negative terminal...

[MSP#735]

ok so im installing my grounding kit (1sty kit) and i am at the negative grounding part...what all do i remove and keep? can i just 'cut' the negative ground (factory) and replace with 1sty?? also, what kind of terminal do i need to do the negative side??? will this work for the negative side or do i need an actual 'monster' terminal?

 

[blynd_spy]

ok so im installing my grounding kit (1sty kit) and i am at the negative grounding part...what all do i remove and keep? can i just 'cut' the negative ground (factory) and replace with 1sty?? also, what kind of terminal do i need to do the negative side??? will this work for the negative side or do i need an actual 'monster' terminal?

assuming that the Negative terminal is the same on all models..

Here is the negative terminal removed, no cutting. you need to remove the battery plate to reach one of the bolts.
<img src="http://www.msprotege.com/members/blynd_spy/IMG_0442.jpg">
As for the terminal, the "monster" is just a recommendation. As long as the terminal isnt crimped and can be re-tightened it will work, i think you will need to get a new terminal for the positive though.

 

[MSP#735]

ok so here is what my set up will look like (terminals used that is)