What have you done to your Mazda6 today?

[JDM-P5]

I hear the ebay downpipes are quite nice & as good as the big $ ones.
Next few months I'll get that. FMIC next year lol.

 

[dave_PEI]

whole new clutch assembly.... warranty verdict should be in by the end of the day... so it should only set me back the cost of a new clutch disk

 

[batou079]

Yea the weather was crappy and it was getting towards sunddown. I will take more pics. The wheels weight 18.5 lbs each so thats what 5 lbs less than the factory ones at each corner. Yea there is an 18x8 but the ET was 35 theres also an 18x8.5 ET45 I thought about getting those two but I stuck with these. I can always get a 5-10mm spacer to help a little if I want it more flush.

OH? they are 35 offset? hmm so very close to flush eh? do they have anything with more offset like 28 or less? the stockers i have 15mm spacers on and they still have like 10mm to go flush! argh
LOVE to hear that their weight is so much lighter too, as pretty as they are id actually try to track with em,

I hear the ebay downpipes are quite nice & as good as the big $ ones.
Next few months I'll get that. FMIC next year lol.

I forget, but hopefully you already have an AP. Cause as soon as you install the DP, get it tuned right. Otherwise your risk of smoking turbo goes up. Seals could start leaking oil if you dont tune it since the pressure is changed back there.

whole new clutch assembly.... warranty verdict should be in by the end of the day... so it should only set me back the cost of a new clutch disk

dyamn, that sucks, im dreading the day my clutch goes. Or tranny... ugh feels like both are trouble already.
anyway GL meng, i hope the costs stay real low.

 

[KrGsMrNKusinagi]

OH? they are 35 offset? hmm so very close to flush eh? do they have anything with more offset like 28 or less? the stockers i have 15mm spacers on and they still have like 10mm to go flush! argh
LOVE to hear that their weight is so much lighter too, as pretty as they are id actually try to track with em,

They have a 35 offset the 18x8.. Mine is the 18x7.5 et 45.. The weight is 18.5lbs each so they are lighter than the stockers. They make some others ones as well 18x8.5 ET 45 etc on up

 

[JDM-P5]

I won't install a dp until I have an ap to tune...no way jose.

Ahem...please imagine this if you will...the image would be facing forward (front of face towards front of car)...image would cover a bit of the rear quarter panel/window/rear door...I can't explain it without a visual.

I wish I was good @ photoshop to show you what i'm imagining right now...

#attackpanda

 

[mglavina]

^^ On the window? Or body of the car?

 

[batou079]

JDM-P5, that picture is sweet! pandas ftw... but on your car?? hmmmm

They have a 35 offset the 18x8.. Mine is the 18x7.5 et 45.. The weight is 18.5lbs each so they are lighter than the stockers. They make some others ones as well 18x8.5 ET 45 etc on up

ah ok, im curious how the 18x @ 35 offset would sit, hmmmmm

 

[JDM-P5]

^^ On the window? Or body of the car?

Both

JDM-P5, that picture is sweet! pandas ftw... but on your car?? hmmmm

Yes.
I think once I get it made & printed up at a shop and put on, it'll look good.

Kinda like this...

 

[mglavina]

JDM give me some high res pics of your car

 

[JDM-P5]

JDM give me some high res pics of your car

I don't have any good side view pics....here's one of Taylors old wwp.

 

[JDM-P5]

Another...

 

[mglavina]

I kinda attempted it... does not look good IMO... that pic has got too much distortion and detail, looks like it's getting ripped apart. Would be hard to picture something like that with all the different shades on half your car/window.

 

[KrGsMrNKusinagi]

Couple more pics..

I still need to take some broad daylight pics

 

[JDM-P5]

I kinda attempted it... does not look good IMO... that pic has got too much distortion and detail, looks like it's getting ripped apart. Would be hard to picture something like that with all the different shades on half your car/window.

I figure the black/gray parts would be on the white and then the white/gray would be on the tinted window...as stated its something I'm toying around with. If it gets resized into something smaller, that's to be determined lol. I'd actually have to go a shop, have them scan & render something up and then see what becomes of it.

 

[04gixx6]

KrGsMrNKusinagi- I hate you.... I hate you so much. Your car looks sick. I almost pulled the trigger on those same wheels. Instead pulled the trigger on getting a girlfriend that DRAINED me. And is now my wife.....Anyway.

 

[Qwik6]

Couple more pics..

I still need to take some broad daylight pics

I like.

 

[zinger002]

Auto exe or nextmod downforcers?

 

[KrGsMrNKusinagi]

Auto exe or nextmod downforcers?

Everything i have is autoexe except for the rear roof spoiler

 

[zinger002]

overpriced lol jk.

 

[OJ Bartley]

Slow morning at work so I took a crack at it... I think there's too much going on. I didn't have any hi res pics of my car here so I just used the one you provided of Taylor's.