What have you done to your MSP today?

I tried to lean it out more, but somehow am running more rich... That makes no sense to me...
 
A router works great and it saves tons of money if you already have one.

Just get a exhaust shop to extend it should be that expensive.

And if you didn't extend it out, would it not fit ? And I have a corksport J pipe and SLS mid pipe too, so I would only need from there on I guess....
 
And if you didn't extend it out, would it not fit ? And I have a corksport J pipe and SLS mid pipe too, so I would only need from there on I guess....
You want a cat back exhaust. A p5 exhaust will stop about 6 inches short. Magna flow makes one for both sedan and hatchbacks
 
Just get a P5 eBay exhaust for like $150
 
Doesn't the magna flow go for around $450-$500 though ?

No clue, I just know they make one. Really you're cheapest option would be go to shop and ask for an axle back. You could even provide the muffler. Just need a 2.5 inlet
 
No clue, I just know they make one. Really you're cheapest option would be go to shop and ask for an axle back. You could even provide the muffler. Just need a 2.5 inlet

That's what I did. But it was just a replacement because the car didn't have ANY exhaust when I got it and couldn't stand it. Just a 2.25 from the rear cat, resonator, muffler, tail pipe for $125, but they did all my exhaust work for me at my other shop so they gave me a deal. Now I'm considering a 3" from the J-pipe back to a CS axleback. But I've got a 3 year old, so 3" may be too loud...
 
I have the Cs 3" with the silencer. And 70 duro front and rear mm and just got the OK from the wife. I have also put sound deadner in the trunk and under the rear seat
 
Last edited:
I have the Cs 3" with the silencer. And 70 duro front and rear mm and just got the OK from the wife. I have also put sound deadner in the trunk and under the rear seat
My ex HATED my car after the AWR 88 duros got installed, especially on start up.
 
So my best bet is to go to a custom exhaust shop and see how much for axel back ...

I would say so. With having an sls mid pipe you don't really need to replace the next part with the resonator. You might be able to get your money back selling the stock axle back
 
Next to a ls2 swapped rear mount 67mm turblow 280z. Pretty beastly!
2012-09-07205759.jpg
 
Very nice. Wanting to get a ls in the rx7 and get that project going. Gotta fix the msp, paint the miata and some other stuff.....then....rx7 time 500-600 ho to the ground here we come. Lol
 
Back