Recent content by Guinnessman

By the way - I took your advise and bought new fluid

Alright guys, everything is now ok. s***, I still can not believe I've done this. After I found the correct drain plug I was scratching my head - I still wonder how many people have actually done this. Anyways, the trans seems perfectly fine, it actually shifts smoother than before :-) The...

I couldn't sleep all night. I'm about to take my gf to work in her car and than come back home to fix this mess. I'm hoping that both engine and trany are ok. They should be. Thanks for everyone's help! I know this seems funny, and what gets me is that I used to work in a shop when I was a...

Thank you all... I'll pray to God that the trans is ok.

It's clean, I put it in the oil bottles from the engine oil I poured in. I just hope the trans ok, I did put the car in reverse to move it of the ramps. I know I won't sleep tonight. So, I'll just funnel the old fluid back into the trans and I should be all set with the trans? What do you...

You mean the tube that I check the level with right? Can I put back the oil I drained accidently?

It's an automatic trans. I just can't believe I did this! I've change oil milion times in my old car. Yes, I realize there is way too much oil in the engine... that's a easy fix, as long as I use the right drain plug. Do you think the trans ok? What about warranty? will the dealer void it?

I see the fill level dip stick, but the opening obviously seems too small to fill with oil. I hope I didn't ruin the trans by putting it in reverse with barely any oil in it.

I've got a huge problem! I decided to change my oil in my mazda3. I figured that it would be fun, since I've done it many times on my previous car. I drained the trasmission fluid instead of the engine oil!!!! I put in the new oil, but it was high so I started the engine and put in reverse...

Got wake, didn't I tell you to get a girlfriend once? I mean you know way too much about all this car audio stuff!!! You've helped me before with the JL audio amp and today I was looking for some info on Dynamat...and sure enough Got wake helps out!!! way to go dude. Thanks again. PS: I was...

The JL Audio 500/1 is installed, all wiring completed, the system put together and I'm deaf...picture perfect (cool) The subs hit hard and the level control is not even half way up, and the initial gain is only at +3db (JL's recommendation) I'm blown away guys (flame2) You were all right about...

Got Wake, thanks for your help. I'm about to order all the needed supplies. I'll keep everyone posted on how the system turns out!

I'll do it than. Let me get this right thought. I will need two of the RCA connectors, one for right and left channel. Than, I'll need to connect positive to the pin and the negative to the shielding. Should I do the rear right +, rear right -, rear left + and rear left-? Hopefully I'll be able...

Wow, those look great. Is it hard to solder the spearker wire to them? Any tips? PS: You guys rock with all the help!

Like I said :-) this will be a little bit complicated. I'll give it a try thought. I know there are professional adopters out there, but I'm not finding any online and don't think I'll find one in a local store. Any suggestions?