What have you done to your CX-5 today?

[Steel Magnolia]

Plugged in a 32GB USB stick in the CX-5 to house all my music and audio books, still have room for more. Radio and Satellite (pay for radio, lol) be-gone!

Well that's cool!

Thanks for the pic! Sorry for the scrape but glad that's been resolved with the new wheel!

 

[FiveCX-5]

That`s a shame, Chris.....rather new and now also scratched, you`ll have to be sad.............(bang)

 

[Chris_Top_Her]

Installed Yellow Top Optima battery. Started to install my roof rails but I don't have an appropriate tool to cleanly cut the metal band under the trim.

 

[duynguyen]

oval exhausts, removed reflector and rear fog

 

[paris1]

Need to slow/separate these pics so we can see what we're looking at. Especially how the oval exhaust was done.

 

[cjecpa]

Like the looks but agree with paris1 post more photos getting dizzy at the back and forth picture.

 

[duynguyen]

Before

After

 

[paris1]

OK, so you used the existing cutouts from the reflectors for the new exhaust tips, but how did you close off the old exhaust cutouts on the bottom of the valance??

 

[duynguyen]

http://www.mazdas247.com/forum/showthread.php?123838038-Oval-exhausts

link to my original thread FYI
The shop filled it up with plastic then sanded it down with some kinda bond and re-painted it

 

[felixd]

http://www.mazdas247.com/forum/showthread.php?123838038-Oval-exhausts

link to my original thread FYI
The shop filled it up with plastic then sanded it down with some kinda bond and re-painted it

Very nice setup did u change the muffler or just the exhaust tips ?

 

[Chris_Top_Her]

Got my lower bar in today. I'll go to a lift and install it tomorrow.

http://i.ebayimg.com/00/s/NjAwWDYwMA==/z/IuMAAOxy4t1ShH5F/$_3.JPG

Already have stb


I was worried about AWD fitment but from what I could squeeze under the car it looks good; once I'm for sure I'm getting the rear. http://www.ebay.com/itm/Ultra-Racin...Parts_Accessories&hash=item27db7316f4&vxp=mtr

 

[metalfab]

Got my lower bar in today. I'll go to a lift and install it tomorrow.

http://i.ebayimg.com/00/s/NjAwWDYwMA==/z/IuMAAOxy4t1ShH5F/$_3.JPG

Already have stb


I was worried about AWD fitment but from what I could squeeze under the car it looks good; once I'm for sure I'm getting the rear. http://www.ebay.com/itm/Ultra-Racin...Parts_Accessories&hash=item27db7316f4&vxp=mtr

Looks good, do you feel a difference in the handling? I was debating making one for the front at work

 

[Chris_Top_Her]

On my car yes, stb alone removed some of the side sway when entering a hi check speed turn ( I have lower spring) lower bar not on yet. The stb is 108 shipped

 

[metalfab]

On my car yes, stb alone removed some of the side sway when entering a hi check speed turn ( I have lower spring) lower bar not on yet. The stb is 108 shipped

$108 is not bad. We have the right material at work and I have no issues fitting and welding one up, just a matter of me starting it.

 

[Chris_Top_Her]

$108 is not bad. We have the right material at work and I have no issues fitting and welding one up, just a matter of me starting it.

Yea went ahead and just ordered the rear lower as well http://www.ebay.com/itm/181265365815

 

[taimysho0]

wrapped my dash trim in carbon fiver this past weekend


<a href="http://s130.photobucket.com/user/taimysho0/media/IMG_20140213_134248_zpst370kjrg.jpg.html" target="_blank"><img src="http://i130.photobucket.com/albums/p242/taimysho0/IMG_20140213_134248_zpst370kjrg.jpg" border="0" alt=" photo IMG_20140213_134248_zpst370kjrg.jpg"/></a>

 

[Chris_Top_Her]

Had my front trannsfer and rear diff oil drained and filled.

 

[metalfab]

I referred my sis-in-law to the Mazda dealership I go to and she ended up getting a 2011 Mazda 3 Sport. I received a $100 for doing so but asked if i could get this instead:

Stainless steel rear bumper guard

 

[undergrad.]

I referred my sis-in-law to the Mazda dealership I go to and she ended up getting a 2011 Mazda 3 Sport. I received a $100 for doing so but asked if i could get this instead:

Stainless steel rear bumper guard

I didn't know they had these for the CX-5

 

[metalfab]

I didn't know they had these for the CX-5

I didn't know either, initially thought I was getting a plain black plastic one. Next time I'll post a better photo with the rear door down, it's snowing right now.