-
-
KKedis82ZE8 replied to the thread What is this part called?I had a leak there too. It was rear main seal leak that was eventually fixed under warranty. It was a battle...
-
KKedis82ZE8 replied to the thread Which years/trim levels had Remote Start from factory?OEM “kit” for Gen 1 https://www.mazdaswag.com/oem-parts/mazda-remote-engine-start-c930v7620a
-
KKedis82ZE8 reacted to N7turbo's post in the thread Which years/trim levels had Remote Start from factory? with
Like.
For the first generation, there was an option for a dealer-installed, separate fob, remote start. But it was never a standard feature. -
KKedis82ZE8 reacted to ColoradoDriver's post in the thread Any tips for changing spark plugs? with Like.
Thank you for this. I am gearing up to do my spark plugs again at 150k miles and was looking into a proper 14mm socket. I already got...
-
Kditto I paid the Mazda tax...expensive but for me spending on 4 plugs every 40,000 miles is not a big deal...
-
KKedis82ZE8 reacted to 2019 CX5 GT's post in the thread Any tips for changing spark plugs? with Like.
Certain things i dont buy on amazon..
-
KKedis82ZE8 reacted to N7turbo's post in the thread Cylinder deactivation reliability, issues, how when it works with Like.
Do we know if this actually stops the transmission pendulum? Not that this would stop the clutches from disintegrating, but I'm curious.
-
KKedis82ZE8 reacted to minnesotaart's post in the thread Any tips for changing spark plugs? with Like.
Ditto
-
KI have the same socket. I like that it has the springs to grip the plug and no rubber insert to fall out.
-
KThese have been available for a long time. See mikstoreph.com (Mazda iStop Disabler Kit) or Aliexpress, where they are probably...
-
KKedis82ZE8 replied to the thread Any tips for changing spark plugs?I used this socket https://www.amazon.com/dp/B01MXJ3X7P/
-
KKedis82ZE8 replied to the thread Cylinder deactivation reliability, issues, how when it worksOnly method I've seen will give you a CEL mode but doesn't appear to cause vehicle to go into limp mode. One would reportedly have to...
-
KKedis82ZE8 replied to the thread Switched to 5W-30 from 0W-20I need to monitor mine via OBD some morning to see how long it takes to get to full operating temp… I’ve never noticed it to be slow to...
-
KMy drive to work is also 8-10 minutes at 35-40mph. Both my 2.5T and 2.0 reach the 210 mark on the gauge during that drive and start...
-
KKedis82ZE8 replied to the thread Switched to 5W-30 from 0W-20I would think the the turbo cars would have to heat up faster than NA due to turbo heat soak via the liquid cooling.
-
-
Loading…
-
Loading…
-
Loading…
-
Loading…
