a new car, despite having just over 100k miles. This lively sports car has a short-throw 5 speed transmission, immaculate alloy wheels, almost new tires, and the cleanest motor I have ever seen. If you see it you will be impressed, and if you drive it you will fall in love. List Date: 6/5/2013 For more info, click here to view the original...

I have random parts that were sitting in my garage and I wanted to clean it out. All the parts were in perfect working order when I started my build and if there is an issue just let me know. I don't know the going rate for parts but I have seen most of these parts sell for higher prices. I'm not trying to get rich off these parts just some more part money for my build. All prices are OBO so don't be shy to PM me. EDIT: All shipped prices are only taking US customers into consideration, outside the US will be extra for shipping. Sorry for the inconvenience. Protege 5 Exhaust Manifold: $20 plus shipping (if you want O2 sensor just add another $10) Impact foam (behind front bumper): Name your price plus shipping Fogs with bracket...

Stock MS3 Motor Mounts, BPV, Boost Tubes Fore Sale I have some stock MS3 Parts. All of these items were taken off of the car at about 7k miles. TMM $50 shipped PMM $50 shipped RMM: $40 shipped BPV $25 shipped Boost Tubes $20 Shipped Make me an offer! List Date: 6/5/2013 For more info, click here to view the original listing: Stock MS3 Motor Mounts, BPV, Boost Tubes -------------------------------------- On Sale For: $52.63 + $0 Shipping --------------------------------------

ALL prices are WITHOUT shipping included. PM me your zip and I can figure out the cost for you. I've got a 626 intake manifold that I was planning on putting on the MSP several years ago. It should be cleaned and prepped prior to install obviously. As you can see, some of the accessories are still attached but there is no throttle body included. $45 SOLD I have 2 SETS of window moldings that I was going to sand down and repaint since I was so sick of the pitting on my MSP. I had done a previous set using this method and they came out really good. $10 per set ONE SET SOLD Protege ES spoiler. I was going to have this painted titanium and put it on my MSP to get a more subtle look. Includes LED 3rd brake light pigtail. $20

Sold>.

Greddy Ti-C exhaust and more Haven't had time to repost new pics but will try and get some new ones sometime this week. Anyways the exhaust is still up for grabs. I can of course provide pictures faster through text, 209-914-3534. Full 3 inch piping, burnt tips. absolutely nothing wrong with it. has bolts and gaskets needed to install. it's ready for a new owner! it's just sitting in the garage collecting dust since the ms3 is gone. Asking 480 obo. Thanks I accept paypal. Just PM for further details Stock BOV $20 Chrome Fuel Door $25 Stock Inlet $20 4-point Racing Harness $10 List Date: 3/4/2013 For more info, click here to view the original listing: Greddy Ti-C exhaust and more --------------------------------------...

2-12" slim Fan = $30 SOLD Blue vacuum manifold = $25 SOLD Exhaust manifold gaskets (All together) = $25 shipped Mazdaspeed Ecu (Flashed by dealer) = $135 SOLD Protege 5 =OEM shifter = $45 Mazdaspeed Door Sill (It has a small dent on the driver side) = $60 SOLD Guage pod = $30 SOLD EGR Valve (clean in good working condition) = $35 shipped CR3 Plate New = $50 SOLD Guage Rings = $50 SOLD MSP manifold heat shield = $35 SOLD Glowshift digital boost guage = $40 SOLD Sorry I can only ship within US.... I accept paypal....rollyng2001 at yahoo.com [/URL] [/URL]

i got a new set of xxr 002 wheels for sale for 400 i need gone by friday i try to put a pic but i couldnt for some wierd reason

CX7 *BRAND NEW* Powerslot Slotted rotors (all 4) CX7 *BRAND NEW* Still in box never used all 4 included POWERSLOT rotors 126.45077SR & 126.45077SL 126.45076SR & 126.45076SL NOTE: SHIPPING WIL BE ALOT FOR THESE ITEMS, I WILL TRY TO EAT AS MUCH OF THE SHIPPING COST AS POSSIBLE TO MAKE A SELL!! buyer will pay shipping (shipping may vary from state to state) Paypal as gift or add 3% List Date: 4/4/2013 For more info, click here to view the original listing: CX7 *BRAND NEW* Powerslot Slotted rotors (all 4) -------------------------------------- On Sale For: $300 + $0 Shipping Retails for: $340 | You Save $40 | That's a 11% Discount! --------------------------------------

Haltech SP 500 pre-wired - SOLD Garrett 2860RS .86 turbo - SOLD GTX 5th gear .71 never installed - SOLD 505 zoom intake manifold - SOLD MZ6 front brake kit (11.8") - SOLD OEM MAF - SOLD 440cc wrx injectors - SOLD JoeP MBC - SOLD JoeP FCD - SOLD Hub Assembly RF - SOLD WeaponR Overflow tank - SOLD Technafit SS brake lines (rear only) brand new - $30 All prices include shipping to lower 48 and im flexible, shoot me an offer.

2005 Shinka RX-8 listing the shinka for a friend. sad to see it go... up for sale is a 2005 mazda RX-8 Shinka.... -short bio- car was purchased in richmond virginia in 2005.These cars did not come with the spoiler from the factory so one was added and color matched at the dealer at time of purchase. its been garage kept since time of purchase, its a little dusty right now from the garage door going up and down all the time. new pics will be added this weekend after it gets a bath and some sun/drive time. :) -Specs- 2005 Shinka trim first generation se3p !7,000 miles black cherry paint parchment leather interior 8 point power seats suicide rear doors on both sides chrome 18 inch wheels blistein suspension uerothane foam injected cross...