Oil Return Line Question!!

[Maz2001MP]

I have been having trouble using stainless braided lines for my return line out of the MSP turbo.

My bung is welded on the oil pan and the way my setup is, I can't currently use braided hose (it is not flexible enough, etc.)

I picked up some internally braided heater hose. My question is will this hose

1) Be oil resistant enough for the return line

2) Can sustain the oil temperatures coming out of the turbo??

If not, can I use this as a temporary fix until I get some good oil resistant internally braided high heat hose??

Thanks!!

 

[bumpin_p5]

I am not really sure what you are looking for but I used the long blue hose in the picture below for mine. I couldn't even tell you what it is. You can pm mryellermp5 and ask him. He included it with the turbo kit that I bought from him. The hose has held up fine.

 

[Maz2001MP]

I am not really sure what you are looking for but I used the long blue hose in the picture below for mine. I couldn't even tell you what it is. You can pm mryellermp5 and ask him. He included it with the turbo kit that I bought from him. The hose has held up fine.

hmm that looks like a silicone coolant line. I'm using a heater hose for my return at the moment! Hope it holds up lol

 

[reynoldsrobbie]

I used a -10 SS line that was 18" long. It fits perfect if you put a 90* fitting on your oil pan.